CC3135
- Integrated dual-band Wi-Fi and internet protocols
- 802.11a/b/g/n: 2.4GHz and 5GHz
- FIPS 140-2 Level 1 certification
- Rich set of IoT security features helps developers protect data
- Low-power modes for battery powered application
- Coexistence with 2.4GHz radios
- Industrial temperature: –40°C to +85°C
- Transferable Wi-Fi Alliance certification
- Wi-Fi network processor subsystem:
- Wi-Fi core:
- 802.11a/b/g/n 2.4GHz and 5GHz
- Modes:
- Access point (AP)
- Station (STA)
- Wi-Fi Direct (only supported on 2.4GHz)
- Security:
- WEP
- WPA™/ WPA2™ PSK
- WPA2 Enterprise
- WPA3™ Personal
- WPA3™ Enterprise
- Internet and application protocols:
- HTTPs server, mDNS, DNS-SD, DHCP
- IPv4 and IPv6 TCP/IP stack
- 16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)
- Built-in power management subsystem:
- Configurable low-power profiles (always, intermittent, tag)
- Advanced low-power modes
- Integrated DC/DC regulators
- Wi-Fi core:
- Multilayered security features:
- Separate execution environments
- Networking security
- Device identity and key
- Hardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)
- Application-level security (encryption, authentication, access control)
- Initial secure programming
- Software tamper detection
- Secure boot
- Certificate signing request (CSR)
- Unique per device key pair
- Application throughput:
- UDP: 16Mbps, TCP: 13Mbps
- Peak: 72Mbps
- Power-management subsystem
- Integrated DC/DC converters support a wide range of supply voltage:
- VBAT wide-voltage mode: 2.1V to 3.6V
- VIO is always tied with VBAT
- Advanced low-power modes:
- Shutdown: 1µA, hibernate: 4µA
- Low-power deep sleep (LPDS): 120µA
- Idle connected (MCU in LPDS): 710µA
- RX traffic (MCU active): 53mA
- TX traffic (MCU active): 223mA
- Integrated DC/DC converters support a wide range of supply voltage:
- Wi-Fi TX power:
- 2.4GHz: 18.0dBm at 1 DSSS
- 5GHz: 18.1dBm at 6 OFDM
- Wi-Fi RX sensitivity:
- 2.4GHz: –96dBm at 1 DSSS
- 5GHz: –92dBm at 6 OFDM
- Clock source:
- 40.0MHz crystal with internal oscillator
- 32.768kHz crystal or external RTC
- RGK package
- 64-pin, 9mm × 9mm very thin quad flat nonleaded (VQFN) package, 0.5mm pitch
- Device supports SimpleLink™ MCU Platform developer’s ecosystem
Connect any microcontroller (MCU) to the Internet of Things (IoT) with the CC3135 device, a dual-band wireless network processor from Texas Instruments. The CC3135 Wi-Fi® Internet-on-a chip™ device contains an Arm Cortex-M3 MCU dedicated to Wi-Fi® and internet protocols, to offload networking activities from the host MCU. The subsystem includes a dual-band 802.11a/b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption and a built-in power management for best-in-class low-power performance.
The Wi-Fi CERTIFIED® CC3135 device dramatically simplifies the implementation of low-power, with the integrated Wi-Fi Alliance® IoT low power feature.
This generation introduces new capabilities that further simplify the connectivity of things to the Internet. The main new features include:
- 802.11a (5GHz) support
- BLE/2.4GHz radio coexistence
- Antenna selection
- Enhanced security with FIPS 140-2 Level 1 certification and more. For exact status of FIPS certification for a specific part number, refer to https://csrc.nist.gov/publications/fips.
- Up to 16 concurrent secure sockets
- Certificate sign request (CSR)
- Online certificate status protocol (OCSP)
- Wi-Fi Alliance® certified for IoT applications with low-power capabilities and more
- Hostless mode for offloading template packet transmissions
- Improved fast scan
The CC3135 device is delivered with a slim and user-friendly host driver to simplify the integration and development of networking applications. The host driver can easily be ported to most platforms and operating systems (OS). The driver has a small memory footprint and can run on 8-bit, 16-bit, or 32-bit microcontrollers with any clock speed (no performance or real-time dependency).
The CC3135 device is part of the SimpleLink™ MCU platform, a common, easy-to-use development environment based on a single core software development kit (SDK), rich tool set, reference designs, and E2E™ community which supports Wi-Fi®, Bluetooth® low energy, Sub-1GHz and host MCUs. For more information, visit www.ti.com/simplelink.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-CC3135 — SimpleLink™ Wi-Fi® CC3135 이중 대역 무선 네트워크 프로세서 BoosterPack™ 플러그인 모듈
CC31XXEMUBOOST — SimpleLink™ Wi-Fi® CC31xx BoosterPack™ 플러그인 모듈을 위한 고급 에뮬레이션 키트
This advanced emulation BoosterPack™ plug-in module is an accessory for the SimpleLink™ Wi-Fi® CC31xx wireless network processor BoosterPack plug-in modules
This accessory can be used for:
- Flashing updates to the CC31xxBOOST
- Using the CC3xxx radio tool for RF performance evaluation
- Using (...)
WIFISTARTERPRO — SimpleLink™ Wi-Fi® 스타터 프로
Google Play에서 다운로드
SimpleLink™ Wi-Fi® 스타터 프로 모바일 앱은 SimpleLink 프로비저닝을 위한 새로운 모바일 애플리케이션입니다. 장치 측에서 실행되는 임베디드 프로비저닝 라이브러리 및 예제와 함께 제공됩니다. 새로운 프로비저닝 릴리스는 SimpleLink Wi-Fi 제품을 사용한 Wi-Fi 프로비저닝을 위한 TI의 권장 사항입니다. 성공적인 프로세스를 보장하기 위해 피드백 및 폴백 옵션과 함께 고급 AP 모드 프로비저닝을 구현합니다. 고객은 임베디드 (...)
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 무선 테스팅 툴
IoT(사물 인터넷)용으로 제작된 SimpleLink Wi-Fi CC31xx 및 CC32xx 장치에는 온칩 Wi-Fi, 인터넷 및 (...)
CCSTUDIO — Code Composer Studio™ 통합 개발 환경(IDE)
Code Composer Studio는 사용자에게 각 애플리케이션 개발 단계를 안내하는 직관적인 사용자 인터페이스를 제공합니다. 최적화 C/C++ 컴파일러, 소스 코드 편집기, 프로젝트 빌드 (...)
SIMPLELINK-SDK-WIFI-PLUGIN — SimpleLink™ software development kit (SDK) Wi-Fi® plug-in
The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)
지원되는 제품 및 하드웨어
제품
Wi-Fi 제품
Arm Cortex-M4 MCU
저전력 2.4GHz 제품
하드웨어 개발
평가 보드
개발 키트
EMBEDDED-PROGRAMMING — SimpleLink™ Wi-Fi® 임베디드 프로그래밍
- Uniflash – 이미지 생성 및 프로그래밍을 제공하는 PC 기반 유틸리티입니다. 콘텐츠는 UART를 통해 프로그래밍됩니다.
- 무선 (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
지원되는 제품 및 하드웨어
제품
C2000 실시간 마이크로컨트롤러
산업용 mmWave 레이더 센서
차량용 mmWave 레이더 센서
MSP430 microcontrollers
Wi-Fi 제품
Arm Cortex-M4 MCU
Arm Cortex-M0+ MCU
Arm Cortex-R MCU
저전력 2.4GHz 제품
차량용 무선 커넥티비티 제품
Sub-1GHz 무선 MCU
오디오 및 레이더 DSP SoC
멀티미디어 및 산업용 네트워킹 SoC
SIMPLELINK-CC3XXX-CERTIFICATION — SimpleLink™ CC3XXX에 대한 무선 인증
SIMPLELINK-WIFI-DESIGN-REVIEWS — SimpleLink™ Wi-Fi 장치에 대한 하드웨어 설계 검토
일반 설계 질문은 Wi-Fi 하드웨어 설계 검토를 요청하기 전에 E2E 포럼에 게시해야 합니다.
CC3301 및 CC3300 기반 설계의 경우 설계 파일을 사용하여 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGK) | 64 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.