AM5718
- Arm® Cortex®-A15 microprocessor subsystem
- C66x floating-point VLIW DSP
cores
- Fully object-code compatible with C67x and C64x+
- Up to thirty-two 16 × 16-bit fixed-point multiplies per cycle
- Up to 512KB of on-chip L3 RAM
- Level 3 (L3) and level 4 (L4) interconnects
- DDR3/DDR3L External Memory Interface (EMIF)
module
- Supports up to DDR3-1333 (667 MHz)
- Up to 2GB across single chip select
- 2x Dual Arm® Cortex®-M4 coprocessors (IPU1 and IPU2)
- IVA-HD subsystem
- 4K @ 15fps encode and decode support for H.264 CODEC
- Other CODECs are up to 1080p60
- Display
subsystem
- Full-HD video (1920 × 1080p, 60 fps)
- Multiple video inputs and video outputs
- 2D and 3D graphics
- Display controller with DMA engine and up to three pipelines
- HDMI™ encoder: HDMI 1.4a and DVI 1.0 compliant
- 2x dual-core Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS)
- Accelerator (BB2D)
subsystem
- Vivante® GC320 core
- Video Processing Engine (VPE)
- Available single-core PowerVR® SGX544 3D GPU
- Secure boot support
- Hardware-enforced root-of-trust
- Customer programmable keys (SR 2.1)
- Support for takeover protection, IP protection, and anti-roll back protection
- Cryptographic
acceleration support
- Supports cryptographic cores
- AES – 128/192/256-bits key sizes
- 3DES – 56/112/168-bits key sizes
- MD5, SHA1
- SHA2 – 224/256/384/512
- True random number generator
- DMA support
- Supports cryptographic cores
- Debug security
- Secure software controlled debug access
- Security aware debugging
- Trusted
Execution Environment (TEE) support
- Arm® TrustZone® based TEE
- Extensive firewall support for isolation
- Secure DMA path and interconnect
- Secure Watchdog/Timer/IPC
- One Video Input Port (VIP)
module
- Support for up to four multiplexed input ports
- General-Purpose Memory Controller (GPMC)
- Enhanced Direct Memory Access (EDMA) controller
- 2-Port Gigabit Ethernet switch
- Sixteen 32-bit general-purpose timers
- 32-bit MPU watchdog timer
- Five high speed Inter-Integrated Circuit (I2C™) ports
- HDQ/1-Wire® interface
- Ten configurable UART/IrDA/CIR modules
- Four Multichannel Serial Peripheral Interfaces (McSPI)
- Quad Serial Peripheral Interface (QSPI)
- SATA Gen2 interface
- Eight Multichannel Audio Serial Port (McASP) modules
- SuperSpeed USB 3.0 dual-role device
- High Speed USB 2.0 dual-role device
- Four MultiMedia Card/Secure Digital®/Secure Digital Input Output interfaces (MMC™/SD®/SDIO)
-
PCI-Express® (PCIe®) revision 3.0 subsystems with two 5-Gbps
lanes
- One 2-lane Gen2-compliant port
- or Two 1-lane Gen2-compliant ports
- Dual Controller Area Network (DCAN)
modules
- CAN 2.0B protocol
- MIPI® Camera Serial Interface 2 (CSI-2)
- Up to 215 General-Purpose I/O (GPIO) pins
- Power, reset, and clock management
- On-chip debug with CTools technology
- 28-nm CMOS technology
- 23 mm × 23 mm, 0.8-mm pitch, 760-pin BGA
AM571x Sitara™ processors are Arm® applications processors built to meet the intense processing needs of modern embedded products.
AM571x devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set.
Programmability is provided by a single-core Arm® Cortex®-A15 RISC CPU with Arm® Neon™ extensions and a TI C66x VLIW floating-point DSP core. The Arm® processor lets developers keep control functions separate from vision algorithms programmed on the DSP and coprocessors, thus reducing the complexity of the system software.
Additionally, TI provides a complete set of development tools for the Arm® and C66x DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.
Cryptographic acceleration is available in all devices. All other supported security features, including support for secure boot, debug security and support for trusted execution environment is available on High-Security (HS) devices. For more information about HS devices, contact your TI representative.
The AM571x Sitara Arm processor family is qualified according to the AEC-Q100 Standard.
기술 자료
설계 및 개발
전원 공급 솔루션
AM5718에 사용 가능한 전원 공급 솔루션을 찾아보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
TMDXIDK5718 — AM571x IDK(산업용 개발 키트)
TMDXIDK5718: AM571x 산업용 개발 키트(IDK)는 산업용 애플리케이션을 대상으로 하는 Cortex A-15가 포함된 싱글 코어 AM57x를 지원합니다.
- 동시 6포트 이더넷, 2xRGMII 및 4xMII 지원
- 동시 마스터/슬레이브, 마스터/마스터 또는 슬레이브/슬레이브 작동을 위한 통합 산업용 이더넷 및 필드버스 프로토콜
- 고속 병렬 외부 인터페이스를 위한 PCIe 및 GPMC 확장 포트
- 머신 비전 애플리케이션 지원을 위한 카메라 도터 카드
- 확장 가능한 HMI 애플리케이션을 위한 옵션 10" 정전식 터치 디스플레이
- HLOS에 대한 (...)
ADVAN-3P-SITARA-SOMS — Advantech Sitara SOM 및 SBC
BEAGLEBOARD-X15 — BeagleBoard-X15 개발 보드
COMPU-3P-SITARASOMS — Compulab Sitara SOM
CRLNK-3P-SOMS — Critical Link system on modules for TI ARM-based Processors
Critical Link is a US-based embedded systems company offering System on Modules (SoMs) and scientific imaging platforms for electronic applications around the world. The MitySOM® and MityDSP® families incorporate DSP, FPGA, and ARM technologies, and are designed for long product lifespan and (...)
ELESAR-3P-SITARA-SOMS — Elesar Sitara SOM
FORLX-3P-SITARA-SOMS — Forlinx Sitara SOM
TQ-3P-SITARASOMS — TQ Group Sitara SOM
PROCESSOR-SDK-LINUX-AM57X — Linux Processor SDK for AM57x
프로세서 SDK(소프트웨어 개발 키트)는 TI 임베디드 프로세서를 위한 통합 소프트웨어 플랫폼으로, 이를 통해 벤치마크와 데모를 손쉽게 설정하고 빠르고 간편하게 액세스할 수 있습니다. 프로세서 SDK의 모든 릴리스는 TI의 광범위한 포트폴리오 내에서 일관되므로 개발자는 디바이스간에 소프트웨어를 자유롭게 재사용하고 마이그레이션할 수 있습니다. 프로세서 SDK와 TI의 임베디드 프로세서 솔루션을 사용하면 그 어느 때보다 쉽게 확장 가능한 플랫폼 솔루션을 개발할 수 있습니다.
프로세서 SDK v.02.xx에는 Linux 및 (...)
PROCESSOR-SDK-LINUX-RT-AM57X — Linux-RT Processor SDK for AM57x
프로세서 SDK(소프트웨어 개발 키트)는 TI 임베디드 프로세서를 위한 통합 소프트웨어 플랫폼으로, 이를 통해 벤치마크와 데모를 손쉽게 설정하고 빠르고 간편하게 액세스할 수 있습니다. 프로세서 SDK의 모든 릴리스는 TI의 광범위한 포트폴리오 내에서 일관되므로 개발자는 디바이스간에 소프트웨어를 자유롭게 재사용하고 마이그레이션할 수 있습니다. 프로세서 SDK와 TI의 임베디드 프로세서 솔루션을 사용하면 그 어느 때보다 쉽게 확장 가능한 플랫폼 솔루션을 개발할 수 있습니다.
프로세서 SDK v.02.xx에는 Linux 및 (...)
PROCESSOR-SDK-RTOS-AM57X — RTOS Processor SDK for AM57x
프로세서 SDK(소프트웨어 개발 키트)는 TI 임베디드 프로세서를 위한 통합 소프트웨어 플랫폼으로, 이를 통해 벤치마크와 데모를 손쉽게 설정하고 빠르고 간편하게 액세스할 수 있습니다. 프로세서 SDK의 모든 릴리스는 TI의 광범위한 포트폴리오 내에서 일관되므로 개발자는 디바이스간에 소프트웨어를 자유롭게 재사용하고 마이그레이션할 수 있습니다. 프로세서 SDK와 TI의 임베디드 프로세서 솔루션을 사용하면 그 어느 때보다 쉽게 확장 가능한 플랫폼 솔루션을 개발할 수 있습니다.
프로세서 SDK v.02.xx에는 Linux 및 (...)
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
AM57X-ACADEMY — AM57x academy
GHS-INTEGRITY-RTOS — Green Hills INTEGRITY RTOS
GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS
The µ-velOSity™ Safety RTOS is the smallest of Green Hills Software's real-time operating systems and was designed especially for microcontrollers. It supports a wide range of TI processor families using the Arm® Cortex-M or Cortex-R cores as a main CPU or as a co-processors (...)
MG-3P-NUCLEUS-RTOS — Mentor Graphics Nucleus RTOS
QNX-3P-NEUTRINO-RTOS — QNX Neutrino RTOS
FFTLIB — 부동 소수점 디바이스용 FFT 라이브러리
The Texas Instruments FFT library is an optimized floating-point math function library for computing the discrete Fourier transform (DFT).
MATHLIB — 부동 소수점 디바이스용 DSP 수학 라이브러리
PRU-ICSS-ETHERCAT-SLAVE — PRU-ICSS software for EtherCAT slave
PRU-ICSS 프로토콜은 TI Sitara 프로세서를 위한 실시간 산업용 통신을 지원합니다. PRU-ICSS 프로토콜은 TI의 통합 소프트웨어 개발 플랫폼인 Processor-SDK-RTOS를 기반으로 사용하도록 구축되었으며 최적화된 PRU-ICSS 펌웨어, ARM 프로세서에 해당하는 PRU-ICSS 드라이버 및 예제 애플리케이션을 포함하고 있습니다. PRU-ICSS 펌웨어는 PRU 코어에서 실행되며 기본 ARM 프로세서에서 시간이 중요한 링크 계층 프로세싱을 오프로드하고 TI-RTOS를 실행합니다. PRU-ICSS 드라이버는 (...)
PRU-ICSS-ETHERNETIP-ADAPTER — PRU-ICSS software for EtherNetIP adapter
PRU-ICSS 프로토콜은 TI Sitara 프로세서를 위한 실시간 산업용 통신을 지원합니다. PRU-ICSS 프로토콜은 TI의 통합 소프트웨어 개발 플랫폼인 Processor-SDK-RTOS를 기반으로 사용하도록 구축되었으며 최적화된 PRU-ICSS 펌웨어, ARM 프로세서에 해당하는 PRU-ICSS 드라이버 및 예제 애플리케이션을 포함하고 있습니다. PRU-ICSS 펌웨어는 PRU 코어에서 실행되며 기본 ARM 프로세서에서 시간이 중요한 링크 계층 프로세싱을 오프로드하고 TI-RTOS를 실행합니다. PRU-ICSS 드라이버는 (...)
PRU-ICSS-HSR-PRP-DAN — PRU-ICSS software for HSR/PRP
PRU-ICSS 프로토콜은 TI Sitara 프로세서를 위한 실시간 산업용 통신을 지원합니다. PRU-ICSS 프로토콜은 TI의 통합 소프트웨어 개발 플랫폼인 Processor-SDK-RTOS를 기반으로 사용하도록 구축되었으며 최적화된 PRU-ICSS 펌웨어, ARM 프로세서에 해당하는 PRU-ICSS 드라이버 및 예제 애플리케이션을 포함하고 있습니다. PRU-ICSS 펌웨어는 PRU 코어에서 실행되며 기본 ARM 프로세서에서 시간이 중요한 링크 계층 프로세싱을 오프로드하고 TI-RTOS를 실행합니다. PRU-ICSS 드라이버는 (...)
PRU-ICSS-PROFIBUS-SLAVE — PRU-ICSS software for PROFIBUS slave
PRU-ICSS 프로토콜은 TI Sitara 프로세서를 위한 실시간 산업용 통신을 지원합니다. PRU-ICSS 프로토콜은 TI의 통합 소프트웨어 개발 플랫폼인 Processor-SDK-RTOS를 기반으로 사용하도록 구축되었으며 최적화된 PRU-ICSS 펌웨어, ARM 프로세서에 해당하는 PRU-ICSS 드라이버 및 예제 애플리케이션을 포함하고 있습니다. PRU-ICSS 펌웨어는 PRU 코어에서 실행되며 기본 ARM 프로세서에서 시간이 중요한 링크 계층 프로세싱을 오프로드하고 TI-RTOS를 실행합니다. PRU-ICSS 드라이버는 (...)
PRU-ICSS-PROFINET-SLAVE — PRU-ICSS software for Profinet slave
PRU-ICSS 프로토콜은 TI Sitara 프로세서를 위한 실시간 산업용 통신을 지원합니다. PRU-ICSS 프로토콜은 TI의 통합 소프트웨어 개발 플랫폼인 Processor-SDK-RTOS를 기반으로 사용하도록 구축되었으며 최적화된 PRU-ICSS 펌웨어, ARM 프로세서에 해당하는 PRU-ICSS 드라이버 및 예제 애플리케이션을 포함하고 있습니다. PRU-ICSS 펌웨어는 PRU 코어에서 실행되며 기본 ARM 프로세서에서 시간이 중요한 링크 계층 프로세싱을 오프로드하고 TI-RTOS를 실행합니다. PRU-ICSS 드라이버는 (...)
SPRC264 — TMS320C5000/6000 IMGLIB(이미지 라이브러리)
C5000/6000 이미지 처리 라이브러리(IMGLIB)는 C 프로그래머를 위한 최적화된 이미지/비디오 처리 기능 라이브러리입니다. 여기에는 일반적으로 계산 집약적 실시간 애플리케이션에서 사용되는 C 호출 가능한 범용 이미지/비디오 처리 루틴이 포함되어 있습니다. 이 루틴을 사용하면 상응하는 표준 ANSI C 언어 코드보다 더 높은 성능을 달성할 수 있습니다. IMGLIB는 즉시 사용할 수 있는 DSP 기능을 소스 코드와 함께 제공하여 애플리케이션 개발 시간을 크게 단축시킬 수 있습니다.
벤치마크 확인: DSP 코어 벤치마크
SPRC265 — TMS320C6000 DSP 라이브러리(DSPLIB)
TMS320C6000 DSPLIB(디지털 신호 프로세서 라이브러리)는 C 프로그래머를 위한 플랫폼에 최적화된 DSP 기능 라이브러리입니다. 여기에는 일반적으로 계산 집약적 실시간 애플리케이션에서 사용되는 C 호출 가능한 범용 신호 처리 루틴이 포함되어 있습니다. 이 루틴을 사용하면 상응하는 표준 ANSI C 언어 코드보다 더 높은 성능을 달성할 수 있습니다. DSPLIB는 즉시 사용할 수 있는 DSP 기능을 소스 코드와 함께 제공하여 애플리케이션 개발 시간을 크게 단축시킬 수 있습니다.
벤치마크 확인: DSP 코어 벤치마크
WIT-3P-SITARABSP — Witekio Sitara Android 및 Windows 운영 체제
C66XCODECS — 코덱 - 비디오, 음성 - C66x 기반 디바이스
TI codecs are free, come with production licensing and are available for download now. All are production-tested for easy integration into video and voice applications. In many cases, the C64x+ codecs are provided and validated for C66x platforms. Datasheets and Release Notes are on the download (...)
ITTIAM-3P-CODECS — Ittiam 코덱
Ittiam provides high quality, high performance multimedia centric products and solutions. Ittiam brings extensive media expertise and more than a decade's experience on Texas Instruments processors. Leverage Ittiam’s rich portfolio of proven, high-performance audio codecs to build an array of (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.
UniFlash는 CCStudio™ 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.
macOS는 mmWave, AMx, K2G 및 (...)
CLOCKTREETOOL — Sitara, 오토모티브, 비전 분석 및 디지털 신호 프로세서용 클록 트리 툴
The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:
- Visualize the device clock tree
- Interact with clock tree (...)
POWEREST — 전력 예상 툴(PET)
PET(전력 예상 툴)은 사용자가 일부 TI 프로세서의 소비 전력에 대한 인사이트를 얻게 해줍니다. 이 툴에는 사용자가 여러 가지 애플리케이션 시나리오를 선택하여 소비 전력뿐 아니라, 전체 소비 전력을 더 줄이기 위해 고급 전력 절약 기법을 적용하는 방법을 파악할 수 있는 기능이 포함되어 있습니다.
AM57x 및 AM437x 프로세서용 PET:
이 다운로드 가능한 스프레드시트는 사용자가 애플리케이션에 필요한 장치 매개 변수를 입력하는 메커니즘입니다. 매개 변수로는 IP 활동/로딩, 원하는 전력 상태 및 전력 관리 사용량 등이 (...)
많은 TI 레퍼런스 설계에는 AM5718이(가) 포함됩니다.
레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| FCBGA (ABC) | 760 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.