홈 마이크로컨트롤러(MCU) 및 프로세서 Microcontrollers Real-time digital power MCUs
홈
마이크로컨트롤러(MCU) 및 프로세서
Microcontrollers
Real-time digital power MCUs
신규

F28E120SB

미리 보기

160MHz, 64KB 플래시, FPU, PGA를 지원하는 C2000™ 32비트 MCU

지금 주문하기
데이터 시트
사용자 가이드
정오표

F28E120SB

미리 보기
데이터 시트 지금 주문하기

제품 상세 정보

CPU 1 C28 Frequency (MHz) 160 Flash memory (kByte) 64 RAM (kByte) 16 ADC type 12-bit ADC Total processing (MIPS) 160 Features 32-bit CPU timers, Dual security zones, FPU32, Programmable gain amplifier, Watchdog timer UART 3 CAN (#) 0 PWM (Ch) 8 TI functional safety category Functional Safety-Compliant Number of ADC channels 10, 17 Direct memory access (Ch) 2 SPI 1 QEP 1 USB No Hardware accelerators Floating point unit Edge AI enabled Yes Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, SCI, SPI, UART Operating system BareMetal (No OS), FreeRTOS Nonvolatile memory (kByte) 64 Number of GPIOs 24, 26, 36 Number of I2Cs 1
CPU 1 C28 Frequency (MHz) 160 Flash memory (kByte) 64 RAM (kByte) 16 ADC type 12-bit ADC Total processing (MIPS) 160 Features 32-bit CPU timers, Dual security zones, FPU32, Programmable gain amplifier, Watchdog timer UART 3 CAN (#) 0 PWM (Ch) 8 TI functional safety category Functional Safety-Compliant Number of ADC channels 10, 17 Direct memory access (Ch) 2 SPI 1 QEP 1 USB No Hardware accelerators Floating point unit Edge AI enabled Yes Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, SCI, SPI, UART Operating system BareMetal (No OS), FreeRTOS Nonvolatile memory (kByte) 64 Number of GPIOs 24, 26, 36 Number of I2Cs 1
VQFN (RHB) 32 25 mm² 5 x 5
  • Real-time processing
  • On-chip memory
    • Up to 128KB (64KW) of single bank flash (ECC-protected)
    • 16KB (8KW) of RAM (Parity-protected)
    • Security
      • JTAGLOCK
      • Zero-pin boot
      • Dual-zone security
  • Clock and system control
    • Internal 32MHz oscillator with up to ±2% accuracy (SYSOSC)
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3V I/O design
    • Brownout reset (BOR) circuit
  • System peripherals
    • 27 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (8 shared with Analog)
    • 9 digital inputs on analog pins
    • One 2-channel Direct Memory Access (DMA) controller
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Unique Identification (UID) number
  • Communications peripherals
    • One Inter-integrated Circuit (I2C) interface

    • One high-speed (20Mbps) Universal Asynchronous Receiver/Transmitter (UART)

    • One Serial Peripheral Interface (SPI) port
    • Two UART-compatible Serial Communication Interfaces (SCIs)
  • Analog system
    • One 8.9 MSPS, 12-bit Analog-to-Digital Converter (ADC)
      • Up to 17 external channels (8 shared with GPIO)
      • Three integrated Post-Processing Blocks (PPB)
    • Three windowed comparators (CMPSS_LITE) with 10-bit effective reference DACs
      • Digital glitch filters
      • One DAC output (CMP3_LITE_DACL) available on a pin
    • One Programmable Gain Amplifier (PGA)
      • Unity gain support
      • Inverting and non-inverting gain mode support
      • Inputs with 3-to-1 multiplexer
      • Programmable output filtering
  • Enhanced control peripherals
    • 2 MCPWM modules, 8 total PWM channels (one 6-channel MCPWM module and one 2-channel module)
    • One Enhanced Capture (eCAP) module
    • One Enhanced Quadrature Encoder Pulse (eQEP) module with support for CW/CCW operation modes
  • CMAC Keys (128-bit) for SW AES
  • Package options:
    • 48-pin Low-Profile Quad Flat Pack (LQFP) [PT suffix]
    • 32-pin Low-Profile Quad Flat Pack (LQFP) [VFC suffix]
    • 32-pin Very Thin Quad Flatpack No-Lead (VQFN) [RHB suffix]
  • Temperature options:
    • Junction (TJ): –40°C to 125°C
  • Real-time processing
  • On-chip memory
    • Up to 128KB (64KW) of single bank flash (ECC-protected)
    • 16KB (8KW) of RAM (Parity-protected)
    • Security
      • JTAGLOCK
      • Zero-pin boot
      • Dual-zone security
  • Clock and system control
    • Internal 32MHz oscillator with up to ±2% accuracy (SYSOSC)
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3V I/O design
    • Brownout reset (BOR) circuit
  • System peripherals
    • 27 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (8 shared with Analog)
    • 9 digital inputs on analog pins
    • One 2-channel Direct Memory Access (DMA) controller
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Unique Identification (UID) number
  • Communications peripherals
    • One Inter-integrated Circuit (I2C) interface

    • One high-speed (20Mbps) Universal Asynchronous Receiver/Transmitter (UART)

    • One Serial Peripheral Interface (SPI) port
    • Two UART-compatible Serial Communication Interfaces (SCIs)
  • Analog system
    • One 8.9 MSPS, 12-bit Analog-to-Digital Converter (ADC)
      • Up to 17 external channels (8 shared with GPIO)
      • Three integrated Post-Processing Blocks (PPB)
    • Three windowed comparators (CMPSS_LITE) with 10-bit effective reference DACs
      • Digital glitch filters
      • One DAC output (CMP3_LITE_DACL) available on a pin
    • One Programmable Gain Amplifier (PGA)
      • Unity gain support
      • Inverting and non-inverting gain mode support
      • Inputs with 3-to-1 multiplexer
      • Programmable output filtering
  • Enhanced control peripherals
    • 2 MCPWM modules, 8 total PWM channels (one 6-channel MCPWM module and one 2-channel module)
    • One Enhanced Capture (eCAP) module
    • One Enhanced Quadrature Encoder Pulse (eQEP) module with support for CW/CCW operation modes
  • CMAC Keys (128-bit) for SW AES
  • Package options:
    • 48-pin Low-Profile Quad Flat Pack (LQFP) [PT suffix]
    • 32-pin Low-Profile Quad Flat Pack (LQFP) [VFC suffix]
    • 32-pin Very Thin Quad Flatpack No-Lead (VQFN) [RHB suffix]
  • Temperature options:
    • Junction (TJ): –40°C to 125°C

The F28E12x is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in motor drive applications.

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 160MHz of signal-processing performance for fixed-point code running from either on-chip flash or SRAM.

The F28E12x supports up to 128KB (64KW) of flash memory. Up to 16KB (8KW) of on-chip SRAM is also available to supplement the flash memory.

High-performance analog blocks are integrated into the F28E12x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Eight PWM channels enable control of various power stages from a 3-phase inverter to power-factor correction and other advanced multilevel power topologies.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, and UART) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000 real-time microcontrollers page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the LAUNCHXL-F28E12X development kit and download C2000Ware.

The F28E12x is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in motor drive applications.

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 160MHz of signal-processing performance for fixed-point code running from either on-chip flash or SRAM.

The F28E12x supports up to 128KB (64KW) of flash memory. Up to 16KB (8KW) of on-chip SRAM is also available to supplement the flash memory.

High-performance analog blocks are integrated into the F28E12x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Eight PWM channels enable control of various power stages from a 3-phase inverter to power-factor correction and other advanced multilevel power topologies.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, and UART) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000 real-time microcontrollers page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the LAUNCHXL-F28E12X development kit and download C2000Ware.
filter 기타 Real-time digital power MCUs 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
7개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet F28E12x Real-Time Microcontrollers datasheet (Rev. B) PDF | HTML 2025/10/22
* Errata F28E12x Real-Time MCUs Silicon Errata (Rev. A) PDF | HTML 2025/10/30
* User guide F28E12x Real-Time Microcontrollers Technical Reference Manual (Rev. A) PDF | HTML 2025/10/31
User guide TMS320F28E12x Flash API Version 5.00.00.00 Reference Guide PDF | HTML 2025/09/25
User guide Migration Between TMS320F280015x, TMS320F280013x, and F28E12x Guide PDF | HTML 2025/08/06
User guide Migration Between TMS320F2802x, TMS320F2803x and F28E12x Guide PDF | HTML 2025/08/06
User guide C2000 Real-Time Control Peripheral Reference Guide (Rev. U) PDF | HTML 2025/07/11

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LAUNCHXL-F28E12X — C2000™ 실시간 MCU F28E12x LaunchPad™ 개발 키트

LAUNCHXL-F28E12X는 텍사스 인스트루먼트(Texas Instruments) C2000™ 실시간 마이크로컨트롤러(MCU) 시리즈의 F28E12x 디바이스용 저비용 개발 보드입니다. LAUNCHXL-F28E12X는 F28E120SC 실시간 MCU를 기반으로 설계되었으며 제어, 아날로그 및 통신 주변 기기와 통합형 비휘발성 메모리가 특징입니다. LaunchPad™ 개발 키트에는 또한 BoosterPack 확장 커넥터(40핀), 5V 인코더 인터페이스(eQEP) 커넥터, 전력 도메인 절연, 그리고 온보드 XDS110 디버그 (...)
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
평가 보드

TIEVM-MTR-HVINV — 고전압 3상 인버터 모터 제어용 C2000™ MCU 평가 모듈

TIEVM-MTR-HVINV는 고전압 모터 드라이브 애플리케이션을 위한 750W 개발 보드입니다. 이 EVM은 InstaSPIN-FOC FAST 및 eSMO 무센서 옵저버를 사용하여 3상 PMSM(영구 자석 동기 모터)를 위한 센서리스 FOC 제어를 구현합니다. 모듈식 설계를 통해 동일한 마더보드에 대한 다양한 부속 보드 첨부 파일의 플러그 앤 플레이 지원을 사용할 수 있습니다. 이 EVM의 하드웨어 및 펌웨어는 테스트를 거쳐 즉시 사용 가능하므로 개발 시간을 크게 단축하는 데 도움이 되며, 설계 세부 정보와 테스트 결과를 이 (...)

사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
디버그 프로브

TMDSEMU110-U — XDS110 JTAG 디버그 프로브

텍사스 인스트루먼트 XDS110은 TI 임베디드 프로세서를 위한 새로운 디버그 프로브(에뮬레이터)입니다. XDS110은 XDS100 제품군을 대체하면서 하나의 포드로 더 다양한 표준(IEEE1149.1, IEEE1149.7, SWD)을지원합니다. 또한 모든 XDS 디버그 프로브는 ETB(Embedded Trace Buffer)가 포함되어 있는 모든 Arm® 및 DSP 프로세서에서 코어(Core) 및 시스템 트레이스(System Trace)를 지원합니다.  핀을 통한 코어 추적의 경우 XDS560v2 PRO TRACE가 필요합니다.

(...)
사용 설명서: PDF
Download English Version: PDF
TI.com에서 구매할 수 없음
소프트웨어 개발 키트(SDK)

C2000WARE — C2000Ware for C2000 Microcontrollers

C2000Ware is a cohesive set of software and documentation created to minimize development time. It includes device-specific drivers, libraries, and peripheral examples.

  • Hardware design schematics, BOM, gerber files, and documentation for C2000 controlCARDS, Experimenter Kits, and LaunchPads.
  • (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
찾아보기 다운로드 옵션
IDE, 구성, 컴파일러 또는 디버거

SYSCONFIG — Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
시작 다운로드 옵션
온라인 교육

C28X-ACADEMY — C28X-ACADEMY

The C28x Academy is a great resource for developers to learn about C28x-based C2000 real-time microcontrollers. The Academy delivers informational training modules as well as hands-on lab exercises that span a variety of topics.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
찾아보기
시뮬레이션 모델

F28E120Sx BDSL Models

SLLM513.ZIP (5 KB) - BSDL Model
다운로드
시뮬레이션 모델

F28E120Sx IBIS Models

SLLM512.ZIP (1176 KB) - IBIS Model
다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VQFN (RHB) 32 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상