MSPM0C1104
- Core
- Arm 32-bit Cortex-M0+ CPU, frequency up to 24MHz
- Operating characteristics
- Extended temperature: –40°C to 125°C
- Wide supply voltage range: 1.62V to 3.6V
- Memories
- Up to 16KB of flash
- 1KB of SRAM
- High-performance analog peripherals
- One analog-to-digital converter (ADC) with up to 10 total external channels, 1.7Msps at 10 bit or 1.5Msps at 12 bit with VDD as the voltage reference
- Configurable 1.4V or 2.5V internal ADC voltage reference (VREF)
- Integrated temperature sensor
- Integrated supply monitor
- Optimized low-power modes
- RUN: 87µA/MHz
- STOP: 609µA at 4MHz, 311µA at 32kHz
- STANDBY: 5µA with SRAM retention
- SHUTDOWN: 200nA
- Intelligent digital peripherals
- 1-channel DMA controller dedicated for ADC
- Three timers supporting up to 14 PWM channels
- One 16-bit advanced timers with deadband support up to 8 PWM channels
- One 16-bit general purpose timer with 4 capture/compares
- One 16-bit general purpose timer with 2 capture/compares
- Windowed watchdog timer
- BEEPER generating 1kHz, 2kHz, 4kHz, or 8kHz square wave to drive the external beeper
- Enhanced communication interfaces
- One UART interface supporting LIN, IrDA, DALI, smart card, Manchester and low-power operation in STANDBY mode
- One I2C interface supporting FM+ (1Mbps), SMBus, PMBus, and wakeup from STOP mode
- One SPI supporting up to 12Mbps
- Clock system
- Internal 24MHz oscillator with an accuracy from -2% to +1.2% (SYSOSC)
- Internal 32kHz low-frequency oscillator (LFOSC)
- Data integrity
- Cyclic redundancy checker (CRC-16)
- Flexible I/O features
- Up to 18 GPIOs
- Two 5V-tolerant open-drain IOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options
- 20-pin TSSOP (PW)
- 20-pin VSSOP (DGS)
- 20-pin WQFN (RUK)
- 16-pin SOT (DYY)
- 8-pin SOT (DDF)
- 8-pin WSON (DSG)
- 8-pin DSBGA (YCJ)
- Family members (also see Device Comparison)
- MSPS003F4: 16KB of flash, 1KB of RAM
- MSPS003F3: 8KB of flash, 1KB of RAM
- MSPM0C1104: 16KB of flash, 1KB of RAM
- MSPM0C1103: 8KB of flash, 1KB of RAM
- Development kits and software (also see Tools and Software)
- LP-MSPM0C1104 LaunchPad™ development kit
- MSP Software Development Kit (SDK)
MSPM0C110x microcontrollers (MCUs) are part of the MSP highly-integrated ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ core platform operating at up to 24MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages from 1.62V to 3.6V.
The MSPM0C110x devices provide up to 16KB embedded flash program memory with 1KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy from -2% to +1.2%, eliminating the need for an external crystal. Additional features include a 1-channel DMA, CRC-16 accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.5Msps ADC with VDD as the voltage reference, and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as one 16-bit advanced timer, two 16-bit general purpose timer, one windowed watchdog timer, and a variety of communication peripherals including one UART, one SPI, and one I2C. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus.
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration let customers find the MCU that meets their project needs. The architecture combined with extensive low-power modes is optimized to achieve extended battery life in portable measurement applications.
MSPM0C110x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad™ kit available for purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
For complete module descriptions, see the MSPM0 C-Series 24MHz Microcontrollers Technical Reference Manual.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP-MSPM0C1104 — 24MHz Arm® Cortex®-M0+ MCU용 MSPM0C1104 LaunchPad™ 개발 키트
LP-MSPM0C1104 LaunchPad™ 개발 키트는 MSPM0C1104에 기반을 둔 사용이 쉬운 EVM(평가 모듈)입니다. 더 작은 폼 팩터 안에 프로그래밍과 디버깅을 위한 온보드 디버그 프로브를 포함하여 MSPM0C1104 M0+ MCU 플랫폼에서 개발을 시작하는 데 필요한 모든 것이 포함되어 있습니다. 보드에는 버튼 2개와 LED 1개가 포함되어 있습니다.
ALGO-3P-UISP1-TI — 텍사스 인스트루먼트 장치용 Algocraft μISP1 프로그래머
μISP는 호스트 PC(RS-232, USB, LAN 연결 기능이 내장되어 있음)에 연결되어 작동하거나 단독 모드로 작동할 수 있습니다.
독립 실행형 모드의 프로그래밍 싸이클은 단순히 START 버튼을 누르거나 일부 TTL 제어 라인을 통해 실행될 수 있습니다.
컴팩트한 크기와 다양한 기능을 갖추고 있어 생산 환경, 수동 및 자동 프로세스에 간편하게 통합할 수 있습니다.
TMDSEMU200-U — XDS200 USB 디버그 프로브
XDS200은 TI 임베디드 장치를 디버깅하는 데 사용되는 디버그 프로브(에뮬레이터)입니다. 대부분의 장치의 경우 더욱 저렴한 신형 XDS110(www.ti.com/tool/TMDSEMU110-U)을 사용하실 것을 권장합니다. XDS200은 단일 포드에서 다양한 표준(IEEE1149.1, IEEE1149.7, SWD)을 지원합니다. 모든 XDS 디버그 프로브는 ETB(임베디드 트레이스 버퍼)가 포함되어 있는 모든 Arm® 및 DSP 프로세서에서 코어 및 시스템 트레이스를 지원합니다.
XDS200은 TI 20핀 커넥터(TI 14핀, (...)
LB-3P-TRACE32-ARM — Arm® 기반 마이크로컨트롤러 및 프로세서용 Lauterbach TRACE32® 디버그 및 트레이스 시스템
Lauterbach의 TRACE32® 툴은 개발자가 모든 종류의 Arm® 기반 마이크로컨트롤러 및 프로세서를 분석, 최적화 및 인증할 수 있도록 하는 첨단 하드웨어 및 소프트웨어 구성 요소 제품군입니다. 세계적으로 유명한 임베디드 시스템 및 SoC용 디버그 및 트레이스 솔루션은 초기 사전 실리콘 개발부터 현장의 제품 인증 및 문제 해결에 이르기까지 모든 개발 단계를 위한 완벽한 솔루션입니다. Lauterbach 툴의 직관적인 모듈형 설계는 엔지니어에게 현존하는 최고의 성능을 제공하고 요구 사항 변화에 따라 적응하고 성장하는 (...)
SEGGR-3P-J-LINK — 디버그 프로브 SEGGER J-Link 제품군
SEGGER J-Links는 임베디드 시스템 개발을 위한 업계를 선도하는 디버그 프로브 제품 라인입니다. 뛰어난 속도, 신뢰성 및 다목적성으로 알려진 J-Links는 전 세계 개발자가 찾는 툴이 되었습니다. 20년 이상 이 프로브는 다양한 임베디드 애플리케이션 및 산업에서 효율적인 디버깅, 프로그래밍 및 성능 분석을 위한 필수 요소로 자리매김해 왔습니다.
J-Link 디버그 프로브는 디버깅과 플래시 프로그래밍 경험을 위한 최적화하기 위해 선호되는 솔루션입니다. 사용자는 기록적인 플래시 로더, 최대 4MB/s의 RAM 다운로드 (...)
SEGGR-3P-J-TRACE — 스트리밍 트레이스 프로브 SEGGER J-Trace 제품군
SEGGER의 J-Trace는 임베디드 개발자의 디버깅 요구 사항을 충족하고 가능한 최고의 추적 경험을 제공하기 위해 맞춤 설정된 다양한 기능을 지닌 전문 스트리밍 추적 프로브입니다. 무제한 스트리밍 추적, 실시간 코드 프로파일링 및 실시간 코드 커버리지 등의 기능을 갖춘 J-Trace를 사용하면 개발자가 찾기 어려운 코드 결함을 효율적으로 식별 및 격리할 수 있습니다.
Windows, MacOS 및 Linux 플랫폼을 지원하는 J-Trace는 다용도로 사용할 수 있습니다. 대부분의 유명한 IDE와 호환되어 여러 개발 환경에 (...)
TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger
TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)
BTV-3P-FMC — TI M0 홈 피트니스 기기 자체 전원 제어 및 통신 솔루션
BTV-3P-FMC 솔루션은 자체 전원 제어 모듈과 Bluetooth 통신 제어 모듈의 두 가지 기능 모듈을 포함하여 홈 피트니스 기기의 제어 및 통신 기능을 제공합니다.
로잉 머신, 실내 운동용 자전거 등 홈 피트니스 기기를 위해 설계된 이 솔루션은 사용자의 운동으로 발생하는 운동 에너지가 발전기를 구동하여 시스템 전체에 전원을 공급하고, 운동 저항 수준을 제어하며, 운동 지표를 측정하고, 모바일/패드/클라우드와 통신할 수 있습니다.
ACROVIEW-3P-AP6000 — AP6000 programmer support all TI programmable chips, including EP Product, Power ICs, and Gauge ICs
AP6000, launched by Acroview, is a universal programmer designed to support TI ICs across all series. Leveraging Acroview's highly skilled algorithm R&D engineering team, it delivers the fastest chip support speed in the industry.The AP6000 is capable of programming 8 chips simultaneously, and (...)
ACROVIEW-3P-AP8000 — AP8000 Universal Programming System, including all TI programmable chips.
AP8000 is a leading technology platform of Universal Programming developed by Acroview. We have an accomplished team of algorithm R&D engineers, to offer the fastest chip support software development service among the industry. The AP8000 can support the programming of 8 chips simultaneously. (...)
ALGO-3P-WRITENOW — Algocraft WriteNow! 프로그래머
WriteNow! 시스템 내 프로그래머 시리즈는 프로그래밍 산업에서 획기적인 발전입니다. 프로그래머는 다양한 제조업체의 수많은 장치(마이크로컨트롤러, 메모리, CPLD 및 기타 프로그래머블 장치)를 지원하며 간편한 ATE/장치 통합을 위한 컴팩트한 크기를 가지고 있습니다. 이는 단독으로 작동하거나 호스트 PC(RS-232, LAN 및 USB 연결 기능이 내장되어 있음)에 연결되어 있으며 사용이 간편한 소프트웨어 유틸리티가 제공됩니다.
MSPM0-COOLING-FAN-CONTROLLER-DEMO-APPSW — MSPM0 Cooling Fan Controller Demo
지원되는 제품 및 하드웨어
STM8S-TO-MSPS-MIGRATION-TOOL — Simplify migrating your application code from STM8S003 to MSPS003
The STM8S003 to MSPS003 migration tool provides a collection of software, tools, and documentation to simplify the process of migrating applications from the STM8S003 device family to the pin compatible MSPS003 (MSPM0C110x) devices.
지원되는 제품 및 하드웨어
LP-MSPM0C1104-OOBE — Out-of-box experience GUI for LP-MSPM0C1104
지원되는 제품 및 하드웨어
CCSTUDIO-STARTHUB — Example application browser
지원되는 제품 및 하드웨어
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
지원되는 제품 및 하드웨어
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.
(...)
지원되는 제품 및 하드웨어
GHS-3P-MULTI-IDE — Green Hills Software MULTI Integrated Development Environment
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio is a visual design environment that simplifies firmware development, making it possible to configure, develop, and run microcontroller applications in minutes with zero coding and no IDE required. Available as a standalone download or on the cloud.
지원되는 제품 및 하드웨어
SYSCONFIG — Standalone desktop version of SysConfig
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
지원되는 제품 및 하드웨어
GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
지원되는 제품 및 하드웨어
TIDA-010951 — 85~265VAC, 0.92PF 단상 PFC를 지원하는 24V, 35W 무센서 FOC BLDC 레퍼런스 설계
TIDA-010268 — 저압측 MOSFET 제어를 지원하는 5s~7s 배터리 팩 모니터 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YCJ) | 8 | Ultra Librarian |
| SOT-23-THN (DDF) | 8 | Ultra Librarian |
| SOT-23-THN (DYY) | 16 | Ultra Librarian |
| TSSOP (PW) | 20 | Ultra Librarian |
| VSSOP (DGS) | 20 | Ultra Librarian |
| WQFN (RUK) | 20 | Ultra Librarian |
| WSON (DSG) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.