CC3100
- CC3100 SimpleLink Wi-Fi Consists of Wi-Fi
Network Processor and Power-Management
Subsystems - Wi-Fi CERTIFIED™ Chip
- Wi-Fi Network Processor Subsystem
- Featuring Wi-Fi Internet-On-a-Chip™
- Dedicated ARM MCU
Completely Offloads Wi-Fi and Internet
Protocols from the External Microcontroller - Wi-Fi Driver and Multiple Internet Protocols in
ROM - 802.11 b/g/n Radio, Baseband, and Medium
Access Control (MAC), Wi-Fi Driver, and
Supplicant - TCP/IP Stack
- Industry-Standard BSD Socket Application
Programming Interfaces (APIs) - 8 Simultaneous TCP or UDP Sockets
- 2 Simultaneous TLS and SSL Sockets
- Industry-Standard BSD Socket Application
- Powerful Crypto Engine for Fast, Secure Wi-Fi
and Internet Connections with 256-Bit AES
Encryption for TLS and SSL Connections - Station, AP, and Wi-Fi Direct® Modes
- WPA2 Personal and Enterprise Security
- SimpleLink Connection Manager for
Autonomous and Fast Wi-Fi Connections - SmartConfig™ Technology, AP Mode, and
WPS2 for Easy and Flexible Wi-Fi Provisioning - TX Power
- 18.0 dBm @ 1 DSSS
- 14.5 dBm @ 54 OFDM
- RX Sensitivity
- –95.7 dBm @ 1 DSSS
- –74.0 dBm @ 54 OFDM
- Application Throughput
- UDP: 16 Mbps
- TCP: 13 Mbps
- Host Interface
- Interfaces with 8-, 16-, and 32-Bit MCU or
ASICs Over SPI or UART Interface - Low External Host Driver Footprint: Less Than
7KB of Code Memory and 700 B of RAM Memory
Required for TCP Client Application
- Interfaces with 8-, 16-, and 32-Bit MCU or
- Power-Management Subsystem
- Integrated DC-DC Supports a Wide Range of
Supply Voltage:- VBAT Wide-Voltage Mode: 2.1 to 3.6 V
- Preregulated 1.85-V Mode
- Advanced Low-Power Modes
- Hibernate with RTC: 4 µA
- Low-Power Deep Sleep (LPDS): 115 µA
- RX Traffic (MCU Active): 53 mA @
54 OFDM - TX Traffic (MCU Active): 223 mA @
54 OFDM, Maximum Power - Idle Connected: 690 µA @ DTIM = 1
- Integrated DC-DC Supports a Wide Range of
- Clock Source
- 40.0-MHz Crystal with Internal Oscillator
- 32.768-kHz Crystal or External RTC Clock
- Package and Operating Temperature
- 0.5-mm Pitch, 64-Pin, 9-mm × 9-mm QFN
- Ambient Temperature Range: –40°C to 85°C
Connect any low-cost, low-power microcontroller (MCU) to the Internet of Things (IoT). The CC3100 device is the industrys first Wi-Fi CERTIFIED chip used in the wireless networking solution. The CC3100 device is part of the new SimpleLink Wi-Fi family that dramatically simplifies the implementation of Internet connectivity. The CC3100 device integrates all protocols for Wi-Fi and Internet, which greatly minimizes host MCU software requirements. With built-in security protocols, the CC3100 solution provides a robust and simple security experience. Additionally, the CC3100 device is a complete platform solution including various tools and software, sample applications, user and programming guides, reference designs and the TI E2E™ support community. The CC3100 device is available in an easy-to-layout QFN package.
The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a-Chip and contains an additional dedicated ARM MCU that completely offloads the host MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3100 device supports Station, Access Point, and Wi-Fi Direct modes. The device also supports WPA2 personal and enterprise security and WPS 2.0. This subsystem includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols.
The power-management subsystem includes integrated DC-DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiringabout 4 µA of current.
The CC3100 device can connect to any 8, 16, or 32-bit MCU over the SPI or UART Interface. The device driver minimizes the host memory footprint requirements requiring less than 7KB of code memory and 700 B of RAM memory for a TCP client application.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
CC3100BOOST — SimpleLink™ Wi-Fi® CC3100 무선 네트워크 프로세서 BoosterPack™ 플러그인 모듈
특별 참고 사항:
CC3100 장치의 펌웨어를 업데이트하거나, 무선 성능 툴을 사용하거나, 고급 디버깅을 위한 네트워크 처리 로그를 수행하거나, CC3100 MCU 에뮬레이터용 TI SimpleLink™ Studio(PC 기반)를 사용하려면 고급 에뮬레이션 BoosterPack(CC31XXEMUBOOST)도 필요합니다. CC3100BOOST 키트의 펌웨어를 업데이트하려면 CC31XXEMUBOOST 보드를 하나 이상 사용하는 것이 좋습니다. 이러한 키트는 TI 스토어에서 할인된 가격으로 번들로 제공됩니다.
(...)
CC3100MODBOOST — SimpleLink Wi-Fi CC3100 모듈 부스터팩
특별 참고 사항: CC3100 펌웨어를 업데이트하거나, 무선 성능 툴을 사용하거나, 고급 디버깅을 위한 네트워크 처리 로그를 수행하거나, TI의 CC3100 MCU 에뮬레이터용 SimpleLink™ Studio(PC 기반)를 사용하려면 고급 에뮬레이션 BoosterPack(CC31XXEMUBOOST)도 필요합니다. CC3100MODBOOST 키트의 펌웨어를 업데이트하려면 CC31XXEMUBOOST 보드가 하나 이상 있는 것이 좋습니다. 이러한 키트는 TI store에서 할인된 가격에 번들로 제공됩니다.
CC3100 (...)
CC31XXEMUBOOST — SimpleLink™ Wi-Fi® CC31xx BoosterPack™ 플러그인 모듈을 위한 고급 에뮬레이션 키트
This advanced emulation BoosterPack™ plug-in module is an accessory for the SimpleLink™ Wi-Fi® CC31xx wireless network processor BoosterPack plug-in modules
This accessory can be used for:
- Flashing updates to the CC31xxBOOST
- Using the CC3xxx radio tool for RF performance evaluation
- Using (...)
DISCOVERY-ADAPT — SimpleLink Wi-Fi CC31XX 부스터팩 플러그인 모듈용 Discovery 어댑터 보드
소프트웨어를 다운로드하여 Discovery 어댑터에 대한 완전한 경험을 얻고 개발을 (...)
EK-TM4C129EXL — IoT 애플리케이션을 위한 ARM® Cortex®-M4F 기반 MCU TM4C129E 암호화 커넥티드 LaunchPad™
Powered by hardware encryption accelerator-enabled MCUs, the Crypto Connected LaunchPad enables you to develop high performance, data protected, connected IoT applications from secure cloud connection, building/factory automation and smart grid to industrial controls.
The TM4C129E Crypto Connected (...)
CC3100SDK — CC3100 Software Development Kit (SDK), Service Pack, and Add-Ons
The CC3100 SDK contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3100 Internet-on-a-chip™ solution. This SDK can be used with TI’s MSP-EXP430F5529LP LaunchPad, EK-TM4C123GXL LaunchPad, or EK-TM4C1294XL Connected LaunchPad. (...)
SIMPLESTUDIO — CC31xx용 SimpleLink™ Studio
CC31xx용 SimpleLink™ Studio는 임베디드 네트워킹 애플리케이션 및 마이크로컨트롤러용 소프트웨어 개발을 지원하는 데 사용되는 Windows 기반 소프트웨어 툴입니다. 임베디드 소프트웨어 개발자는 CC31xx용 SimpleLink Studio를 사용하여 Visual Studio 또는 Eclipse와 같은 데스크톱 IDE를 사용해 애플리케이션을 개발 및 테스트하고 CC31xx BoosterPack을 사용해 애플리케이션을 클라우드에 연결할 수 있습니다. 그런 다음 애플리케이션을 모든 마이크로컨트롤러로 쉽게 이식할 수 (...)
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 무선 테스팅 툴
SimpleLink™ Wi-Fi® 무선 테스트 툴은 개발 및 인증 중 SimpleLink Wi-Fi CC31xx 및 CC32xx 설계를 RF 평가 및 테스트할 수 있는 Windows 기반 소프트웨어 툴입니다. 이 도구는 라디오를 전송 또는 수신 모드로 수동 설정해 낮은 수준의 라디오를 테스트하는 기능을 지원합니다. 이 툴을 사용하려면 무선 회로 이론 및 무선 테스트 방법에 대한 지식이 필요합니다.
IoT(사물 인터넷)용으로 제작된 SimpleLink Wi-Fi CC31xx 및 CC32xx 장치에는 온칩 Wi-Fi, 인터넷 및 (...)
ENERGIA — Energia
Energia is an open source & community-driven integrated development environment (IDE) & software framework. Based on the Wiring framework, Energia provides an intuitive coding environment as well as a robust framework of easy-to-use functional APIs & libraries for programming a (...)
SIMPLELINK-ACADEMY-CC32XX — SimpleLink™ Academy for CC32xx
WIFISTARTERPRO — SimpleLink™ Wi-Fi® 스타터 프로
iTunes App Store에서 다운로드
Google Play에서 다운로드
SimpleLink™ Wi-Fi® 스타터 프로 모바일 앱은 SimpleLink 프로비저닝을 위한 새로운 모바일 애플리케이션입니다. 장치 측에서 실행되는 임베디드 프로비저닝 라이브러리 및 예제와 함께 제공됩니다. 새로운 프로비저닝 릴리스는 SimpleLink Wi-Fi 제품을 사용한 Wi-Fi 프로비저닝을 위한 TI의 권장 사항입니다. 성공적인 프로세스를 보장하기 위해 피드백 및 폴백 옵션과 함께 고급 AP 모드 프로비저닝을 구현합니다. 고객은 임베디드 (...)
EMBEDDED-PROGRAMMING — SimpleLink™ Wi-Fi® 임베디드 프로그래밍
임베디드 CC3120/CC3220 장치가 탑재된 각 제품에는 직렬 플래시 장치도 연결되어 있어야 합니다. 직렬 플래시는 포맷되어야 하며, 최소한 필요한 소프트웨어 업데이트와 추가 기능이 포함된 서비스 팩으로 프로그래밍되어야 합니다. CC3220의 경우 내부 MCU 프로세서에서 실행되는 이진 이미지도 프로그래밍되어해야 합니다. 직렬 플래시 프로그래밍에는 다음과 같은 몇 가지 기존 옵션이 있습니다:
- Uniflash – 이미지 생성 및 프로그래밍을 제공하는 PC 기반 유틸리티입니다. 콘텐츠는 UART를 통해 프로그래밍됩니다.
- 무선 (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.
UniFlash는 CCStudio™ 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.
macOS는 mmWave, AMx, K2G 및 (...)
SIMPLELINK-CC3XXX-CERTIFICATION — SimpleLink™ CC3XXX에 대한 무선 인증
CC3XXX 인증 지원을 찾고 계십니까? SIMPLELINK-CC3XXX-CERTIFCATION은 CC31XX, CC32XX 및 CC33XX 제품의 성공적인 인증을 위한 관련 정보와 지원을 제공합니다. 이 페이지에서는 칩 다운 솔루션을 사용한 설계를 위한 TI의 모듈에 대한 최신 인증 보고서와 평가 보드를 확인할 수 있습니다.
3P-WIRELESS-MODULES — 타사 무선 모듈 검색 툴
타사 무선 모듈 검색 툴은 개발자가 완제품 사양을 충족하는 제품을 식별하고 생산 준비가 완료된 무선 모듈을 조달하는 데 유용합니다. 검색 툴에 포함되어 있는 타사 모듈 공급업체는 TI 무선 연결 제품을 사용하여 무선 모듈을 설계 및 제조하는 전문성을 갖춘 독립 회사입니다.
SWRR177 — CC3x00 Design Checklist
많은 TI 레퍼런스 설계에는 CC3100이(가) 포함됩니다.
레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGC) | 64 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.