CC1311P3
Wireless microcontroller
- Powerful 48MHz Arm Cortex-M4 processor
- 352KB flash program memory
- 32KB of ultra-low leakage SRAM
- 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
- Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY and MAC
- Supports over-the-air upgrade (OTA)
Low power consumption
- MCU consumption:
- 2.63mA active mode, CoreMark
- 55µA/MHz running CoreMark
- 0.7µA standby mode, RTC, 32KB RAM
- 0.1µA shutdown mode, wake-up on pin
- Radio Consumption:
- 5.4mA RX at 868MHz
- 24.9mA TX at +14dBm at 868MHz
- 65mA TX at +20dBm at 915MHz
Wireless protocol support
High-performance radio
- -121dBm for 2.5kbps long-range mode
- -120dBm at 4.8kbps narrowband mode, 433MHz
- -118dBm at 9.6kbps narrowband mode, 868MHz
- -110dBm at 50kbps, 802.15.4, 868MHz
- Output power up to +20dBm with temperature compensation
- Down to 4kHz receiver filter bandwidth
Regulatory compliance
- Designed for systems targeting compliance with these standards:
- ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 303 131, EN 303 204
- FCC CFR47 Part 15
- ARIB STD-T108
MCU peripherals
- Digital peripherals can be routed to any GPIO
- Four 32-bit or eight 16-bit general-purpose timers
- 12-bit ADC, 200 kSamples/s, 8 channels
- 8-bit DAC
- Analog Comparator
- UART, SSI, I2C, I2S
- Real-time clock (RTC)
- Integrated temperature and battery monitor
Security enablers
- AES 128-bit cryptographic accelerator
- True random number generator (TRNG)
- Additional cryptography drivers available in Software Development Kit (SDK)
Development tools and software
- LP-CC1311P3 Development Kit
- SimpleLink™ CC13xx and CC26xx Software Development Kit (SDK)
- SmartRF™ Studio for simple radio configuration
- SysConfig system configuration tool
Operating range
- On-chip buck DC/DC converter
- 1.8V to 3.8V single supply voltage
- -40 to +105°C
Package
- 7mm × 7mm RGZ VQFN48 (26 GPIOs)
- RoHS-compliant package
The SimpleLink™CC1311P3 device is a multiprotocol Sub-1GHz wireless microcontroller (MCU) supporting IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty, proprietary systems, including the TI 15.4-Stack (Sub-1GHz). The CC1311P3 is based on an Arm® Cortex® M4 main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics, and medical applications.
The CC1311P3 has a software-defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in 143MHz to 176MHz, 287MHz to 351MHz, 359MHz to 527-MHz, 861MHz to 1054MHz, and 1076MHz to 1315MHz frequency bands. The CC1311P3 has an efficient built-in PA that supports +14dBm TX at 24.9mA and +20dBm TX at 65mA. In RX, it has -121dBm sensitivity and 88dB blocking ±10MHz in SimpleLink™ long-range mode with 2.5kbps data rate.
The CC1311P3 has a low sleep current of 0.7µA with RTC and 32KB RAM retention.
Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.
The CC1311P3 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty, Sub-1GHz MCUs, and host MCUs. CC1311P3 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool support migration between devices in the portfolio. A comprehensive number of software stacks, application examples, and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP-CC1311P3 — SimpleLink™ Sub-1GHz 무선 MCU용 CC1311P3 LaunchPad™ 개발 키트
이 LaunchPad™ 개발 키트는 TI 15.4 스택 및 독점 RF 프로토콜을 지원하는 SimpleLink™ Sub-1GHz 무선 MCU로 개발 속도를 높이는 데 사용됩니다. CC13XX-CC26XX 소프트웨어 개발 키트(SDK)에서 소프트웨어 지원을 제공합니다.
KNGRY-3P-MICROPHONE — CC1311 및 CC1312용 Guangzhou Kingray Information Technology 무선 디지털 마이크
WA12XX 시리즈는 UHF 고성능 디지털 무선 마이크 시스템으로, 무선 마이크, 레이저 포인터, PPT 페이지 플립 및 기타 기능이 통합되어 있습니다. 이 기능을 사용하면 사용 환경에서 깨끗한 채널을 자동으로 검색하여 채널을 빠르게 잠그고 간섭을 제거할 수 있습니다. 또한 적외선 주파수 페어링 모드가 탑재되어 열악한 사용 환경에서도 견딜 수 있습니다. 이 시리즈 제품은 UHF 주파수 대역에서 작동하므로 WiFi/2.4G/700MHz/5.8G의 간섭을 완벽하게 방지할 수 있습니다.
BDE-3P-SUB1GHZ — BDE Sub-1GHz 모듈
BDE Technology, Inc.는 TI 인증을 받은 타사 모듈 공급자입니다. TI의 CC1XXX Sub-1GHz 무선 커넥티비티 제품에 기반을 둔 BDE 모듈을 사용하면 고객은 개발 주기 단축, 설계 불확실성 감소, 제품 비용을 낮추고, 경쟁력 있는 제품을 효율적으로 출시할 수 있습니다. BDE는 Amazon Sidewalk, Wi-SUN, mioty 및 무선 M-Bus와 같은 초저전력 무선 통신 기술을 전 세계의 OEM, 시스템 통합업체, 장치 제조업체 및 솔루션 제공업체에 제공하는 전문 기술을 제공합니다.
LB-3P-TRACE32-WIRELESS — 무선 연결용 Lauterbach TRACE32® 디버그 시스템
Lauterbach의 TRACE32® 툴은 개발자가 다양한 종류의 TI 무선 연결 칩을 분석, 최적화 및 인증할 수 있도록 하는 첨단 하드웨어 및 소프트웨어 구성 요소 제품군입니다. 세계적으로 유명한 임베디드 시스템용 디버그 솔루션은 초기 사전 실리콘 개발부터 현장의 제품 인증 및 문제 해결에 이르기까지 다음을 포함하는 모든 개발 단계를 위한 완벽한 솔루션입니다. 전체 온칩 중단점 지원, 런타임 메모리 액세스, 플래시 프로그래밍 및 벤치마크 카운터. 모든 것이 스크립팅이 가능하므로 개발자는 동일한 테스트 시퀀스를 계속해서 (...)
SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices
SimpleLink™ 저전력 SDK는 CC13xx, CC23xx, CC26xx 및 CC27xx 제품군을 지원합니다. 이러한 SDK는 SimpleLink CC13xx, CC23xx, CC26xx 및 CC27xx 무선 MCU에서 Bluetooth® 저에너지, Mesh, Zigbee®, Matter, Thread, 802.15.4 기반, 독점 및 멀티프로토콜 솔루션을 지원하는 등 Sub-1GHz 및 2.4GHz 애플리케이션 개발을 위한 포괄적인 소프트웨어 패키지를 제공합니다.
TI-15-4-STACK-GATEWAY-LINUX-SDK — TI 15-4-Stack Gateway Linux Software Development Kit
The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)
ARM-CGT — Arm® 코드 생성 툴 – 컴파일러
The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.
The current tools ARM-CGT-CLANG are derived from the (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
UNIFLASH — UniFlash 플래시 프로그래밍 도구
UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.
UniFlash는 CCStudio™ 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.
macOS는 mmWave, AMx, K2G 및 (...)
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio는 RF 시스템 설계자가 모든 TI CC1xxx 및 CC2xxx 저전력 RF 장치 설계 공정의 초기 단계에 무선 기능을 손쉽게 평가할 수 있도록 지원하는 Windows 애플리케이션입니다. 구성 레지스터 값 및 명령의 생성과 RF 시스템의 실무 테스트 및 디버깅을 간소화합니다.
SmartRF Studio는 다음과 같은 TI 장치를 지원합니다.
리소스
SUB1GHZ-HW-DESIGN-REVIEW — Hardware design reviews for SimpleLink™ CC1xxx devices
SimpleLink™ 1GHz 미만 하드웨어 설계 검토 프로세스 시작하기:
- 1단계: 검토를 요청하기 전에 기술 문서 및 설계, 해당 제품 페이지에서 사용 가능한 개발 리소스를 검토하는 것이 중요합니다(아래 CC1xxx 제품 페이지 링크 참조).
- 2단계: 하드웨어 설계 검토 요청 양식을 다운로드해 작성합니다
- 3단계: 작성한 하드웨어 설계 검토 요청 양식과 필요한 문서를 함께 connectivity-sub1ghz-hw-review@list.ti.com으로 이메일로 보냅니다
SimpleLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.