CC3100MOD
- The CC3100MOD is a Wi-Fi module consisting of the CC3100R11MRGC Wi-Fi network processor and power management subsystems. This fully integrated module includes all required clocks, serial peripheral interface (SPI) flash, and passives.
- Modular FCC, IC, TELEC, and CE certifications save customer effort, time, and money
- Wi-Fi CERTIFIED™ modules, with ability to request certificate transfer for Wi-Fi Alliance members
- Wi-Fi network processor subsystem
- Featuring Wi-Fi Internet-on-a chip™ circuits
- Dedicated Arm
microcontroller (MCU)
Completely offloads Wi-Fi and Internet protocols from the external MCU
- Wi-Fi driver and multiple Internet protocols in ROM
- 802.11 b/g/n radio, baseband, and medium access control (MAC), Wi-Fi driver, and supplicant
- TCP/IP stack
- Industry-standard BSD socket application programming interfaces (APIs)
- 8 simultaneous TCP or UDP sockets
- 2 of the 8 sockets can be TLS and SSL sockets
- Powerful crypto engine for fast, secure Wi-Fi and Internet connections with 256-bit AES encryption for TLS and SSL connections
- Station, AP, and Wi-Fi Direct modes
- WPA2 Personal and Enterprise Security
- SimpleLink™ connection manager for autonomous and fast Wi-Fi connections
- SmartConfig™ technology, AP mode, and WPS2 for easy and flexible Wi-Fi provisioning
- TX power
- 17 dBm at 1 DSSS
- 17.25 dBm at 11 CCK
- 13.5 dBm at 54 OFDM
- RX sensitivity
- –94.7 dBm at 1 DSSS
- –87 dBm at 11 CCK
- –73 dBm at 54 OFDM
- Application throughput
- UDP: 16 Mbps
- TCP: 13 Mbps
- Host interface
- Wide range of power supply (2.3 to 3.6 V)
- Interfaces with 8-, 16-, and 32-bit MCU or ASICs over a SPI or UART interface
- Low footprint host driver: less than 6KB
- Supports RTOS and no-OS applications
- Power-management subsystem
- Integrated DC-DC
converter suports a wide range of
supply voltage:
- Direct battery mode: 2.3 V to 3.6 V
- Low power consumption at
3.6 V
- Hibernate with real-time clock (RTC): 7 µA
- Standby: 140 µA
- RX traffic: 54 mA at 54 OFDM
- TX traffic: 223 mA at 54 OFDM
- Integrated DC-DC
converter suports a wide range of
supply voltage:
- Integrated components on module
- 40.0-MHz crystal with internal oscillator
- 32.768-kHz crystal (RTC)
- 8-Mbit SPI serial flash
- RF filter and passive components
- 1.27-mm pitch, 63-pin, 20.5-mm × 17.5-mm LGA package for easy assembly and low-cost PCB design
- Operating temperature range: –20°C to +70°C
- Module supports SimpleLink Developers Ecosystem
Add Wi-Fi® to low-cost, low-power MCU for IoT applications. The CC3100MOD is an FCC, IC, CE, and Wi-Fi CERTIFIED™ module that is part of the SimpleLink™ Wi-Fi family, which dramatically simplifies the implementation of Internet connectivity. The CC3100MOD integrates all protocols for Wi-Fi and Internet, which greatly minimize host MCU software requirements. With built-in security protocols, the CC3100MOD solution provides a robust and simple security experience. Additionally, the CC3100MOD is a complete platform solution including various tools and software, sample applications, user and programming guides, reference designs, and the TI E2E™ support community. The CC3100MOD is available in an LGA package that is easy to lay out with all required components including serial Flash, RF filter, crystal, and passive components that are fully integrated.
The Wi-Fi network processor subsystem features Wi-Fi Internet-on-a chip™ circuitry and contains an additional dedicated Arm MCU that off-loads the host MCU. This subsystem includes an 802.11b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3100MOD module supports station, access point, and Wi-Fi direct modes. The module supports WPA2 personal and enterprise security and also WPS 2.0. This subsystem includes embedded TCP/IP, TLS/SSL stacks, an HTTP server, and multiple Internet protocols.
The power-management subsystem includes an integrated DC-DC converter with support for a wide range of supply voltages. This subsystem enables low-power consumption modes such as hibernate with RTC , which requires approximately 7 µA. The CC3100MOD module can connect to any 8-, 16-, or 32-bit MCU over the SPI or UART Interface. The device driver minimizes the host memory footprint requirements of less than 7KB of code memory and 700B of RAM for a TCP client application.
관심 가지실만한 유사 제품
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
CC3100BOOST — SimpleLink™ Wi-Fi® CC3100 무선 네트워크 프로세서 BoosterPack™ 플러그인 모듈
특별 참고 사항:
CC3100 장치의 펌웨어를 업데이트하거나, 무선 성능 툴을 사용하거나, 고급 디버깅을 위한 네트워크 처리 로그를 수행하거나, CC3100 MCU 에뮬레이터용 TI SimpleLink™ Studio(PC 기반)를 사용하려면 고급 에뮬레이션 BoosterPack(CC31XXEMUBOOST)도 필요합니다. CC3100BOOST 키트의 펌웨어를 업데이트하려면 CC31XXEMUBOOST 보드를 하나 이상 사용하는 것이 좋습니다. 이러한 키트는 TI 스토어에서 할인된 가격으로 번들로 제공됩니다.
(...)
CC3100MODBOOST — SimpleLink Wi-Fi CC3100 모듈 부스터팩
특별 참고 사항: CC3100 펌웨어를 업데이트하거나, 무선 성능 툴을 사용하거나, 고급 디버깅을 위한 네트워크 처리 로그를 수행하거나, TI의 CC3100 MCU 에뮬레이터용 SimpleLink™ Studio(PC 기반)를 사용하려면 고급 에뮬레이션 BoosterPack(CC31XXEMUBOOST)도 필요합니다. CC3100MODBOOST 키트의 펌웨어를 업데이트하려면 CC31XXEMUBOOST 보드가 하나 이상 있는 것이 좋습니다. 이러한 키트는 TI store에서 할인된 가격에 번들로 제공됩니다.
CC3100 (...)
CC31XXEMUBOOST — SimpleLink™ Wi-Fi® CC31xx BoosterPack™ 플러그인 모듈을 위한 고급 에뮬레이션 키트
This advanced emulation BoosterPack™ plug-in module is an accessory for the SimpleLink™ Wi-Fi® CC31xx wireless network processor BoosterPack plug-in modules
This accessory can be used for:
- Flashing updates to the CC31xxBOOST
- Using the CC3xxx radio tool for RF performance evaluation
- Using (...)
EK-TM4C129EXL — IoT 애플리케이션을 위한 ARM® Cortex®-M4F 기반 MCU TM4C129E 암호화 커넥티드 LaunchPad™
Powered by hardware encryption accelerator-enabled MCUs, the Crypto Connected LaunchPad enables you to develop high performance, data protected, connected IoT applications from secure cloud connection, building/factory automation and smart grid to industrial controls.
The TM4C129E Crypto Connected (...)
MSP-EXP430FR5969 — MSP430FR5969 LaunchPad™ 개발 키트
MSP-EXP430FR5969 LaunchPad 개발 키트는 MSP430FR5969 MCU를 위한 사용하기 쉬운 마이크로컨트롤러 개발 보드입니다. 프로그래밍, 디버깅 및 에너지 측정을 위한 온보드 디버그 에뮬레이션을 포함하여 MSP430FRxx FRAM 플랫폼에서 빠르게 개발을 시작하는 데 필요한 모든 것이 포함되어 있습니다. 이 보드에는 단순한 사용자 인터페이스를 통합할 수 있는 온보드 버튼 및 LED와 외부 전원 공급 장치 없이 독립형 애플리케이션을 지원하는 슈퍼캡이 있습니다. MSP430FR5969 마이크로컨트롤러는 (...)
CC3100SDK — CC3100 Software Development Kit (SDK), Service Pack, and Add-Ons
The CC3100 SDK contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3100 Internet-on-a-chip™ solution. This SDK can be used with TI’s MSP-EXP430F5529LP LaunchPad, EK-TM4C123GXL LaunchPad, or EK-TM4C1294XL Connected LaunchPad. (...)
SIMPLESTUDIO — CC31xx용 SimpleLink™ Studio
CC31xx용 SimpleLink™ Studio는 임베디드 네트워킹 애플리케이션 및 마이크로컨트롤러용 소프트웨어 개발을 지원하는 데 사용되는 Windows 기반 소프트웨어 툴입니다. 임베디드 소프트웨어 개발자는 CC31xx용 SimpleLink Studio를 사용하여 Visual Studio 또는 Eclipse와 같은 데스크톱 IDE를 사용해 애플리케이션을 개발 및 테스트하고 CC31xx BoosterPack을 사용해 애플리케이션을 클라우드에 연결할 수 있습니다. 그런 다음 애플리케이션을 모든 마이크로컨트롤러로 쉽게 이식할 수 (...)
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 무선 테스팅 툴
SimpleLink™ Wi-Fi® 무선 테스트 툴은 개발 및 인증 중 SimpleLink Wi-Fi CC31xx 및 CC32xx 설계를 RF 평가 및 테스트할 수 있는 Windows 기반 소프트웨어 툴입니다. 이 도구는 라디오를 전송 또는 수신 모드로 수동 설정해 낮은 수준의 라디오를 테스트하는 기능을 지원합니다. 이 툴을 사용하려면 무선 회로 이론 및 무선 테스트 방법에 대한 지식이 필요합니다.
IoT(사물 인터넷)용으로 제작된 SimpleLink Wi-Fi CC31xx 및 CC32xx 장치에는 온칩 Wi-Fi, 인터넷 및 (...)
SIMPLELINK-ACADEMY-CC32XX — SimpleLink™ Academy for CC32xx
EMBEDDED-PROGRAMMING — SimpleLink™ Wi-Fi® 임베디드 프로그래밍
임베디드 CC3120/CC3220 장치가 탑재된 각 제품에는 직렬 플래시 장치도 연결되어 있어야 합니다. 직렬 플래시는 포맷되어야 하며, 최소한 필요한 소프트웨어 업데이트와 추가 기능이 포함된 서비스 팩으로 프로그래밍되어야 합니다. CC3220의 경우 내부 MCU 프로세서에서 실행되는 이진 이미지도 프로그래밍되어해야 합니다. 직렬 플래시 프로그래밍에는 다음과 같은 몇 가지 기존 옵션이 있습니다:
- Uniflash – 이미지 생성 및 프로그래밍을 제공하는 PC 기반 유틸리티입니다. 콘텐츠는 UART를 통해 프로그래밍됩니다.
- 무선 (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.
UniFlash는 CCStudio™ 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.
macOS는 mmWave, AMx, K2G 및 (...)
SIMPLELINK-CC31XX-REPORTS — Reports: CC31xx Regulatory Certification
CC3XXX 인증 지원을 찾고 계십니까? SIMPLELINK-CC3XXX-CERTIFCATION은 CC31XX, CC32XX 및 CC33XX 제품의 성공적인 인증을 위한 관련 정보와 지원을 제공합니다. 이 페이지에서는 칩 다운 솔루션을 사용한 설계를 위한 TI의 모듈에 대한 최신 인증 보고서와 평가 보드를 확인할 수 있습니다.
SWRR177 — CC3x00 Design Checklist
TIDA-00375 — 24VAC 전원을 지원하는 UART-Wi-Fi 브리지 레퍼런스 디자인
This reference design uses our SimpleLink Wi-Fi CC3200 internet-on-a-chip wireless MCU module to create a data bridge between existing hardware with a logic-level UART interface and a Wi-Fi network. The design also contains a simple switcher power supply with a wide-input range suitable (...)
TIDA-00380 — CAN-Wi-Fi 게이트웨이 레퍼런스 디자인
TIDA-00380 CAN to Wi-Fi gateway reference design shows how to add Wi-Fi connectivity to a CAN network. The design provides a simple way for you to gain access to the CAN bus traffic via a web page. This connection can be used for diagnostics or to add the capability to control the CAN bus. (...)
TIDA-00485 — 24VAC 전원을 지원하는 비절연 RS-485-와이파이 브리지 레퍼런스 디자인
TIDA-00485 uses our SimpleLink Wi-Fi CC3200 Internet-on-a-chip wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi® network. The SN65HVD72 transceiver provides the RS-485 interface with 12 kV of ESD protection and additional protection is provided on board. (...)
TIDA-00486 — 24VAC 전원을 지원하는 절연 RS-485-WiFi 브리지 레퍼런스 디자인
TIDA-00486 uses our SimpleLink Wi-Fi® CC3200 Internet-on-a-chip wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi network. The ISO15 transceiver provides an isolated RS-485 interface with up to 2500 VRMS of isolation. The LM5160 Fly-Buck™ power supply (...)
TIDC-3PHMTR-WIFIXR — 스마트 전기 계량기에서 SimpleLink Wi-Fi 커넥티비티 구현
이 설계는 Wi-Fi 연결을 지원하는 3상 에너지 계량기를 구현합니다. 전자 계량기 SoC는 모든 계측 기능을 수행하고 SimpleLink™ Wi-Fi 트랜시버를 제어하기 위해 사용됩니다. 스마트 계량기 데이터는 표준 웹 브라우저를 통해 Wi-Fi로 연결된 장치에서 표시할 수 있습니다.
TIDC-CC3ANTENNA-SELECTION — SimpleLink Wi-Fi 안테나 선택
The SimpleLink™ Wi-Fi® Antenna BoosterPack (CC3ANTENNABOOST) enables evaluation and development of end applications requiring antenna diversity. When used with the SimpleLink Wi-Fi CC3200 Launchpad (CC3200-LAUNCHXL) or the CC3100 Boosterpack (CC3100BOOST) rev 3.1 or higher, the user can select the (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| QFM (MOB) | 63 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.