MSP430FR5969-SP

활성

방사능 저항 혼합 신호 마이크로컨트롤러

제품 상세 정보

CPU MSP430 Frequency (MHz) 16 Flash memory (kByte) 64 RAM (kByte) 2 ADC type 12-bit SAR Features AES, DMA, Real-time clock UART 2 Number of ADC channels 16 SPI 3 USB No Hardware accelerators 0 Operating temperature range (°C) -55 to 105 Rating Space Communication interface I2C, SPI, UART Operating system BareMetal (No OS), TI RTOS Nonvolatile memory (kByte) 64 Number of GPIOs 40 Number of I2Cs 1 Security Cryptographic acceleration, Secure communication, Secure debug, Software IP protection
CPU MSP430 Frequency (MHz) 16 Flash memory (kByte) 64 RAM (kByte) 2 ADC type 12-bit SAR Features AES, DMA, Real-time clock UART 2 Number of ADC channels 16 SPI 3 USB No Hardware accelerators 0 Operating temperature range (°C) -55 to 105 Rating Space Communication interface I2C, SPI, UART Operating system BareMetal (No OS), TI RTOS Nonvolatile memory (kByte) 64 Number of GPIOs 40 Number of I2Cs 1 Security Cryptographic acceleration, Secure communication, Secure debug, Software IP protection
HTQFP (PHP) 48 81 mm² 9 x 9 VQFN (RGZ) 48 49 mm² 7 x 7
  • Radiation-Hardness Assured
    • Extended Temperature Operation (–55°C to 105°C) (1)
    • Single Event Latchup (SEL) Immune to 72 MeV.cm2/mg at 125°C
    • Radiation Lot Acceptance Tested to 50 krad
    • 48-pin VQFN Plastic Package
    • Single Controlled Baseline
    • Extended Product Change Notification
    • Product Traceability
    • Extended Product Life Cycle
  • Embedded Microcontroller
    • 16-Bit RISC Architecture up to 16‑MHz Clock
    • Wide Supply Voltage Range
      (1.8 V to 3.6 V) (2)
  • Optimized Ultra-Low-Power Modes
    • Active Mode: Approximately 100 µA/MHz
    • Standby (LPM3 With VLO): 0.4 µA (Typical)
    • Real-Time Clock (LPM3.5): 0.25 µA (Typical) (3)
    • Shutdown (LPM4.5): 0.02 µA (Typical)
  • Ultra-Low-Power Ferroelectric RAM (FRAM)
    • Up to 64KB of Nonvolatile Memory
    • Ultra-Low-Power Writes
    • Fast Write at 125 ns Per Word (64KB in 4 ms)
    • Unified Memory = Program + Data + Storage in One Single Space
    • 1015 Write Cycle Endurance
    • Radiation Resistant and Nonmagnetic
  • Intelligent Digital Peripherals
    • 32-Bit Hardware Multiplier (MPY)
    • 3-Channel Internal DMA
    • Real-Time Clock (RTC) With Calendar and Alarm Functions
    • Five 16-Bit Timers With up to Seven Capture/Compare Registers Each
    • 16-Bit Cyclic Redundancy Checker (CRC)
  • High-Performance Analog
    • 16-Channel Analog Comparator
    • 12-Bit Analog-to-Digital Converter (ADC)
      With Internal Reference and Sample-and-Hold
      and up to 16 External Input Channels
    • Multifunction Input/Output Ports
      • Accessible Bit-, Byte-, and Word-Wise (in Pairs)
      • Edge-Selectable Wake From LPM on All Ports
      • Programmable Pullup and Pulldown on All Ports
    • Code Security and Encryption
      • 128-Bit or 256-Bit AES Security Encryption and Decryption Coprocessor
      • Random Number Seed for Random Number Generation Algorithms
    • Enhanced Serial Communication
      • eUSCI_A0 and eUSCI_A1 Support
        • UART With Automatic Baud-Rate Detection
        • IrDA Encode and Decode
        • SPI
      • eUSCI_B0 Supports
        • I2C With Multiple Slave Addressing
        • SPI
      • Hardware UART
    • Flexible Clock System
      • Fixed-Frequency DCO With 10 Selectable Factory-Trimmed Frequencies
      • Low-Power Low-Frequency Internal Clock Source (VLO)
      • 32-kHz Crystals (LFXT)
      • High-Frequency Crystals (HFXT)
    • Development Tools and Software
      • Free Professional Development Environments With EnergyTrace++™ Technology
      • Development Kit (MSP-TS430RGZ48C)
    • For Complete Module Descriptions, See the MSP430FR58xx, MSP430FR59xx, MSP430FR68xx, and MSP430FR69xx Family User’s Guide

    (1) Refer to MSP430FR5969-SP EM Lifetime Derating Chart in the Specifications Section.

    (2)Minimum supply voltage is restricted by SVS levels.

    (3)RTC is clocked by a 3.7-pF crystal.

    • Radiation-Hardness Assured
      • Extended Temperature Operation (–55°C to 105°C) (1)
      • Single Event Latchup (SEL) Immune to 72 MeV.cm2/mg at 125°C
      • Radiation Lot Acceptance Tested to 50 krad
      • 48-pin VQFN Plastic Package
      • Single Controlled Baseline
      • Extended Product Change Notification
      • Product Traceability
      • Extended Product Life Cycle
    • Embedded Microcontroller
      • 16-Bit RISC Architecture up to 16‑MHz Clock
      • Wide Supply Voltage Range
        (1.8 V to 3.6 V) (2)
    • Optimized Ultra-Low-Power Modes
      • Active Mode: Approximately 100 µA/MHz
      • Standby (LPM3 With VLO): 0.4 µA (Typical)
      • Real-Time Clock (LPM3.5): 0.25 µA (Typical) (3)
      • Shutdown (LPM4.5): 0.02 µA (Typical)
    • Ultra-Low-Power Ferroelectric RAM (FRAM)
      • Up to 64KB of Nonvolatile Memory
      • Ultra-Low-Power Writes
      • Fast Write at 125 ns Per Word (64KB in 4 ms)
      • Unified Memory = Program + Data + Storage in One Single Space
      • 1015 Write Cycle Endurance
      • Radiation Resistant and Nonmagnetic
    • Intelligent Digital Peripherals
      • 32-Bit Hardware Multiplier (MPY)
      • 3-Channel Internal DMA
      • Real-Time Clock (RTC) With Calendar and Alarm Functions
      • Five 16-Bit Timers With up to Seven Capture/Compare Registers Each
      • 16-Bit Cyclic Redundancy Checker (CRC)
    • High-Performance Analog
      • 16-Channel Analog Comparator
      • 12-Bit Analog-to-Digital Converter (ADC)
        With Internal Reference and Sample-and-Hold
        and up to 16 External Input Channels
      • Multifunction Input/Output Ports
        • Accessible Bit-, Byte-, and Word-Wise (in Pairs)
        • Edge-Selectable Wake From LPM on All Ports
        • Programmable Pullup and Pulldown on All Ports
      • Code Security and Encryption
        • 128-Bit or 256-Bit AES Security Encryption and Decryption Coprocessor
        • Random Number Seed for Random Number Generation Algorithms
      • Enhanced Serial Communication
        • eUSCI_A0 and eUSCI_A1 Support
          • UART With Automatic Baud-Rate Detection
          • IrDA Encode and Decode
          • SPI
        • eUSCI_B0 Supports
          • I2C With Multiple Slave Addressing
          • SPI
        • Hardware UART
      • Flexible Clock System
        • Fixed-Frequency DCO With 10 Selectable Factory-Trimmed Frequencies
        • Low-Power Low-Frequency Internal Clock Source (VLO)
        • 32-kHz Crystals (LFXT)
        • High-Frequency Crystals (HFXT)
      • Development Tools and Software
        • Free Professional Development Environments With EnergyTrace++™ Technology
        • Development Kit (MSP-TS430RGZ48C)
      • For Complete Module Descriptions, See the MSP430FR58xx, MSP430FR59xx, MSP430FR68xx, and MSP430FR69xx Family User’s Guide

      (1) Refer to MSP430FR5969-SP EM Lifetime Derating Chart in the Specifications Section.

      (2)Minimum supply voltage is restricted by SVS levels.

      (3)RTC is clocked by a 3.7-pF crystal.

      The MSP430™ ultra-low-power (ULP) FRAM platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, allowing innovators to increase performance at lowered energy budgets. FRAM technology combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash at much lower power.

      The ultra low-power architecture of the MSP430FR5969-SP showcases seven low-power modes, optimized to achieve power efficient distributed telemetry/housekeeping systems.

      The integrated mixed-signal features of the MSP430FR5969-SP make it ideally suited for distributed telemetry applications in next-generation spacecraft. The strong immunity to single-event latchup and total ionizing dose, enable the device to be used in a variety of space and radiation environments.

      The MSP430™ ultra-low-power (ULP) FRAM platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, allowing innovators to increase performance at lowered energy budgets. FRAM technology combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash at much lower power.

      The ultra low-power architecture of the MSP430FR5969-SP showcases seven low-power modes, optimized to achieve power efficient distributed telemetry/housekeeping systems.

      The integrated mixed-signal features of the MSP430FR5969-SP make it ideally suited for distributed telemetry applications in next-generation spacecraft. The strong immunity to single-event latchup and total ionizing dose, enable the device to be used in a variety of space and radiation environments.

      다운로드 스크립트와 함께 비디오 보기 비디오

      기술 자료

      star =TI에서 선정한 이 제품의 인기 문서
      검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
      28개 모두 보기
      상위 문서 유형 직함 형식 옵션 날짜
      * Data sheet MSP430FR5969-SP Radiation Hardened Mixed-Signal Microcontroller datasheet (Rev. A) PDF | HTML 2018/03/26
      * Errata MSP430FR5969 Microcontroller Errata (Rev. AG) PDF | HTML 2021/10/21
      * User guide MSP430FR58xx, MSP430FR59xx, and MSP430FR6xx Family User's Guide (Rev. P) PDF | HTML 2020/04/21
      * Radiation & reliability report MSP430FR5969-SP Neutron Displacement Damage Characterization Radiation Report 2019/04/04
      * Radiation & reliability report Single-event Effects Test Report of the MSP430FR5969-SP PDF | HTML 2019/03/19
      * Radiation & reliability report MSP430FR5969-SP Radiation-Hardened Mixed-Signal Microcontroller TID Rad Report 2018/04/06
      Design guide Radiation-Hardened Space Battery Management System (BMS) Reference Design 2025/07/30
      Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 2025/06/17
      Application note Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) PDF | HTML 2025/06/10
      Selection guide TI Space Products (Rev. K) 2025/04/04
      More literature TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 2025/02/20
      Application note Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 2022/10/19
      User guide MSP430 FRAM Devices Bootloader (BSL) User's Guide (Rev. AB) PDF | HTML 2022/09/22
      Application note ESD Diode Current Specification (Rev. B) PDF | HTML 2021/08/23
      Application note MSP430 FRAM Technology – How To and Best Practices (Rev. B) 2021/08/12
      Application note MSP430 System-Level ESD Considerations (Rev. B) PDF | HTML 2021/07/14
      User guide MSP430 MCUs Development Guide Book (Rev. A) PDF | HTML 2021/05/13
      Technical article Satellite state of health: how space-grade ICs are improving telemetry circuit des PDF | HTML 2021/01/26
      Application note MSP430FRBoot – Main Memory Bootloader and Over-the-Air Updates for MSP430 FRAM (Rev. E) PDF | HTML 2020/07/08
      Application note MSP430 System ESD Troubleshooting Guide PDF | HTML 2019/12/13
      E-book Radiation Handbook for Electronics (Rev. A) 2019/05/21
      Application note Software I2C on MSP430 MCUs (Rev. A) 2018/07/02
      Application note Random Number Generation Using MSP430FR59xx and MSP430FR69xx Microcontrollers 2017/01/18
      Application note General Oversampling of MSP ADCs for Higher Resolution (Rev. A) PDF | HTML 2016/04/01
      Application note Designing With the MSP430FR58xx, FR59xx, FR68xx, and FR69xx ADC (Rev. A) 2016/03/30
      Application note MSP Code Protection Features PDF | HTML 2015/12/07
      User guide Crypto-Bootloader (CryptoBSL) for MSP430FR59xx and MSP430FR69xx MCUs 2015/11/17
      EVM User's guide MSP430FR5969 LaunchPad Development Kit (MSP-EXP430FR5969) User's Guide (Rev. B) 2015/07/20

      설계 및 개발

      추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

      평가 보드

      TSW12D1620EVM-CVAL — 300krad, 12비트, 듀얼 1.6GSPS 또는 단일 3.2GSPS ADC용 ADC12D1620QML-SP 평가 모듈

      TSW12D1620EVM-CVAL은 증폭기, ADC(아날로그-디지털 컨버터), 클로킹, 온도 센서, 마이크로컨트롤러 및 전력 솔루션의 세라믹 엔지니어링 모델을 포함하는 1.5GHz 광대역 수신기 평가 모듈(EVM)입니다. 이 보드는 가까운 DC에서 1.5GHz까지 IF/RF 주파수를 디지털화하는 데 가장 적합합니다.

      아날로그 입력 경로에는 6.5GHz LMH5401-SP를 단일 종단-차동 게인 블록으로 활용하거나 증폭기를 우회하고 차동 신호로 ADC를 구동하는 옵션이 있습니다. 이 증폭기는 12비트 듀얼 1.6GSPS 또는 단일 (...)

      사용 설명서: PDF
      TI.com에서 구매할 수 없음
      평가 보드

      ALGO-3P-UISP1-TI — 텍사스 인스트루먼트 장치용 Algocraft μISP1 프로그래머

      μISP는 호스트 PC(RS-232, USB, LAN 연결 기능이 내장되어 있음)에 연결되어 작동하거나 단독 모드로 작동할 수 있습니다.

      독립 실행형 모드의 프로그래밍 싸이클은 단순히 START 버튼을 누르거나 일부 TTL 제어 라인을 통해 실행될 수 있습니다.

      컴팩트한 크기와 다양한 기능을 갖추고 있어 생산 환경, 수동 및 자동 프로세스에 간편하게 통합할 수 있습니다.

      발송: Algocraft
      개발 키트

      MSP-EXP430FR5969 — MSP430FR5969 LaunchPad™ 개발 키트

      MSP-EXP430FR5969 LaunchPad 개발 키트MSP430FR5969 MCU를 위한 사용하기 쉬운 마이크로컨트롤러 개발 보드입니다. 프로그래밍, 디버깅 및 에너지 측정을 위한 온보드 디버그 에뮬레이션을 포함하여 MSP430FRxx FRAM 플랫폼에서 빠르게 개발을 시작하는 데 필요한 모든 것이 포함되어 있습니다. 이 보드에는 단순한 사용자 인터페이스를 통합할 수 있는 온보드 버튼 및 LED와 외부 전원 공급 장치 없이 독립형 애플리케이션을 지원하는 슈퍼캡이 있습니다. MSP430FR5969 마이크로컨트롤러는 (...)

      사용 설명서: PDF
      TI.com에서 구매할 수 없음
      개발 키트

      MSP-TS430RGZ48C — MSP-TS430RGZ48C - MSP430FRxx FRAM MCU용 48핀 타깃 개발 보드

      The MSP-TS430RGZ48C is a standalone 48-pin ZIF socket target board used to program and debug the MSP430 MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol.

      Device Support: The MSP-TS430RGZ48C development board supports MSP430FR58xx and MSP430FR59xx FRAM MCUs in a (...)

      사용 설명서: PDF | HTML
      TI.com에서 구매할 수 없음
      하드웨어 프로그래밍 도구

      MSP-FET — MSP MCU 프로그래머 및 디버거

      MSP-FET는 디버그 프로브라고도 하는 강력한 에뮬레이션 개발 도구로, 사용자가 MSP 저전력 마이크로컨트롤러(MCU)에서 신속하게 개발을 시작할 수 있게 해줍니다.

      JTAG 및 SBW 인터페이스 모두에서 프로그래밍과 실시간 디버깅을 지원합니다. 또한 MSP-FET는 컴퓨터 USB 인터페이스와 MSP UART 간의 백채널 UART 연결도 제공합니다. 이를 통해 MSP 프로그래머는 MSP와 컴퓨터에서 실행되는 단자 간에 직렬로 통신하는 편리한 방법을 사용할 수 있습니다. 또한 UART 및 I2C 통신 프로토콜을 통해 (...)

      사용 설명서: PDF | HTML
      TI.com에서 구매할 수 없음
      하드웨어 프로그래밍 도구

      ALGO-3P-WRITENOW — Algocraft WriteNow! 프로그래머

      WriteNow! 시스템 내 프로그래머 시리즈는 프로그래밍 산업에서 획기적인 발전입니다. 프로그래머는 다양한 제조업체의 수많은 장치(마이크로컨트롤러, 메모리, CPLD 및 기타 프로그래머블 장치)를 지원하며 간편한 ATE/장치 통합을 위한 컴팩트한 크기를 가지고 있습니다. 이는 단독으로 작동하거나 호스트 PC(RS-232, LAN 및 USB 연결 기능이 내장되어 있음)에 연결되어 있으며 사용이 간편한 소프트웨어 유틸리티가 제공됩니다.

      발송: Algocraft
      코드 예제 또는 데모

      SLAC536 MSP430FR59xx, MSP430FR58xx Code Examples

      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      드라이버 또는 라이브러리

      MSP-DSPLIB Digital Signal Processing (DSP) Library for MSP Microcontrollers

      The TI MSP430™ Digital Signal Processing library is a set of optimized functions to perform common signal processing operations for MSP430 microcontrollers. These functions are used in applications where processing-intensive transforms are done in real-time for minimal energy and with very (...)

      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      찾아보기 다운로드 옵션
      드라이버 또는 라이브러리

      MSP-FRAM-UTILITIES FRAM embedded software utilities for MSP ultra-low-power microcontrollers

      The Texas Instruments FRAM Utilities is designed to grow as a collection of embedded software utilities that leverage the ultra-low-power and virtually unlimited write endurance of FRAM. The utilities are available for MSP430FRxx FRAM microcontrollers and provide example code to help start (...)

      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      다운로드 옵션
      드라이버 또는 라이브러리

      MSP-PMBUS PMBus Software Library for MSP MCUs

      The MSP Power Management Bus (PMBus) embedded software library is a free C library for enabling PMBus master implementation on MSP microcontrollers that have eUSCI/USCI serial communication peripherals. In addition, the library supports alert response (for host notification in the presence of (...)

      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      찾아보기 다운로드 옵션
      드라이버 또는 라이브러리

      MSPMATHLIB — MSP430용 부동 소수점 수학 라이브러리

      MSPMathLib is an accelerated floating point math library for MSP430™ MCUs that delivers up to 26x faster computation for the most commonly used math functions. The library seamlessly integrates with projects to replace floating point math functions such as sin, cos, tan, log, exp and sqrt, (...)
      사용 설명서: PDF
      펌웨어

      MSPFRBOOT MSPFRBOOT

      The bootloader (BSL) on MSP430™ microcontrollers (MCUs) lets users communicate with embedded memory in the MSP MCUs during the prototyping phase, final production, and in service. This is done through standard interfaces such as UART, I2C, SPI, and USB. Both the programmable memory (Flash/FRAM) and (...)

      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      다운로드 옵션
      펌웨어

      SBAC235 MSP430FR5969 Firmware

      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      시작하기

      TI-DEVELOPER-ZONE Start embedded development on your desktop or in the cloud

      From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      IDE, 구성, 컴파일러 또는 디버거

      CCSTUDIO Code Composer Studio integrated development environment (IDE)

      CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)

      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      시작 다운로드 옵션
      IDE, 구성, 컴파일러 또는 디버거

      ENERGYTRACE — EnergyTrace 기술

      EnergyTrace™ software for MSP430™ MCUs, MSP432™ MCUs, CC13xx wireless MCUs and CC26xx wireless MCUs is an energy-based code analysis tool that measures and displays the energy profile of an application and helps optimize it for ultra-low-power consumption.

      As most developers know, it is difficult to (...)

      사용 설명서: PDF
      IDE, 구성, 컴파일러 또는 디버거

      IAR-KICKSTART — IAR Embedded Workbench

      IAR Embedded Workbench는 선택한 대상 마이크로컨트롤러를 위한 임베디드 애플리케이션을 빌드하고 디버깅하는 데 사용되는 완전한 개발 툴 체인을 제공합니다. 포함된 IAR C/C++ 컴파일러는 애플리케이션에 매우 최적화된 코드를 생성합니다. C-SPY 디버거는 복잡한 코드 및 데이터 중단점을 지원하는 소스 및 분해 수준 디버깅이 가능한 완전 통합된 디버거입니다.

      주요 구성 요소:

      • 프로젝트 관리 툴과 편집기가 포함된 통합 개발 환경입니다.
      • 고도로 최적화된 C 및 C++ 컴파일러.
      • 다중 파일 컴파일 지원.
      • 런타임 라이브러리.
      • 링커 (...)
      발송: IAR Systems
      사용 설명서: PDF
      온라인 교육

      MSP430-ACADEMY MSP430™ academy

      MSP430™ academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSP430 MCU portfolio.
      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      운영 체제(OS)

      WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 사전 인증 안전 RTOS

      SAFERTOS®는 임베디드 프로세서를 위해 설계된 고유한 실시간 운영 체제입니다. TÜV SÜD의 IEC 61508 SIL3 및 ISO 26262 ASILD 표준에 따라 사전 인증을 받았습니다. SAFERTOS®는 WHIS 전문가 팀에서 안전을 위해 특별히 제작되었으며, 전 세계적으로 안전이 중요한 응용 분야에 사용됩니다. WHIS와 텍사스 인스트루먼트는 10년 넘게 협력해 왔습니다. 이 기간 동안, WHIS는 SAFERTOS®를 광범위한 TI 프로세서로 이식하여 널리 사용되는 모든 코어를 지원하며 요청 시 추가 아키텍처를 (...)
      소프트웨어 프로그래밍 도구

      MSP-GANG-SOFTWARE MSP-GANG Software

      The MSP Gang Programmer (MSP-GANG) is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical devices at the same time.
      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      다운로드 옵션
      소프트웨어 프로그래밍 도구

      UNIFLASH UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

      UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

      UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

      지원되는 제품 및 하드웨어

      지원되는 제품 및 하드웨어

      시작 다운로드 옵션
      설계 툴

      MSP-3P-SEARCH — MSP 타사 검색 도구

      TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.

      (...)

      레퍼런스 디자인

      TIDA-010931 — 방사능 저항 우주 항공 BMS(배터리 관리 시스템) 레퍼런스 설계

      이 레퍼런스 설계는 우주 항공 등급 배터리 관리 시스템을 보여줍니다. 이 회로는 배터리 상태, 충전 상태 및 온도를 모니터링하기 위해 직렬 연결된 8개의 배터리 셀을 측정합니다.
      Design guide: PDF
      레퍼런스 디자인

      TIDA-010197 — 1% 미만의 정확도를 지원하는 다용도 위성 상태 모니터링 및 제어 플랫폼 레퍼런스 디자인

      이 레퍼런스 설계는 LMP7704-SP의 다기능성을 활용하여 온도, 전압 및 전류를 정확하게 모니터링하여 호스트 보드에 피드백을 제공하는 방사능 강화 위성 원격 측정 시스템을 위한 고도로 모듈화된 설계를 제공합니다. 또한 보호 및 최적의 효율성을 제공하기 위해 제어되는 아날로그 출력을 제공합니다. 대부분의 우주 항공 애플리케이션은 위성의 여러 하위 시스템에서 이러한 세 가지 핵심 측정 가능 정보를 모니터링해야 합니다.
      Design guide: PDF
      회로도: PDF
      레퍼런스 디자인

      TIDA-070004 — 통합 디지털 출력 온도 센서를 사용하는 항공우주 등급 레퍼런스 설계

      이 레퍼런스 설계는 여러 우주선 프로젝트가 지상 직원이 실시간으로 모니터링하는 시스템 상태 원격 측정을 제공한다는 사실을 보여줍니다. 이 레퍼런스 설계는 방사능 저항 MSP430FR5969-SP MCU(마이크로컨트롤러)를 사용하여 서브시스템 온도 데이터를 수집하기 위해 디지털 출력 온도 센서를 사용한 예를 보여줍니다. 이 시스템은 간단한 레지스터 읽기/쓰기 프로토콜을 사용하여 온도 데이터에 대한 호스트 요청에 응답하는 SPI 기반 슬레이브를 구현합니다. 이 레퍼런스 설계에는 ADC12D1620QML-SP의 로컬 온도 감지 및 (...)
      Design guide: PDF
      회로도: PDF
      패키지 CAD 기호, 풋프린트 및 3D 모델
      HTQFP (PHP) 48 Ultra Librarian
      VQFN (RGZ) 48 Ultra Librarian

      주문 및 품질

      포함된 정보:
      • RoHS
      • REACH
      • 디바이스 마킹
      • 납 마감/볼 재질
      • MSL 등급/피크 리플로우
      • MTBF/FIT 예측
      • 물질 성분
      • 인증 요약
      • 지속적인 신뢰성 모니터링
      포함된 정보:
      • 팹 위치
      • 조립 위치

      권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

      지원 및 교육

      TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

      콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

      품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

      동영상