CC2340R2
Wireless microcontroller
- Optimized 48MHz Arm Cortex-M0+ processor
- Up to 512KB of in-system programmable flash
- 12KB of ROM for bootloader and drivers
- Up to 64KB of ultra-low leakage SRAM. Full RAM retention in standby mode
- 2.4GHz RF transceiver compatible with Bluetooth Low Energy and IEEE 802.15.4 PHY and MAC
- Integrated balun
- Supports over-the-air upgrade (OTA)
- Serial wire debug (SWD)
Low power consumption
- MCU consumption:
- 2.6mA active mode, CoreMark
- 53µA/MHz running CoreMark
- < 710nA standby mode on CC2340R52
- 165nA shutdown mode, wake-up on pin
- Radio consumption:
- 5.3mA RX
- 5.1mA TX at 0dBm
- < 11.0mA TX at +8dBm
Wireless protocol support
-
Bluetooth LE
- Features: LE 2M, LE Coded, Periodic Advertising, Extended Advertising, LE Secure Connections
- Qualified against Bluetooth Core 5.4
- Zigbee®
- Thread
- Proprietary systems
High-performance radio
- –102dBm sensitivity for Bluetooth® LE Coded 125kbps
- –96.5dBm sensitivity for Bluetooth® LE 1Mbps
- –98dBm sensitivity for IEEE 802.15.4 (2.4GHz)
- Output power up to +8dBm with temperature compensation
Regulatory compliance
- Suitable for systems targeting compliance with these standards:
- EN 300 328 (Europe)
- FCC CFR47 Part 15
- ARIB STD-T66 (Japan)
MCU peripherals
- Up to 26 I/O pads
- Two IO pads SWD, muxed with GPIOs
- Two IO pads LFXT, muxed with GPIOs
- Up to 22 DIOs (analog or digital IOs)
- Up to 3 × 16-bit and 1× 24-bit general-purpose timers with quadrature decode mode and IR generation mode
- 12-bit ADC, 1.2Msps with external reference, 267ksps with internal reference, up to 12 external ADC inputs
- 1× low power comparator
- 1× UART
- 1× SPI
- 1× I2C
- Real-time clock (RTC)
- Integrated temperature and battery monitor
- Watchdog timer
Security enablers
- AES 128-bit cryptographic accelerator
- Random number generator from on-chip analog noise
Development tools and software
- LP-EM-CC2340R53 LaunchPad Development Kit
- SimpleLink™ Low Power F3 software development kit
- SmartRF™ Studio for simple radio configuration
- SysConfig system configuration tool
Operating range
- On-chip buck DC/DC converter
- 1.71V to 3.8V single supply voltage
- Tj: –40°C up to +125°C
RoHS-compliant package
- 5mm × 5mm RKP QFN40
- 4mm × 4mm RGE QFN24
- 2.2mm × 2.6mm YBG WCSP
The CC2340R SimpleLink™ family of devices are 2.4GHz wireless microcontrollers (MCUs), targeting Bluetooth Low Energy, Zigbee, Thread, and Proprietary 2.4GHz applications. These devices are optimized for low-power wireless communication with Over the Air Download (OAD) support in Building automation (wireless sensors, lighting control, beacons), asset tracking, medical, retail EPOS (electronic point of sale), ESL (electronic shelf), and Personal electronics (toys, HID, stylus pens) markets. Highlighted features of this device include:
- Support for Bluetooth 5 features: high-speed mode (2Mbps PHY), long-range (LE Coded 125kbps and 500kbps PHYs), privacy 1.2.1 and channel selection algorithm #2, as well as backward compatibility and support for key features from the earlier Bluetooth LE specifications.
- Fully qualified Bluetooth software protocol stack included with the SimpleLink™ Low Power F3 software development kit (SDK)
- Zigbee® protocol stack support in the SimpleLink™ Low Power F3 software development kit (SDK)
- Thread protocol stack support in SIMPLELINK TI OPENTHREAD SDK
- Ultra-low standby current less than 0.71µA with RTC operational and full RAM retention that enables significant battery life extension, especially for applications with longer sleep intervals.
- Integrated balun for reduced bill-of-material (BOM) board layout
- Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth Low Energy (–102dBm for 125kbps LE Coded PHY, with integrated balun)
The CC2340R family is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single-core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100-percent code reuse when your design requirements change. For more information, visit the SimpleLink™ MCU platform.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | CC2340R SimpleLink™ Family of 2.4GHz Wireless MCUs datasheet (Rev. F) | PDF | HTML | 2025. 11. 7 | |
| * | 사용 설명서 | CC23xx SimpleLink Wireless MCU Technical Reference Manual (Rev. A) | PDF | HTML | 2024. 8. 7 | |
| * | 정오표 | CC2340R2 SimpleLink™ Wireless MCU Device Revision B (Rev. A) | PDF | HTML | 2024. 8. 23 | |
| 사이버 보안 권고 | Invalid Bluetooth® LE Data Length Extension (DLE) Parameter Leading to DoS | PDF | HTML | 2026. 5. 28 | ||
| 사이버 보안 권고 | Denial of Service during Bluetooth LE authentication and connection | PDF | HTML | 2026. 5. 28 | ||
| 애플리케이션 노트 | How to Certify Your Bluetooth Product (Rev. N) | PDF | HTML | 2025. 11. 18 | ||
| Product overview | 고품질 RF 설계를 더욱 경제적으로 만드는 무선 MCU 및 Zigbee ZBOSS 소프트웨어 | PDF | HTML | Download English Version | 2024. 7. 18 | |
| 애플리케이션 노트 | Configuring Bluetooth LE devices for Direct Test Mode | PDF | HTML | 2022. 2. 25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP-EM-CC2340R5 — SimpleLink™ Bluetooth® 5.3 Low Energy MCU용 CC2340R5 LaunchPad™ 개발 키트
Bluetooth 5 LE(Low Energy) 및 2.4GHz 독점 프로토콜을 지원하는 SimpleLink Bluetooth Low Energy MCU를 이용한 개발을 가속화하는 데 사용되는 LaunchPad 개발 키트입니다. SimpleLink 저전력 F3 소프트웨어 개발 키트(SDK)가 소프트웨어 지원을 제공합니다.
DREAM-3P-CC2340 — DreamLNK CC2340 Bluetooth 모듈
DL-CC2340-A 및 DL-CC2340-B Bluetooth 저에너지 모듈은 모두 48MHz Cortex-M0+ 커널을 사용하여 최대 512KB의 플래시 메모리, 36KB SRAM과 최대 26개의 범용 I/O 인터페이스를 가진 TI SimpleLink CC2340R5 Bluetooth 저에너지 장치를 기반으로 설계되었습니다. 또한 이러한 Bluetooth 저에너지 모듈에는 48MHz 10ppm 외부 고속 클록과 32.768kHz 외부 저속 클록이 내장되어 있습니다.
DL-CC2340-A Bluetooth 저에너지 모듈은 (...)
LP-XDS110 — XDS110 LaunchPad™ 개발 키트 디버거
LP-XDS110 LaunchPad 개발 키트 디버거는 텍사스 인스트루먼트(TI) 마이크로컨트롤러, 마이크로프로세서 및 DSP XDS 호환 장치의 프로그래밍 및 디버깅용 도구입니다. LP-XDS110은 20핀 엣지 커넥터를 통해 분할 LaunchPad에 직접 연결하도록 설계된 제품이지만, XDS110 출력 커넥터를 사용해 다른 LaunchPad 및 XDS 호환 장치 디버깅에도 사용할 수 있습니다.
LP-XDS110ET — XDS110ET LaunchPad™ 개발 키트 디버거(EnergyTrace™ 소프트웨어 포함)
LP-XDS110ET LaunchPad 개발 키트 디버거는 텍사스 인스트루먼트(TI) 마이크로컨트롤러, 마이크로프로세서 및 DSP XDS 호환 장치의 프로그래밍 및 디버깅용 도구입니다. LP-XDS110ET는 20핀 엣지 커넥터를 통해 분할 LaunchPad 개발 키트에 직접 연결하도록 설계된 제품이지만, XDS110 출력 커넥터를 사용해 다른 LaunchPad 개발 키트 및 XDS 호환 장치 디버깅에도 사용할 수 있습니다. LP-XDS110ET는 EnergyTrace™ 소프트웨어를 지원하기 위해 전력 측정용 회로를 추가했습니다.
BTV-3P-FMC — TI M0 홈 피트니스 기기 자체 전원 제어 및 통신 솔루션
BTV-3P-FMC 솔루션은 자체 전원 제어 모듈과 Bluetooth 통신 제어 모듈의 두 가지 기능 모듈을 포함하여 홈 피트니스 기기의 제어 및 통신 기능을 제공합니다.
로잉 머신, 실내 운동용 자전거 등 홈 피트니스 기기를 위해 설계된 이 솔루션은 사용자의 운동으로 발생하는 운동 에너지가 발전기를 구동하여 시스템 전체에 전원을 공급하고, 운동 저항 수준을 제어하며, 운동 지표를 측정하고, 모바일/패드/클라우드와 통신할 수 있습니다.
TTC-3P-BLUETOOTH-MODULES — TTC Bluetooth 저에너지 모듈
HY-23400XP는 저전력 스마트 장치 및 loT 애플리케이션을 대상으로 하는 고집적 Bluetooth 5.3 모듈인 Bluetooth 저에너지 애플리케이션에 필요한 모든 기능을 통합합니다.
HY-234001P는 저전력 제품 애플리케이션을 위한 프로그래머블 GPIO 10개를 제공하며 다양한 PCB 안테나를 제공합니다.
HY-23400XP는 고객 애플리케이션을 위한 무선, 스택, 프로필 및 애플리케이션 공간 등 모든 Bluetooth 저에너지 기능을 제공합니다. 또한 모듈은 센서 연결을 위한 유연한 하드웨어 인터페이스를 (...)
BDE-3P-LE2340 — BDE LE2340 무선 모듈
BDE-3P-LE2340 modules are Bluetooth® 5.3 Low Energy wireless modules based on the CC2340R. With their low cost and exceptional RF and power consumption performance, these modules are ideal for applications that are cost-sensitive and require extended battery life. Multiple variants are available to (...)
TMDSEMU110-U — XDS110 JTAG 디버그 프로브
텍사스 인스트루먼트 XDS110은 TI 임베디드 프로세서를 위한 새로운 디버그 프로브(에뮬레이터)입니다. XDS110은 XDS100 제품군을 대체하면서 하나의 포드로 더 다양한 표준(IEEE1149.1, IEEE1149.7, SWD)을지원합니다. 또한 모든 XDS 디버그 프로브는 ETB(Embedded Trace Buffer)가 포함되어 있는 모든 Arm® 및 DSP 프로세서에서 코어(Core) 및 시스템 트레이스(System Trace)를 지원합니다. 핀을 통한 코어 추적의 경우 XDS560v2 PRO TRACE가 필요합니다.
(...)SIMPLELINK-LOWPOWER-F3-SDK — SimpleLink™ Low Power F3 software development kit (SDK) for the CC23xx and CC27xx devices
SimpleLink™ 저전력 SDK는 CC13xx, CC23xx, CC26xx 및 CC27xx 제품군을 지원합니다. 이러한 SDK는 SimpleLink CC13xx, CC23xx, CC26xx 및 CC27xx 무선 MCU에서 Bluetooth® 저에너지, Mesh, Zigbee®, Matter, Thread, 802.15.4 기반, 독점 및 멀티프로토콜 솔루션을 지원하는 등 Sub-1GHz 및 2.4GHz 애플리케이션 개발을 위한 포괄적인 소프트웨어 패키지를 제공합니다.
DSR-3P-ZBOSS — ZBOSS는 독립적인 휴대용 고성능 Zigbee 소프트웨어 프로토콜 스택입니다.
ZBOSS는 DSR Corporation에서 개발한 Zigbee PRO 소프트웨어 프로토콜 스택입니다. ZBOSS는 기업이 Zigbee 솔루션을 포팅, 사용자 지정, 테스트 및 최적화와 같은 상호 운용성 문제를 극복할 수 있도록 지원합니다. Zigbee는 다양한 플랫폼, 제품 및 지원의 에코시스템을 위한 상호 운용 가능한 개방형 풀 스택 IoT 기술입니다. ZBOSS Zigbee PRO 2023은 모든 역할, 다양한 클러스터 라이브러리, 업계 최고의 Zigbee 스마트 홈 에코시스템을 지원합니다. ZBOSS는 크로스 플랫폼 지원, (...)
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
CCSTUDIO-OPENOCD — OpenOCD Binary Releases
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
SIMPLELINK-ACADEMY-CC23XX — Simplelink™ CC23xx Academy
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.
UniFlash는 CCStudio™ 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.
macOS는 mmWave, AMx, K2G 및 (...)
SMARTRF-STUDIO-8 — CC23xx, CC27xx 장치 및 CC140xP 트랜시버용 SmartRF Studio 8 애플리케이션 소프트웨어
SmartRF™ Studio는 RF 시스템 설계자가 모든 TI CC1xxx 및 CC2xxx 저전력 RF 장치 설계 공정의 초기 단계에 무선 기능을 손쉽게 평가할 수 있도록 지원하는 Windows 애플리케이션입니다. 구성 레지스터 값 및 명령의 생성과 RF 시스템의 실무 테스트 및 디버깅을 간소화합니다.
SmartRF Studio는 다음과 같은 TI 장치를 지원합니다.
리소스
HN-3P-BLE-TOOLKIT — TI SimpleLink™ 무선 MCU를 위한 Hubble Network 글로벌 Bluetooth® 저에너지 연결
Hubble Network 펌웨어는 셀룰러 모뎀, 위성 라디오 또는 사용자 지정 하드웨어 없이도 CC2340 및 CC2755 장치 제품군을 포함한 텍사스 인스트루먼트 SimpleLink™ Bluetooth 저에너지(LE) MCU의 글로벌 자산 가시성을 지원합니다. 표준 TI Bluetooth LE MCU에서 Hubble 펌웨어를 실행하는 제품은 Hubble의 1억 개 이상의 게이트웨이와 위성 네트워크를 통해 위치 및 센서 데이터를 보고할 수 있습니다.
Hubble 지원 장치는 Bluetooth LE 광고를 전송합니다. 주변 (...)
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx, CC23xx, and CC27xx devices
SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices
SimpleLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 귀중한 피드백을 제공할 수 있는 주제 전문가와 일대일로 연락할 수 있는 방법을 제공합니다. 간단한 3단계 검토 요청 절차와 관련 기술 문서 및 리소스 링크는 여기서 확인할 수 있습니다.
시작하기
일반 설계 질문은 2.4GHz 하드웨어 설계 검토를 요청하기 전에 E2E 포럼에 게시해야 합니다.
하드웨어 설계 검토 요청 양식과 함께 전송할 다음 필수 문서가 준비되어 있는지 확인하세요:
- 데이터 시트, 설계 가이드, 사용 설명서 및 기타 하드웨어 리소스와 같이 제품 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGE) | 24 | Ultra Librarian |
| VQFN (RKP) | 40 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.