Home Datenwandler Analog-Digital-Wandler (ADCs) Highspeed-ADCs (≥ 10 MSPS)
Home
Datenwandler
Analog-Digital-Wandler (ADCs)
Highspeed-ADCs (≥ 10 MSPS)

ADS58C48

AKTIV

Vierkanaliger, Analog-Digital-Wandler (ADC), 11 Bit, 200 MSPS

Jetzt bestellen
Datenblatt

ADS58C48

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Sample rate (max) (Msps) 200 Resolution (Bits) 11 Number of input channels 4 Interface type Parallel CMOS, Parallel LVDS Analog input BW (MHz) 600 Features Low Power Rating Catalog Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 900 Architecture Pipeline SNR (dB) 66.7 ENOB (Bits) 10.7 SFDR (dB) 84 Operating temperature range (°C) -40 to 85 Input buffer No
Sample rate (max) (Msps) 200 Resolution (Bits) 11 Number of input channels 4 Interface type Parallel CMOS, Parallel LVDS Analog input BW (MHz) 600 Features Low Power Rating Catalog Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 900 Architecture Pipeline SNR (dB) 66.7 ENOB (Bits) 10.7 SFDR (dB) 84 Operating temperature range (°C) -40 to 85 Input buffer No
HTQFP (PFP) 80 196 mm² (14 mm × 14 mm)
  • Maximum Sample Rate: 200 MSPS
  • High Dynamic Performance
    • SFDR 82 dBc at 140 MHz
    • 72.3 dBFS SNR in 60 MHz BW Using SNRBoost3G technology
  • SNRBoost3G Highlights
    • Supports Wide Bandwidth up to 60 MHz
    • Programmable Bandwidths – 60 MHz, 40 MHz, 30 MHz, 20 MHz
    • Flat Noise Floor within the Band
    • Independent SNRBoost3G Coefficients for Every Channel
  • Output Interface
    • Double Data Rate (DDR) LVDS with Programmable Swing and Strength
      • Standard Swing: 350mV
      • Low Swing: 200mV
      • Default Strength: 100 Termination
      • 2x Strength: 50 Termination
    • 1.8V Parallel CMOS Interface Also Supported
  • Ultra-Low Power with Single 1.8V Supply
    • 0.9W Total Power
    • 1.32 W Total Power (200 MSPS) with SNRBoost3G on all 4 Channels
    • 1.12 W Total Power (200 MSPS) with SNRBoost3G on 2 Channels
  • Programmable Gain up to 6dB for SNR/SFDR Trade-Off
  • DC Offset Correction
  • Supports Low Input Clock Amplitude
  • 80-TQFP Package
  • Maximum Sample Rate: 200 MSPS
  • High Dynamic Performance
    • SFDR 82 dBc at 140 MHz
    • 72.3 dBFS SNR in 60 MHz BW Using SNRBoost3G technology
  • SNRBoost3G Highlights
    • Supports Wide Bandwidth up to 60 MHz
    • Programmable Bandwidths – 60 MHz, 40 MHz, 30 MHz, 20 MHz
    • Flat Noise Floor within the Band
    • Independent SNRBoost3G Coefficients for Every Channel
  • Output Interface
    • Double Data Rate (DDR) LVDS with Programmable Swing and Strength
      • Standard Swing: 350mV
      • Low Swing: 200mV
      • Default Strength: 100 Termination
      • 2x Strength: 50 Termination
    • 1.8V Parallel CMOS Interface Also Supported
  • Ultra-Low Power with Single 1.8V Supply
    • 0.9W Total Power
    • 1.32 W Total Power (200 MSPS) with SNRBoost3G on all 4 Channels
    • 1.12 W Total Power (200 MSPS) with SNRBoost3G on 2 Channels
  • Programmable Gain up to 6dB for SNR/SFDR Trade-Off
  • DC Offset Correction
  • Supports Low Input Clock Amplitude
  • 80-TQFP Package

The ADS58C48 is a quad channel 11-bit A/D converter with sampling rate up to 200 MSPS. It uses innovative design techniques to achieve high dynamic performance, while consuming extremely low power at 1.8V supply. This makes it well-suited for multi-carrier, wide band-width communications applications.

The ADS58C48 uses third-generation SNRBoost3G technology to overcome SNR limitation due to quantization noise (for bandwidths < Nyquist, Fs/2). Enhancements in the SNRBoost3G technology allow support for SNR improvements over wide bandwidths (up to 60 MHz). In addition, separate SNRBoost3G coefficients can be programmed for each channel.

The device has digital gain function that can be used to improve SFDR performance at lower full-scale input ranges. It includes a dc offset correction loop that can be used to cancel the ADC offset.

The digital outputs of all channels are output as DDR LVDS (Double Data Rate) together with an LVDS clock output. The low data rate of this interface (400Mbps at 200 MSPS sample rate) makes it possible to use low-cost FPGA-based receivers. The strength of the LVDS output buffers can be increased to support 50 ohms differential termination. This allows the output clock signal to be connected to two separate receiver chips with an effective 50 termination (such as the two clock ports of the GC5330).

The same digital output pins can also be configured as a parallel 1.8V CMOS interface.

It includes internal references while the traditional reference pins and associated decoupling capacitors have been eliminated. The device is specified over the industrial temperature range (–40°C to 85°C).

The ADS58C48 is a quad channel 11-bit A/D converter with sampling rate up to 200 MSPS. It uses innovative design techniques to achieve high dynamic performance, while consuming extremely low power at 1.8V supply. This makes it well-suited for multi-carrier, wide band-width communications applications.

The ADS58C48 uses third-generation SNRBoost3G technology to overcome SNR limitation due to quantization noise (for bandwidths < Nyquist, Fs/2). Enhancements in the SNRBoost3G technology allow support for SNR improvements over wide bandwidths (up to 60 MHz). In addition, separate SNRBoost3G coefficients can be programmed for each channel.

The device has digital gain function that can be used to improve SFDR performance at lower full-scale input ranges. It includes a dc offset correction loop that can be used to cancel the ADC offset.

The digital outputs of all channels are output as DDR LVDS (Double Data Rate) together with an LVDS clock output. The low data rate of this interface (400Mbps at 200 MSPS sample rate) makes it possible to use low-cost FPGA-based receivers. The strength of the LVDS output buffers can be increased to support 50 ohms differential termination. This allows the output clock signal to be connected to two separate receiver chips with an effective 50 termination (such as the two clock ports of the GC5330).

The same digital output pins can also be configured as a parallel 1.8V CMOS interface.

It includes internal references while the traditional reference pins and associated decoupling capacitors have been eliminated. The device is specified over the industrial temperature range (–40°C to 85°C).
filter Andere Highspeed-ADCs (≥ 10 MSPS) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 11
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt Quad Channel IF Receiver with SNRBoost 3G datasheet 27.05.2010
Anwendungshinweis Band-Pass Filter Design Techniques for High-Speed ADCs 27.02.2012
Anwendungshinweis High-Speed, Analog-to-Digital Converter Basics 11.01.2012
Anwendungshinweis Power Supply Design for the ADS41xx (Rev. A) 29.12.2011
Anwendungshinweis Understanding Low-Amplitude Behavior of 11-bit ADCs 22.10.2011
Anwendungshinweis Driving High-Speed ADCs: Circuit Topologies and System-Level Parameters (Rev. A) 10.09.2010
Anwendungshinweis Using Windowing With SNRBoost 3G Technology 30.08.2010
Anwendungshinweis Smart Selection of ADC/DAC Enables Better Design of Software-Defined Radio 28.04.2009
Anwendungshinweis CDCE62005 as Clock Solution for High-Speed ADCs 04.09.2008
Anwendungshinweis CDCE72010 as a Clocking Solution for High-Speed Analog-to-Digital Converters 08.06.2008
Anwendungshinweis Phase Noise Performance and Jitter Cleaning Ability of CDCE72010 02.06.2008

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

ADS58C28EVM — ADS58C28 Zweikanal, 11 Bit, 200 MSPS, Analog-zu-Digital-Wandler – Evaluierungsmodul

ADS58C28EVM ist eine Platine, die es Entwickelnden ermöglicht, die Leistung des ADS58C28-Bausteins von Texas Instruments zu testen, der ein Zweikanal-Analog-Digital-Wandler mit 11 Bit, 200 MSPS und SNRBoost-Technologie von TI ist. Das ADC-EVM verfügt über einen DDR-LVDS-Datenausgang, der zur (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
GUI für Evaluierungsmodul (EVM)

ADS58C48SPI-SW — ADS58C48 SPI Software

The ADS58C28 EVM software GUI allows for programming control of the ADS58C48.
Unterstützte Produkte und Hardware
GUI für Evaluierungsmodul (EVM)

DATACONVERTERPRO-SW — High Speed Data Converter Pro GUI-Installationsprogramm, v5.31

Diese Pro-GUI für Hochgeschwindigkeits-Datenwandler ist ein PC-Programm (Windows® XP/7/10-kompatibel), das entwickelt wurde, um die Evaluierung der meisten Hochgeschwindigkeits-Datenwandler von TI [Analog-Digital-Wandler (ADC) und Digital-Analog-Wandler (DAC)] sowie analoge Frontend-Plattformen (...)

Unterstützte Produkte und Hardware
Support-Software

SBAC120 — TIGAR Support Files

Unterstützte Produkte und Hardware
Berechnungstool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

Der Rechner für Analogtechniker beschleunigt viele der sich wiederholenden Berechnungen, die Entwickler von analogen Schaltungsdesigns regelmäßig durchführen müssen. Dieses PC-basierte Tool bietet eine grafische Schnittstelle mit einer Liste verschiedener gebräuchlicher Berechnungen. Das Spektrum (...)

Unterstützte Produkte und Hardware
Berechnungstool

JITTER-SNR-CALC — Jitter and SNR calculator

JITTER-SNR-CALC can be used for calculating theoretical Signal to Noise (SNR) performance of ADCs based on input frequency and clock jitter.

Unterstützte Produkte und Hardware
Designtool

SBAC119 — TIGAR (Texas Instruments Graphical Evaluation of ADC Response Tool)

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTQFP (PFP) 80 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos