Home Datenwandler Analog-Digital-Wandler (ADCs) Präzisions-ADCs
Home
Datenwandler
Analog-Digital-Wandler (ADCs)
Präzisions-ADCs

ADS1283

AKTIV

Extrem hochauflösender 2-Kanal-Delta-Sigma-ADC mit 4 kSPS und PGA für seismische und Energie-Erkundu

Jetzt bestellen
Datenblatt

ADS1283

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Resolution (Bits) 31 Sample rate (max) (ksps) 4 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 1.15, 3.75 Input voltage range (min) (V) -1.9, 0.7 Features PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 18 Analog supply voltage (min) (V) -2.5, 0 Analog supply voltage (max) (V) 2.5, 5 SNR (dB) 130 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
Resolution (Bits) 31 Sample rate (max) (ksps) 4 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 1.15, 3.75 Input voltage range (min) (V) -1.9, 0.7 Features PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 18 Analog supply voltage (min) (V) -2.5, 0 Analog supply voltage (max) (V) 2.5, 5 SNR (dB) 130 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
VQFN (RHF) 24 20 mm² 5 x 4
  • High Resolution:
    • SNR: 130 dB (250 SPS, PGA = 1)
  • High Accuracy:
    • THD: –122 dB
  • Low Power Consumption:
    • 18 mW (PGA = 1, 2, 4, or 8)
    • Shutdown Mode: 10 µW
  • Low-Noise PGA: 5 nV/√Hz
  • Two-Channel Input Multiplexer
  • Inherently-Stable Modulator With Fast Responding Overrange Detector
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Response
    • Programmable High-Pass Filter
    • Selectable FIR Data Rates:
      250 SPS to 4 kSPS
  • Offset and Gain Calibration Engine
  • SYNC Input
  • Analog Supply: 5 V or ±2.5 V
  • Digital Supply: 1.8 V to 3.3 V
  • High Resolution:
    • SNR: 130 dB (250 SPS, PGA = 1)
  • High Accuracy:
    • THD: –122 dB
  • Low Power Consumption:
    • 18 mW (PGA = 1, 2, 4, or 8)
    • Shutdown Mode: 10 µW
  • Low-Noise PGA: 5 nV/√Hz
  • Two-Channel Input Multiplexer
  • Inherently-Stable Modulator With Fast Responding Overrange Detector
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Response
    • Programmable High-Pass Filter
    • Selectable FIR Data Rates:
      250 SPS to 4 kSPS
  • Offset and Gain Calibration Engine
  • SYNC Input
  • Analog Supply: 5 V or ±2.5 V
  • Digital Supply: 1.8 V to 3.3 V

The ADS1283 is an extremely high-performance, single-chip, analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (mux). The ADS1283 is suitable for the demanding needs of seismic monitoring equipment.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator digital output is digitally filtered and decimated by the on-chip digital filter to yield the ADC conversion result.

The flexible input mux provides an additional external input for measurement, as well as internal self-test input connections. The PGA features outstanding low noise (5 nV/√Hz) and very-high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains.

The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.

The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1283 devices.

The ADS1283 is available in a compact 24-lead, 5-mm × 4-mm VQFN package, and is fully specified from –40°C to +85°C, with a maximum operating temperature range of –50°C to +125°C.

The ADS1283 is an extremely high-performance, single-chip, analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (mux). The ADS1283 is suitable for the demanding needs of seismic monitoring equipment.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator digital output is digitally filtered and decimated by the on-chip digital filter to yield the ADC conversion result.

The flexible input mux provides an additional external input for measurement, as well as internal self-test input connections. The PGA features outstanding low noise (5 nV/√Hz) and very-high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains.

The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.

The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1283 devices.

The ADS1283 is available in a compact 24-lead, 5-mm × 4-mm VQFN package, and is fully specified from –40°C to +85°C, with a maximum operating temperature range of –50°C to +125°C.
filter Andere Präzisions-ADCs suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
ADS1285 AKTIV Hochauflösender 32-Bit-Zweikanal-Delta-Sigma-ADC für seismische Untersuchungen und die Georaum-Er Higher dynamic range (134 dB) and lower power (4.8 mW)  

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 5
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet ADS1283 High-Resolution, Analog-to-Digital Converter datasheet (Rev. C) PDF | HTML 27 Aug 2019
Application note Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) PDF | HTML 18 Mär 2024
Application note QFN and SON PCB Attachment (Rev. C) PDF | HTML 06 Dez 2023
Application note Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 29 Mär 2023
E-book Fundamentals of Precision ADC Noise Analysis (Rev. A) 19 Jun 2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

ADS1283 IBIS Model

SBAM368.ZIP (135 KB) - IBIS Model
Herunterladen
Berechnungstool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start Herunterladen
Designtool

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese Design- und Simulationssuite mit vollem Funktionsumfang verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RHF) 24 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos