OPA354A-Q1

AKTIV

CMOS-Einzel-Operationsverstärker, 250 MHz, Rail-to-Rail-E/A

Jetzt bestellen

Datenblatt

document-pdfAcrobat OPAx354-Q1 250-MHz, Rail-to-Rail I/O, CMOS Operational Amplifiers datasheet (Rev. F) (Englisch) PDF | HTML

OPA354A-Q1

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Architecture

FET / CMOS Input, Voltage FB

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.5

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

GBW (typ) (MHz)

100

BW at Acl (MHz)

250

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

150

Vn at flatband (typ) (nV√Hz)

6.5

Vn at 1 kHz (typ) (nV√Hz)

70

Iq per channel (typ) (mA)

4.9

Vos (offset voltage at 25°C) (max) (mV)

8

Rail-to-rail

In, Out

Rating

Automotive

Operating temperature range (°C)

-40 to 125

CMRR (typ) (dB)

80

Input bias current (max) (pA)

50

Offset drift (typ) (µV/°C)

4

Iout (typ) (mA)

100

2nd harmonic (dBc)

75

3rd harmonic (dBc)

83

Frequency of harmonic distortion measurement (MHz)

1

Architecture

FET / CMOS Input, Voltage FB

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.5

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

GBW (typ) (MHz)

100

BW at Acl (MHz)

250

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

150

Vn at flatband (typ) (nV√Hz)

6.5

Vn at 1 kHz (typ) (nV√Hz)

70

Iq per channel (typ) (mA)

4.9

Vos (offset voltage at 25°C) (max) (mV)

8

Rail-to-rail

In, Out

Rating

Automotive

Operating temperature range (°C)

-40 to 125

CMRR (typ) (dB)

80

Input bias current (max) (pA)

50

Offset drift (typ) (µV/°C)

4

Iout (typ) (mA)

100

2nd harmonic (dBc)

75

3rd harmonic (dBc)

83

Frequency of harmonic distortion measurement (MHz)

1

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level:
  - C6 for OPA354A-Q1 and OPA2354A-Q1
  - C3 for OPA4354-Q1
Unity-Gain Bandwidth: 250 MHz
Wide Bandwidth: 100-MHz GBW Product
High Slew Rate: 150 V/µs
Low Noise: 6.5 nV/√Hz
Rail-to-Rail I/O
High Output Current: >100 mA
Excellent Video Performance
- Differential Gain Error: 0.02%
- Differential Phase Error: 0.09°
- 0.1-dB Gain Flatness: 40 MHz
Low Input Bias Current: 3 pA
Quiescent Current: 4.9 mA
Thermal Shutdown
Supply Range: 2.5 V to 5.5 V

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level:
  - C6 for OPA354A-Q1 and OPA2354A-Q1
  - C3 for OPA4354-Q1
Unity-Gain Bandwidth: 250 MHz
Wide Bandwidth: 100-MHz GBW Product
High Slew Rate: 150 V/µs
Low Noise: 6.5 nV/√Hz
Rail-to-Rail I/O
High Output Current: >100 mA
Excellent Video Performance
- Differential Gain Error: 0.02%
- Differential Phase Error: 0.09°
- 0.1-dB Gain Flatness: 40 MHz
Low Input Bias Current: 3 pA
Quiescent Current: 4.9 mA
Thermal Shutdown
Supply Range: 2.5 V to 5.5 V

The design of the OPAx354-Q1 family of high-speed, voltage-feedback CMOS operational amplifiers is for video and other applications requiring wide bandwidth. These devices are unity-gain stable and can drive large output currents. Differential gain is 0.02% and differential phase is 0.09°. Quiescent current is only 4.9 mA per channel.

The OPAx354-Q1 family of operational amplifiers (op-amps) are optimized for operation on single or dual supplies as low as 2.5 V (±1.25 V) and up to 5.5 V (±2.75 V). Common-mode input range extends beyond the supplies. The output swing is within 100 mV of the rails, supporting wide dynamic range.

The single-supply version (OPA354A-Q1) is available in the tiny SOT–23-5 (DBV) package. The dual-supply version (OPA2354A-Q1) is available in the miniature VSSOP-8 (DGK) package and features completely independent circuitry for lowest crosstalk and freedom from interaction. The quad-supply version (OPA4354-Q1) is available in the TSSOP-14 (PW) package. The device specifications are for operation over the automotive temperature range of –40°C to +125°C.

The design of the OPAx354-Q1 family of high-speed, voltage-feedback CMOS operational amplifiers is for video and other applications requiring wide bandwidth. These devices are unity-gain stable and can drive large output currents. Differential gain is 0.02% and differential phase is 0.09°. Quiescent current is only 4.9 mA per channel.

The OPAx354-Q1 family of operational amplifiers (op-amps) are optimized for operation on single or dual supplies as low as 2.5 V (±1.25 V) and up to 5.5 V (±2.75 V). Common-mode input range extends beyond the supplies. The output swing is within 100 mV of the rails, supporting wide dynamic range.

The single-supply version (OPA354A-Q1) is available in the tiny SOT–23-5 (DBV) package. The dual-supply version (OPA2354A-Q1) is available in the miniature VSSOP-8 (DGK) package and features completely independent circuitry for lowest crosstalk and freedom from interaction. The quad-supply version (OPA4354-Q1) is available in the TSSOP-14 (PW) package. The device specifications are for operation over the automotive temperature range of –40°C to +125°C.

filter

Andere Hochgeschwindigkeits-Operationsverstärker (Transitfrequenz ≥ 50 MHz) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 4

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	OPAx354-Q1 250-MHz, Rail-to-Rail I/O, CMOS Operational Amplifiers datasheet (Rev. F)	PDF \| HTML	14.05.2018
	Informationen zur funktionalen Sicherheit	OPA354A-Q1 Functional Safety FIT Rate, FMD and Pin FMA	PDF \| HTML	10.12.2024
	Application brief	Quickly Detecting Overcurrent Faults With Low-Side Current Shunt Measurement Required for SiC or GaN Switches	PDF \| HTML	14.08.2024
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28.03.2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell