INA236

AKTIV

Hochpräzises digitales I²C-Überwachungsmodul für Strom (48 V, 16 Bit), mit Alarm in WCSP

Jetzt bestellen

Datenblatt

document-pdfAcrobat INA236 48-V, 16-Bit, Ultra-Precise, Current, Voltage, and Power Monitor With an I2C Interface datasheet (Rev. D) (Englisch) PDF | HTML

INA236

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Common-mode voltage (max) (V)

48

Common-mode voltage (min) (V)

-0.3

Digital interface

I2C

Resolution (Bits)

16

Input offset (±) (max) (µV)

5

Input offset drift (±) (max) (µV/°C)

0.025

Input offset drift (±) (typ) (µV/°C)

0.005

Voltage gain (V/V)

1

CMRR (min) (dB)

136

Iq (max) (mA)

0.5

Features

Alert Function, Bidirectional, Integrated Power Monitor, Low-side Capable, Ultra precise

Number of channels

1

Power measurement accuracy (%)

0.2

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Common-mode voltage (max) (V)

48

Common-mode voltage (min) (V)

-0.3

Digital interface

I2C

Resolution (Bits)

16

Input offset (±) (max) (µV)

5

Input offset drift (±) (max) (µV/°C)

0.025

Input offset drift (±) (typ) (µV/°C)

0.005

Voltage gain (V/V)

1

CMRR (min) (dB)

136

Iq (max) (mA)

0.5

Features

Alert Function, Bidirectional, Integrated Power Monitor, Low-side Capable, Ultra precise

Number of channels

1

Power measurement accuracy (%)

0.2

Rating

Catalog

Operating temperature range (°C)

-40 to 125

DSBGA (YBJ)

8

0.2316 mm² (1.2 mm × 0.193 mm)

SOT-23-THN (DDF)

8

8.12 mm² (2.9 mm × 2.8 mm)

High-side or low-side current sensing
Operates from a 1.7-V to 5.5-V power supply
Reports current, voltage and power
Programmable full scale range: 20mV / 80mV
Input common mode range: –0.3 V to 48 V
Current monitoring accuracy:
- 16-bit ADC resolution
- 0.1% gain error (maximum)
- 5-µV offset (maximum)
Low input bias current: 10 nA (maximum)
Configurable averaging options
General call addressing allows conversion synchronization among devices
Alert limits for over and under current events
1.2-V compliant I 2C, SMBus interface
Two device address options with a 4-pin selectable address
DSBGA-8 Package (0.745 mm × 1.508 mm)
SOT23-8 Package
Operating temperature: –40°C and +125°C

High-side or low-side current sensing
Operates from a 1.7-V to 5.5-V power supply
Reports current, voltage and power
Programmable full scale range: 20mV / 80mV
Input common mode range: –0.3 V to 48 V
Current monitoring accuracy:
- 16-bit ADC resolution
- 0.1% gain error (maximum)
- 5-µV offset (maximum)
Low input bias current: 10 nA (maximum)
Configurable averaging options
General call addressing allows conversion synchronization among devices
Alert limits for over and under current events
1.2-V compliant I 2C, SMBus interface
Two device address options with a 4-pin selectable address
DSBGA-8 Package (0.745 mm × 1.508 mm)
SOT23-8 Package
Operating temperature: –40°C and +125°C

The INA236 device is a 16-bit digital current monitor with an I 2C/SMBus-compatible interface that is compliant with a wide range of digital bus voltages such as 1.2 V, 1.8 V, 3.3 V, and 5.0 V. The device monitors the voltage across an external sense resistor and reports values for current, bus voltage, and power.

The INA236 features programmable ADC conversion times and averaging. The device also has a programmable calibration value with an internal multiplier that enables direct readouts of current in amperes and power in watts. The device monitors the bus voltage present on the IN– pin and can alert on overcurent and undercurrent conditions as well as overvoltage and undervoltage conditions. High input impedance while in current measurement mode allows use of larger current sense resistors needed to measure small value system currents.

The INA236 senses current on common-mode bus voltages that can vary from –0.3 V to 48 V, independent of the supply voltage. The device operates from a single 1.7-V to 5.5-V supply, drawing a typical supply current of 300 µA in normal operation. The device can be placed in a low-power standby mode where the typical operating current is 2.2 µA.

The INA236 device is a 16-bit digital current monitor with an I 2C/SMBus-compatible interface that is compliant with a wide range of digital bus voltages such as 1.2 V, 1.8 V, 3.3 V, and 5.0 V. The device monitors the voltage across an external sense resistor and reports values for current, bus voltage, and power.

The INA236 features programmable ADC conversion times and averaging. The device also has a programmable calibration value with an internal multiplier that enables direct readouts of current in amperes and power in watts. The device monitors the bus voltage present on the IN– pin and can alert on overcurent and undercurrent conditions as well as overvoltage and undervoltage conditions. High input impedance while in current measurement mode allows use of larger current sense resistors needed to measure small value system currents.

The INA236 senses current on common-mode bus voltages that can vary from –0.3 V to 48 V, independent of the supply voltage. The device operates from a single 1.7-V to 5.5-V supply, drawing a typical supply current of 300 µA in normal operation. The device can be placed in a low-power standby mode where the typical operating current is 2.2 µA.

filter

Andere Digitale Leistungsmonitore suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 7

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	INA236 48-V, 16-Bit, Ultra-Precise, Current, Voltage, and Power Monitor With an I2C Interface datasheet (Rev. D)	PDF \| HTML	14.08.2023
	Anwendungshinweis	Using a PCB Copper Trace as a Current Sense Shunt Resistor (Rev. A)	PDF \| HTML	27.04.2026
	Anwendungshinweis	Closed Loop Constant Power Drive to Simplify Heater Element Control and Extend Battery Life	PDF \| HTML	29.01.2025
	Anwendungshinweis	Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers	PDF \| HTML	18.11.2024
	Anwendungshinweis	Digital Interfaces for Current Sensing Devices (Rev. A)	PDF \| HTML	30.09.2021
	Anwendungshinweis	Getting Started with Digital Power Monitors (Rev. A)	PDF \| HTML	02.09.2021
	Zertifikat	INA236EVM EU RoHS Declaration of Conformity (DoC)		01.06.2021

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

INA234_236EVM — Evaluierungsmodul INA232, INA234 und INA236 für Strom-/Spannungs-/Leistungsmonitore

Dieses Evaluierungsmodul (EVM) ist eine benutzerfreundliche Plattform zum Evaluieren der Hauptfunktionen und der Leistung des INA232, INA234 oder INA236. Das EVM verfügt über GUI-Unterstützung zum Lesen und Schreiben von Bausteinregister.

Benutzerhandbuch: PDF | HTML