Home Verstärker Strommessverstärker Digitale Leistungsmonitore
Home
Verstärker
Strommessverstärker
Digitale Leistungsmonitore

INA239-Q1

AKTIV

AEC-Q100 Hochpräziser 16-Bit-SPI-Ausgangsstrom-/Spannungs-/Leistungs-Monitor für 85 V

Jetzt bestellen
Datenblatt

INA239-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Common-mode voltage (max) (V) 85 Common-mode voltage (min) (V) -0.3 Digital interface SPI Resolution (Bits) 16 Input offset (±) (max) (µV) 5, 10 Input offset drift (±) (max) (µV/°C) 0.02, 0.1 Input offset drift (±) (typ) (µV/°C) 0.1 Voltage gain (V/V) 1 CMRR (min) (dB) 126 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.7 Iq (max) (mA) 1.2 Gain error (%) 0.1 Gain error drift (±) (max) (ppm/°C) 25 Features Alert Function, Bidirectional, Digital Temp Monitor, High precision, Integrated Power Monitor, Low-side Capable, SPI Number of channels 1 Power measurement accuracy (%) 0.2 TI functional safety category Functional Safety-Capable Rating Automotive Operating temperature range (°C) -40 to 125
Common-mode voltage (max) (V) 85 Common-mode voltage (min) (V) -0.3 Digital interface SPI Resolution (Bits) 16 Input offset (±) (max) (µV) 5, 10 Input offset drift (±) (max) (µV/°C) 0.02, 0.1 Input offset drift (±) (typ) (µV/°C) 0.1 Voltage gain (V/V) 1 CMRR (min) (dB) 126 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.7 Iq (max) (mA) 1.2 Gain error (%) 0.1 Gain error drift (±) (max) (ppm/°C) 25 Features Alert Function, Bidirectional, Digital Temp Monitor, High precision, Integrated Power Monitor, Low-side Capable, SPI Number of channels 1 Power measurement accuracy (%) 0.2 TI functional safety category Functional Safety-Capable Rating Automotive Operating temperature range (°C) -40 to 125
VSSOP (DGS) 10 14.7 mm² 3 x 4.9
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • High-resolution, 16-bit delta-sigma ADC
  • Current monitoring accuracy:
    • Offset voltage: ±5 µV (maximum)
    • Offset drift: ±0.02 µV/°C (maximum)
    • Gain error: ±0.1% (maximum)
    • Gain error drift: ±25 ppm/°C (maximum)
    • Common mode rejection: 140 dB (minimum)
  • Power monitoring accuracy:
    • 0.7% full scale, –40°C to +125°C (maximum)
  • Fast alert response: 75 µs
  • Wide common-mode range: –0.3 V to +85 V
  • Bus voltage sense input: 0 V to 85 V
  • Shunt full-scale differential range: ±163.84 mV / ±40.96 mV
  • Input bias current: 2.5 nA (maximum)
  • Temperature sensor: ±1°C (maximum at 25°C)
  • Programmable conversion time and averaging
  • 10-MHz SPI communication interface
  • Operates from a 2.7-V to 5.5-V supply:
    • Operational current: 640 µA (typical)
    • Shutdown current: 5 µA (maximum)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • High-resolution, 16-bit delta-sigma ADC
  • Current monitoring accuracy:
    • Offset voltage: ±5 µV (maximum)
    • Offset drift: ±0.02 µV/°C (maximum)
    • Gain error: ±0.1% (maximum)
    • Gain error drift: ±25 ppm/°C (maximum)
    • Common mode rejection: 140 dB (minimum)
  • Power monitoring accuracy:
    • 0.7% full scale, –40°C to +125°C (maximum)
  • Fast alert response: 75 µs
  • Wide common-mode range: –0.3 V to +85 V
  • Bus voltage sense input: 0 V to 85 V
  • Shunt full-scale differential range: ±163.84 mV / ±40.96 mV
  • Input bias current: 2.5 nA (maximum)
  • Temperature sensor: ±1°C (maximum at 25°C)
  • Programmable conversion time and averaging
  • 10-MHz SPI communication interface
  • Operates from a 2.7-V to 5.5-V supply:
    • Operational current: 640 µA (typical)
    • Shutdown current: 5 µA (maximum)

The INA239-Q1 is an ultra-precise digital power monitor with a 16-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84 mV or ±40.96 mV across a resistive shunt sense element with common-mode voltage support from –0.3 V to +85 V.

The INA239-Q1 reports current, bus voltage, temperature, and power, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature.

The low offset and gain drift design of the INA239-Q1 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in A to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger current-sense resistors, thus providing accurate current measurements in the micro-amp range.

The device allows for selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.

The INA239-Q1 is an ultra-precise digital power monitor with a 16-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84 mV or ±40.96 mV across a resistive shunt sense element with common-mode voltage support from –0.3 V to +85 V.

The INA239-Q1 reports current, bus voltage, temperature, and power, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature.

The low offset and gain drift design of the INA239-Q1 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in A to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger current-sense resistors, thus providing accurate current measurements in the micro-amp range.

The device allows for selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.
filter Andere Digitale Leistungsmonitore suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität
INA229-Q1 AKTIV AEC-Q100 Ultrapräziser 20-Bit-SPI-Ausgangsstrom-/Spannungs-/Leistungs-/Energie-/Ladestand-Monitor fü The INA229 has the additional functionality combined with improved performance
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
INA238-Q1 AKTIV AEC-Q100 Hochpräziser 16-Bit-I²C-Ausgangsstrom-/Spannungs-/Ladestand-Monitor für 85 V The INA238 has the same functionality and performance but with an I2C interface

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 9
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet INA239-Q1 AEC-Q100, 85-V, 16-Bit, High-Precision Power Monitor With SPI Interface datasheet (Rev. A) PDF | HTML 29 Jun 2021
Application note Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers PDF | HTML 18 Nov 2024
Application note Using a PCB Copper Trace as a Current-Sense Shunt Resistor PDF | HTML 25 Jan 2022
Application note Digital Interfaces for Current Sensing Devices (Rev. A) PDF | HTML 30 Sep 2021
Application brief Integrating the Current Sensing Signal Path (Rev. B) PDF | HTML 29 Sep 2021
Application brief Integrated, Current Sensing Analog-to-Digital Converter (Rev. A) PDF | HTML 28 Sep 2021
Application note Getting Started with Digital Power Monitors (Rev. A) PDF | HTML 02 Sep 2021
Application brief Shunt-Based Current-Sensing Solutions for BMS Applications in HEVs and EVs (Rev. B) PDF | HTML 02 Feb 2021
Functional safety information INA2x9-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA 17 Jul 2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

INA229_239EVM — Evaluierungsmodul für INA229 und INA239

Dieses Evaluierungsmodul (EVM) ist eine benutzerfreundliche Plattform zum Evaluieren der Hauptfunktionen und der Leistung des INA229 oder INA239.

Das EVM unterstützt Strommessungen bis zu 10 A und verfügt über eine grafische Benutzeroberfläche (GUI) zum Lesen und Schreiben in Geräteregister.

Benutzerhandbuch: PDF | HTML
View Options
IDE, Konfiguration, Compiler oder Debugger

ASC-STUDIO-INA239 — ASC studio (SysConfig) for configuring all aspects of the INA239 current sensor

SysConfig can be used to help simplify configuration challenges and accelerate software development with the INA239 current sensor.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start
Berechnungstool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start Herunterladen
Berechnungstool

CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool

This Excel calculator provides a comparison between two and five of our standard current sense amplifiers, delivering a chart containing the basic parameters of each device. This calculator also takes system condition inputs from users such as common-mode voltage, supply voltage, shunt resistor (...)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Berechnungstool

SBOR021 — Power Monitor Tool

Power Monitor Tool
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese Design- und Simulationssuite mit vollem Funktionsumfang verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VSSOP (DGS) 10 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos