Home Verstärker Operationsverstärker (OpAmps) Präzisionsoperationsverstärker (Vos < 1 mV)
Home
Verstärker
Operationsverstärker (OpAmps)
Präzisionsoperationsverstärker (Vos < 1 mV)

OPA4277-SP

AKTIV

Hoch-Präzisions-Operationsverstärker

Jetzt bestellen
Datenblatt

Eine neuere Version dieses Produkts ist verfügbar

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
OPA4H199-SP AKTIV Weltraumtauglicher Vierfach-Operationsverstärker, 40 V 4,5 MHz, Rail-to-Rail-Eingang und -Ausgang Wider supply voltage and RRIO, with lower bias current; and wider offset voltage

OPA4277-SP

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4 Vos (offset voltage at 25°C) (max) (mV) 0.065 Offset drift (typ) (µV/°C) 0.15 Input bias current (max) (pA) 17500 GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 0.8 Rail-to-rail No Iq per channel (typ) (mA) 0.79 Vn at 1 kHz (typ) (nV√Hz) 8 CMRR (typ) (dB) 140 Rating Catalog, Space Operating temperature range (°C) -55 to 125 Iout (typ) (A) 0.035 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 2 Input common mode headroom (to positive supply) (typ) (V) -2 Output swing headroom (to negative supply) (typ) (V) 0.5 Output swing headroom (to positive supply) (typ) (V) -1.2 THD + N at 1 kHz (typ) (%) 0.002
Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4 Vos (offset voltage at 25°C) (max) (mV) 0.065 Offset drift (typ) (µV/°C) 0.15 Input bias current (max) (pA) 17500 GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 0.8 Rail-to-rail No Iq per channel (typ) (mA) 0.79 Vn at 1 kHz (typ) (nV√Hz) 8 CMRR (typ) (dB) 140 Rating Catalog, Space Operating temperature range (°C) -55 to 125 Iout (typ) (A) 0.035 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 2 Input common mode headroom (to positive supply) (typ) (V) -2 Output swing headroom (to negative supply) (typ) (V) 0.5 Output swing headroom (to positive supply) (typ) (V) -1.2 THD + N at 1 kHz (typ) (%) 0.002
CDIP_SB (JDJ) 28 266.3444 mm² 35.56 x 7.49 CFP (HFR) 14 97.75 mm² 11.5 x 8.5 DIESALE (KGD) — See data sheet
  • QMLV qualified: 5962-16209
    • Radiation hardness assurance (RHA) up to total ionizing dose (TID) 50krad(Si)
    • ELDRS-Free (See Radiation Report)
    • Single event latch-up (SEL) Immune to LET = 85MeV-cm2/mg
  • Ultra-low offset voltage: 20µV (typical)
  • Ultra-low drift: ±0.15µV/°C (typical)
  • High open-loop gain: 134dB (typical)
  • High common-mode rejection: 140dB (typical)
  • High power-supply rejection: 130dB (typical)
  • Wide supply range: ±2V to ±18V
  • Low quiescent current: 790µA/amplifier (typical)
  • Available in 14-lead CFP with industry-standard, quad-op-amp pinout
  • QMLV qualified: 5962-16209
    • Radiation hardness assurance (RHA) up to total ionizing dose (TID) 50krad(Si)
    • ELDRS-Free (See Radiation Report)
    • Single event latch-up (SEL) Immune to LET = 85MeV-cm2/mg
  • Ultra-low offset voltage: 20µV (typical)
  • Ultra-low drift: ±0.15µV/°C (typical)
  • High open-loop gain: 134dB (typical)
  • High common-mode rejection: 140dB (typical)
  • High power-supply rejection: 130dB (typical)
  • Wide supply range: ±2V to ±18V
  • Low quiescent current: 790µA/amplifier (typical)
  • Available in 14-lead CFP with industry-standard, quad-op-amp pinout

The OPA4277-SP precision operational amplifier replaces the industry standard LM124-SP. The OPA4277‑SP offers improved noise and two orders of magnitude lower input offset voltage. Features include ultra-low offset voltage and drift, low-bias current, high common-mode rejection, and high power-supply rejection.

The OPA4277-SP operates from ±2V to ±18V supplies with excellent performance. Unlike most operational amplifiers that are specified at only one supply voltage, the OPA4277-SP precision operational amplifier is specified for real-world applications; a single limit applies over the ±5V to ±15V supply range. High performance is maintained as the amplifier swings to the specified limits.

The OPA4277-SP is easy to use and free from phase inversion and overload problems found in some operational amplifiers. The device is stable in unity gain and provides excellent dynamic behavior over a wide range of load conditions. The OPA4277-SP features completely independent circuitry for lowest crosstalk and freedom from interaction, even when overdriven or overloaded.

The OPA4277-SP precision operational amplifier replaces the industry standard LM124-SP. The OPA4277‑SP offers improved noise and two orders of magnitude lower input offset voltage. Features include ultra-low offset voltage and drift, low-bias current, high common-mode rejection, and high power-supply rejection.

The OPA4277-SP operates from ±2V to ±18V supplies with excellent performance. Unlike most operational amplifiers that are specified at only one supply voltage, the OPA4277-SP precision operational amplifier is specified for real-world applications; a single limit applies over the ±5V to ±15V supply range. High performance is maintained as the amplifier swings to the specified limits.

The OPA4277-SP is easy to use and free from phase inversion and overload problems found in some operational amplifiers. The device is stable in unity gain and provides excellent dynamic behavior over a wide range of load conditions. The OPA4277-SP features completely independent circuitry for lowest crosstalk and freedom from interaction, even when overdriven or overloaded.
filter Andere Präzisionsoperationsverstärker (Vos < 1 mV) suchen
Herunterladen

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
OPA4H014-SEP AKTIV Strahlungstoleranter, Präzisions-Ausgangs-Rail-to-Rail-JFET-Verstärker, 11 MHz Plastic Rad Hard with Vs max= 18V supply with improved bias current and wider bandwidth.
OPA4H199-SEP AKTIV Raumfahrt-Produkt, Vierfach-Operationsverstärker 40 V, 4,5 MHz, Rail-To-Rail-Eingang/Ausgang Plastic Radiation Hardened Package, with wider power supply range with limited DC performance.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet OPA4277-SP Radiation-Hardened, High-Precision Operational Amplifier datasheet (Rev. C) PDF | HTML 22 Okt 2025
* Radiation & reliability report Single-Event Effects Test Report for OPA4277-SP High-Precision Operational Ampli 10 Apr 2018
* Radiation & reliability report OPA4277-SP Total Ionizing Dose (TID) Radiation Report 05 Mär 2018

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​