Home Datenwandler Analog-Digital-Wandler (ADCs) Präzisions-ADCs
Home
Datenwandler
Analog-Digital-Wandler (ADCs)
Präzisions-ADCs

ADS131M03-Q1

AKTIV

Für die Automobilindustrie, drei Kanäle, 24 Bit, 64 kSPS, simultane Abtastung, Delta-Sigma-ADC

Jetzt bestellen
Datenblatt

ADS131M03-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Resolution (Bits) 24 Sample rate (max) (ksps) 64 Number of input channels 3 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Simultaneous Sampling Rating Automotive TI functional safety category Functional Safety-Capable Reference mode Internal Input voltage range (max) (V) 3.6 Input voltage range (min) (V) -1.3 Features PGA, Small Size Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 2.7 Analog supply voltage (min) (V) 2.7 Analog supply voltage (max) (V) 3.6 SNR (dB) 100 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
Resolution (Bits) 24 Sample rate (max) (ksps) 64 Number of input channels 3 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Simultaneous Sampling Rating Automotive TI functional safety category Functional Safety-Capable Reference mode Internal Input voltage range (max) (V) 3.6 Input voltage range (min) (V) -1.3 Features PGA, Small Size Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 2.7 Analog supply voltage (min) (V) 2.7 Analog supply voltage (max) (V) 3.6 SNR (dB) 100 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
TSSOP (PW) 20 41.6 mm² 6.5 x 6.4
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • 3 simultaneously sampling differential inputs
  • Programmable data rate up to 64 kSPS
  • Programmable gain up to 128
  • Noise performance:
    • 102-dB dynamic range at gain = 1, 4 kSPS
    • 80-dB dynamic range at gain = 64, 4 kSPS
  • Total harmonic distortion: –100 dB
  • High-impedance inputs for direct sensor connection:
    • 330-kΩ input impedance for gains of 1, 2, and 4
    • ≥ 1-MΩ input impedance for gains of 8, 16, 32, 64, and 128
  • Programmable channel-to-channel phase delay calibration:
    • Resolution = 244 ns, fCLKIN = 8.192 MHz
  • Fast start-up: First data within 0.5 ms of supply ramp
  • Integrated negative charge pump allows input signals below ground
  • Crosstalk between channels: –120 dB
  • Low-drift internal voltage reference
  • Cyclic redundancy check (CRC) on communications and register map
  • Analog and digital supplies: 2.7 V to 3.6 V
  • Low-power consumption: 3.6 mW at 3-V AVDD and DVDD
  • Package: 20-pin TSSOP
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • 3 simultaneously sampling differential inputs
  • Programmable data rate up to 64 kSPS
  • Programmable gain up to 128
  • Noise performance:
    • 102-dB dynamic range at gain = 1, 4 kSPS
    • 80-dB dynamic range at gain = 64, 4 kSPS
  • Total harmonic distortion: –100 dB
  • High-impedance inputs for direct sensor connection:
    • 330-kΩ input impedance for gains of 1, 2, and 4
    • ≥ 1-MΩ input impedance for gains of 8, 16, 32, 64, and 128
  • Programmable channel-to-channel phase delay calibration:
    • Resolution = 244 ns, fCLKIN = 8.192 MHz
  • Fast start-up: First data within 0.5 ms of supply ramp
  • Integrated negative charge pump allows input signals below ground
  • Crosstalk between channels: –120 dB
  • Low-drift internal voltage reference
  • Cyclic redundancy check (CRC) on communications and register map
  • Analog and digital supplies: 2.7 V to 3.6 V
  • Low-power consumption: 3.6 mW at 3-V AVDD and DVDD
  • Package: 20-pin TSSOP

The ADS131M03-Q1 is a three-channel, simultaneously sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital converter (ADC) that offers wide dynamic range and low power, making the device designed for automotive battery management systems (BMS). The ADC inputs can be directly interfaced to shunt resistors for bidirectional battery-current measurements, to resistor-divider networks for high-voltage measurements, or to temperature sensors (such as thermistors or analog output temperature sensors).

The individual ADC channels can be independently configured depending on the sensor input. A low-noise, programmable gain amplifier (PGA) provides gains ranging from 1 to 128 to amplify low-level signals. Additionally, this device integrates channel-to-channel phase calibration and offset and gain calibration registers to help remove signal-chain errors.

A low-drift, 1.2-V reference is integrated into the device reducing printed circuit board (PCB) area. Optional cyclic redundancy checks (CRCs) on the data input, data output, and register map maintain communication integrity.

The complete analog front-end (AFE) is offered in a 20-pin TSSOP package and is specified over the automotive temperature range of –40°C to +125°C.

The ADS131M03-Q1 is a three-channel, simultaneously sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital converter (ADC) that offers wide dynamic range and low power, making the device designed for automotive battery management systems (BMS). The ADC inputs can be directly interfaced to shunt resistors for bidirectional battery-current measurements, to resistor-divider networks for high-voltage measurements, or to temperature sensors (such as thermistors or analog output temperature sensors).

The individual ADC channels can be independently configured depending on the sensor input. A low-noise, programmable gain amplifier (PGA) provides gains ranging from 1 to 128 to amplify low-level signals. Additionally, this device integrates channel-to-channel phase calibration and offset and gain calibration registers to help remove signal-chain errors.

A low-drift, 1.2-V reference is integrated into the device reducing printed circuit board (PCB) area. Optional cyclic redundancy checks (CRCs) on the data input, data output, and register map maintain communication integrity.

The complete analog front-end (AFE) is offered in a 20-pin TSSOP package and is specified over the automotive temperature range of –40°C to +125°C.
filter Andere Präzisions-ADCs suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
ADS131M02-Q1 AKTIV Simultan abtastender Delta-Sigma A/D-Wandler, zwei Kanäle, 24, Bit 64 kSPS, für die Automobilindustr 2-channel version
ADS131M03 AKTIV 24-Bit, 64-kSPS, 3-Kanal, simultanabtastender Delta-Sigma A/D-Wandler Industrial version
ADS131M04-Q1 AKTIV 4-Kanal, simultanabtastender Delta-Sigma A/D-Wandler, 24 Bit, 64 kSPS (Automobilindustrie) 4-channel version
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
ADS131M06-Q1 AKTIV Für die Automobilindustrie, sechs Kanäle, 24 Bit, 32 kSPS, simultane Abtastung, Delta-Sigma-ADC 6-channel version
ADS131M08-Q1 AKTIV 8-Kanal, 24-Bit, 32-kSPS, simultane Abtastung, Delta-Sigma-ADC (Automobilindustrie) 8-channel version

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet ADS131M03-Q1 Automotive, 3-Channel, 64-kSPS, Simultaneous-Sampling, 24-Bit, Delta-Sigma ADC datasheet PDF | HTML 10 Aug 2022
Application note Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 29 Mär 2023
Functional safety information ADS131M03-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 14 Jun 2022
More literature Addressing BMS Battery Pack Current and Voltage Measurement Requirements 05 Mai 2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

ADS131M04EVM — 24-Bit, 64-kSPS, 4-Kanal, simultanabtastender Delta-Sigma A/D-Wandler für die Automobilindustrie

Das ADS131M04-Evaluierungsmodul (EVM) ist eine Plattform zur Evaluierung des ADS131M04, eines energieeffizienten Delta-Sigma-Analog-Digital-Wandlers (ADC) mit simultaner Abtastung.

Das ADS131M04EVM-Kit enthält die ADS131M04EVM-Platine und die Precision Host Interface (PHI)-Controllerplatine, welche (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Support-Software

ADS131M08-C-EXAMPLE-CODE — ADS131M08 example C code

Expedite your embedded design using this example C code for the ADS131M08 product family
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Simulationsmodell

ADS131M02/03/04 IBIS model (Rev. A)

SBAM423A.IBS (314 KB) - IBIS Model
Herunterladen
Berechnungstool

ADC-DESIGN-CALC — Online design calculator tool for TI Precision ADCs

ADC-DESIGN-CALC is an online resource with multiple ADC calculator tools (such as Digital Filter Response, Code-to-Voltage, CMR, CRC, etc.) for TI Precision ADCs.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start
Berechnungstool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start Herunterladen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese Design- und Simulationssuite mit vollem Funktionsumfang verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TSSOP (PW) 20 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos