LMX2572LPEVM
具有 FSK 調變的 2 GHz 低功耗寬頻射頻合成器評估模組
LMX2572LPEVM
概覽
此評估模組 (EVM) 適用於 LMX2572LP,這是一款低功耗高性能寬頻合成器,無需使用內部倍頻器,即可產生 12.5MHz 至 2GHz 的任何頻率。PLL 可提供絕佳性能,同時只需單一 3.3-V 電源的 70mA 即可實現。透過提供 SYNC 訊號,使用者可在多個 LMX2572LP 裝置中同步輸出相位。LMX2572LP 可產生頻率斜坡,可在此評估模組中示範。此外,LMX2572LP 支援直接數位 FSK 調變。可為此目的將序列介面配置為 SPI 或 I2S 介面。配套的 Refernce PRO 模組用於提供乾淨的參考時鐘,以及對 LMX2572LP 評估模組進行編程。
特點
- 12.5-MHz 至 2-GHz 輸出頻率
- 800-MHz 載波,100-kHz 偏移處相位雜訊為 -124 dBc/Hz
- 70-mA 運作電流,含一個直接 VCO 輸出
- 兩個差動輸出搭配可編程輸出功率
- 此 EVM 具有用於合成器的完整電路,已針對性能進行最佳化與測試,並且包含 USB 編程模組
參考 PRO (SV601349) IDC 纜線 (M3DDA-1006J) USB 纜線 (Q362-ND) 2x SMA 轉接器 (132168)
RF PLL 與合成器
開始使用
- 訂購 LMX2572LPEVM
- 下載並安裝 TICSPRO-SW 和 PLLATINUMSIM-SW
- 閱讀 LMX2572LPEVM 使用指南
- 在 TICSPRO-SW 上配置暫存器,在 PLLATINUMSIM-SW 上模擬性能
訂購並開始開發
開發板
LMX2572LPEVM — 2-GHz Low Power Wideband RF Synthesizer with FSK Modulation Evaluation Module
LMX2572LPEVM — 2-GHz Low Power Wideband RF Synthesizer with FSK Modulation Evaluation Module
支援軟體
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
支援產品和硬體
產品
RF PLL 與合成器
半導體
振盪器
時脈網路同步器
時鐘抖動清除器
時鐘產生器
時鐘緩衝器
硬體開發
開發板
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.10.1 installer binary for Windows operating system
產品
RF PLL 與合成器
半導體
振盪器
時脈網路同步器
時鐘抖動清除器
時鐘產生器
時鐘緩衝器
硬體開發
開發板
文件
TICS Pro 1.7.10.1 Software Manifest
TICS Pro 1.7.10.1 Release Notes
版本資訊
v1.7.10.1 contains a bugfix for ReadAllRegisters API introduced in v1.7.10.0, and replaces v1.7.10.0.
Devices
- Added LMK5D33414
Improvements
- See release notes for complete list of updates
- APIs for GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro added
- ReadAllRegisters API returns values
Bugfixes
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
Known Issues
- LMK5B and LMK5C family - In some cases, "Assign Selected VCO Settings to Device" and "Apply Output Clock Settings to Device" may need to be pressed twice for certain cascaded configurations to display correctly
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
新功能
- Added new APIs: GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro
- ReadAllRegisters API returns values
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
- Added LMK5D33414
技術文件
=
TI 所選的重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | EVM User's guide | LMX2572LPEVM Evaluation Instructions | 2018/5/24 | |||
| 證書 | LMX2572LPEVM EU Declaration of Conformity (DoC) | 2019/1/2 |