首頁 射頻 (RF) 與微波 RF PLL 與合成器
首頁
射頻 (RF) 與微波
RF PLL 與合成器
最新

LMX1404-EP

現行

具有 SYSREF (支援 JESD204B/C) 和 FPGA 時脈的 15GHz 緩衝器/倍頻器/分頻器

立即訂購
產品規格表

LMX1404-EP

現行
產品規格表 立即訂購

產品詳細資料

Frequency (max) (MHz) 15000 Frequency (min) (MHz) 300 Features Enhanced Product, Integrated multiplier and divider modes, JESD204B/C SYSREF support, Phase synchronization, RF clock distribution, Ultra-low additive jitter Current consumption (mA) 405 Integrated VCO No Operating temperature range (°C) -55 to 125 Rating HiRel Enhanced Product Lock time (µs) (typ) (s) Loop BW dependent
Frequency (max) (MHz) 15000 Frequency (min) (MHz) 300 Features Enhanced Product, Integrated multiplier and divider modes, JESD204B/C SYSREF support, Phase synchronization, RF clock distribution, Ultra-low additive jitter Current consumption (mA) 405 Integrated VCO No Operating temperature range (°C) -55 to 125 Rating HiRel Enhanced Product Lock time (µs) (typ) (s) Loop BW dependent
HTQFP (PAP) 64 144 mm² (12 mm × 12 mm)
  • VID #V62/24627
  • Clock buffer for 300MHz to 15GHz frequency
  • Ultra-Low Noise
    • Noise floor of –159dBc/Hz at 6GHz output
    • 36-fs additive jitter (100Hz to fCLK) at 6GHz output
    • 5fs additive jitter (100Hz - 100MHz)
  • 4 high-frequency clocks with corresponding SYSREF outputs
    • Shared divide by 1 (Buffer), 2, 3, 4, 5, 6, 7, and 8
    • Shared programmable multiplier x2, x3, and x4
  • Support pin mode options to configure the device without SPI
  • LOGICLK output with corresponding SYSREF output
    • On separate divide bank
    • 1, 2, 4 pre-divider
    • 1 (bypass), 2, …, 1023 post divider
  • 8 programmable output power levels
  • Synchronized SYSREF clock outputs
    • 508 delay step adjustments of less than 2.5ps each at 12.8GHz
    • Generator and repeater modes
    • Windowing feature for SYSREFREQ pins to optimize timing
  • SYNC feature to all divides and multiple devices
  • 2.5V operating voltage
  • –55ºC to 125ºC operating temperature
  • High Reliability
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Extended Product Life Cycle
    • Product Traceability
  • VID #V62/24627
  • Clock buffer for 300MHz to 15GHz frequency
  • Ultra-Low Noise
    • Noise floor of –159dBc/Hz at 6GHz output
    • 36-fs additive jitter (100Hz to fCLK) at 6GHz output
    • 5fs additive jitter (100Hz - 100MHz)
  • 4 high-frequency clocks with corresponding SYSREF outputs
    • Shared divide by 1 (Buffer), 2, 3, 4, 5, 6, 7, and 8
    • Shared programmable multiplier x2, x3, and x4
  • Support pin mode options to configure the device without SPI
  • LOGICLK output with corresponding SYSREF output
    • On separate divide bank
    • 1, 2, 4 pre-divider
    • 1 (bypass), 2, …, 1023 post divider
  • 8 programmable output power levels
  • Synchronized SYSREF clock outputs
    • 508 delay step adjustments of less than 2.5ps each at 12.8GHz
    • Generator and repeater modes
    • Windowing feature for SYSREFREQ pins to optimize timing
  • SYNC feature to all divides and multiple devices
  • 2.5V operating voltage
  • –55ºC to 125ºC operating temperature
  • High Reliability
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Extended Product Life Cycle
    • Product Traceability

The LMX1404-EP is an buffer, divider and multiplier that features high frequency, ultra-low jitter, and SYSREF outputs. This device combined with an ultra-low noise reference clock source is an exemplary design for clocking data converters, especially when sampling above 3GHz. Each of the 4 high frequency clock outputs and additional LOGICLK output is paired with a SYSREF output clock signal. The SYSREF signal for JESD interfaces can either be internally generated or passed in as an input and re-clocked to the device clocks. This device can distribute the multichannel, low skew, ultra-low noise local oscillator signals to multiple mixers by disabling the SYSREF outputs.

The LMX1404-EP is an buffer, divider and multiplier that features high frequency, ultra-low jitter, and SYSREF outputs. This device combined with an ultra-low noise reference clock source is an exemplary design for clocking data converters, especially when sampling above 3GHz. Each of the 4 high frequency clock outputs and additional LOGICLK output is paired with a SYSREF output clock signal. The SYSREF signal for JESD interfaces can either be internally generated or passed in as an input and re-clocked to the device clocks. This device can distribute the multichannel, low skew, ultra-low noise local oscillator signals to multiple mixers by disabling the SYSREF outputs.
filter 尋找其它 RF PLL 與合成器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
LMX2694-EP 現行 具有相位同步功能的強化型產品 15 GHz 射頻合成器 Up to 15GHz synthesizer and JESD support
LMK04368-EP 現行 增強型產品超低雜訊 3.2-GHz JESD204C 抖動清除器 With JESD204 plus additional jitter cleaner and lower frequency
LMX1204 現行 具 JESD204B/C SYSREF 支援和相位同步的 12.8 GHz RF 緩衝器、倍頻器和分頻器 Lower temperature range and smaller package

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LMX1404-EP Low-Noise, High-Frequency JESD204B/C Buffer, Multiplier and Divider datasheet (Rev. A) PDF | HTML 2025/6/2
應用說明 Practical Clocking Considerations That Give Your Next High-Speed Converter Design an Edge (Rev. A) PDF | HTML 2025/4/11
證書 LMX1404EPEVM EU Declaration of Conformity (DoC) 2024/3/4

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMX1404EPEVM — LMX1404-EP 評估模組

LMX1404-EP 評估模組 (EVM) 設計旨在評估 LMX1404-EP 的性能，其為四路輸出、超低附加抖動無線電頻率 (RF) 緩衝器、分頻器和倍頻器。此 EVM 可緩衝最多 15GHz 的射頻時鐘輸入，在 3.2GHz 至 6.4GHz 的輸出範圍內乘以 x2、x3 或 x4，並將輸入除最多八。

可程式設計邏輯閘陣列 (FPGA) 和邏輯時鐘中隨附獨立的輔助時鐘分頻器，而每個輸出均包含具皮秒精度及延遲微調功能的系統參考 (SYSREF) 補數。多個裝置可針對廣泛的時鐘分配樹狀結構進行同步化。

使用指南: PDF | HTML
支援產品和硬體
支援軟體

TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices

德州儀器 (TI) 的時鐘及合成器 (TICS) 專業級軟體用於編程具有以下前置字元的產品編號的評估模組 (EVM)：CDC、LMK 和 LMX。這些產品包括鎖相迴路及電壓控制振盪器 (PLL+VCO)、合成器和時鐘裝置。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTQFP (PAP) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片