首頁 射頻 (RF) 與微波 RF PLL 與合成器
首頁
射頻 (RF) 與微波
RF PLL 與合成器

LMX2491

現行

具斜率/頻擾產生功能的 6.4-GHz 低雜訊分數 N PLL

立即訂購
產品規格表

LMX2491

現行
產品規格表 立即訂購

產品詳細資料

Frequency (max) (MHz) 6400 Frequency (min) (MHz) 500 Normalized PLL phase noise (dBc/Hz) -227 1/f noise (10-kHz offset at 1-GHz carrier) (dBc/Hz) -120 Features Flexible ramp generation, Wideband Current consumption (mA) 60 Integrated VCO No Operating temperature range (°C) -40 to 85 Rating Catalog Lock time (µs) (typ) (s) Loop BW dependent
Frequency (max) (MHz) 6400 Frequency (min) (MHz) 500 Normalized PLL phase noise (dBc/Hz) -227 1/f noise (10-kHz offset at 1-GHz carrier) (dBc/Hz) -120 Features Flexible ramp generation, Wideband Current consumption (mA) 60 Integrated VCO No Operating temperature range (°C) -40 to 85 Rating Catalog Lock time (µs) (typ) (s) Loop BW dependent
WQFN (RTW) 24 16 mm² 4 x 4
  • –227-dBc/Hz Normalized PLL Noise
  • 500-MHz to 6.4-GHz Wideband PLL
  • 3.15-V to 5.25-V Charge Pump PLL Supply
  • Versatile Ramp / Chirp Generation
  • 200-MHz Maximum Phase Detector Frequency
  • FSK / PSK Modulation Pin
  • Digital Lock Detect
  • Single 3.3-V Supply Capability
  • –227-dBc/Hz Normalized PLL Noise
  • 500-MHz to 6.4-GHz Wideband PLL
  • 3.15-V to 5.25-V Charge Pump PLL Supply
  • Versatile Ramp / Chirp Generation
  • 200-MHz Maximum Phase Detector Frequency
  • FSK / PSK Modulation Pin
  • Digital Lock Detect
  • Single 3.3-V Supply Capability

The LMX2491 device is a low-noise, 6.4-GHz wideband delta-sigma fractional N PLL with ramp and chirp generation. It consists of a phase frequency detector, programmable charge pump, and high frequency input for the external VCO. The LMX2491 supports a broad and flexible class of ramping capabilities, including FSK, PSK, and configurable piecewise linear FM modulation profiles of up to 8 segments. It supports fine PLL resolution and fast ramp with up to a 200-MHz phase detector rate. The LMX2491 allows any of its registers to be read back. The LMX2491 can operate with a single 3.3-V supply. Moreover, supporting up to 5.25-V charge pump can eliminate the need of external amplifier, leading to a simpler solution with improved phase noise performance.

The LMX2491 device is a low-noise, 6.4-GHz wideband delta-sigma fractional N PLL with ramp and chirp generation. It consists of a phase frequency detector, programmable charge pump, and high frequency input for the external VCO. The LMX2491 supports a broad and flexible class of ramping capabilities, including FSK, PSK, and configurable piecewise linear FM modulation profiles of up to 8 segments. It supports fine PLL resolution and fast ramp with up to a 200-MHz phase detector rate. The LMX2491 allows any of its registers to be read back. The LMX2491 can operate with a single 3.3-V supply. Moreover, supporting up to 5.25-V charge pump can eliminate the need of external amplifier, leading to a simpler solution with improved phase noise performance.
filter 尋找其它 RF PLL 與合成器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 日期
* Data sheet LMX2491 6.4-GHz Low Noise RF PLL With Ramp/Chirp Generation datasheet (Rev. A) PDF | HTML 2017年 1月 23日
Application note Sine to Square Wave Conversion Using Clock Buffers PDF | HTML 2024年 9月 3日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMX2492EVM — LMX2492 評估模組

The LMX2492EVM supports evaluation of the LMX2492 and LMX2492-Q1 which is an ultra-low noise 14 GHz wideband RF PLL with ramp/chirp generation, consisting of a delta-sigma fractional N PLL, phase detector, programmable 5V charge pump and high frequency divider for the VCO. The LMX2492 supports a (...)

使用指南: PDF
TI.com 無法提供
開發板

XMICR-3P-LMX2492 — LMX2492 X-MWblock 評估模組

X-MWblocks consist of RF and Microwave “Drop-In” components that can be used individually for prototyping or in production assemblies. X-MWblocks are easy to test, integrate, align, and configure to 60 GHz and beyond. No messy Sweat Soldering or Silver Epoxy processes are required. X-MWblocks are (...)

從：X-Microwave
造訪合作夥伴網站
支援軟體

TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices

Texas Instruments clocks and synthesizers (TICS) pro software is used to program the evaluation modules (EVMs) for product numbers with these prefixes: CDC, LMK and LMX. These products include phase-locked loops and voltage-controlled oscillators (PLL+VCO), synthesizers and clocking devices.

支援產品和硬體

支援產品和硬體
下載選項
設計工具

CLOCK-TREE-ARCHITECT — 時鐘樹架構程式設計軟體

時鐘樹架構是一款時鐘樹合成工具，可根據您的系統需求產生時鐘樹解決方案，進而簡化您的設計流程。此工具可從廣泛的計時產品資料庫中汲取資料，產生系統級多晶片計時解決方案。
立即進行設計
設計工具

PLLATINUMSIM-SW — PLL loop filter, phase noise, lock time, and spur simulation tool

PLLATINUMSIM-SW is a simulation tool that allows users to create detailed designs and simulations of our PLLatinum™ integrated circuits, which include the LMX series of phase-locked loops (PLLs) and synthesizers.

支援產品和硬體

支援產品和硬體
下載選項
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTW) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片