產品詳細資料

Frequency (max) (MHz) 3800 Frequency (min) (MHz) 50 Normalized PLL phase noise (dBc/Hz) -229 1/f noise (10-kHz offset at 1-GHz carrier) (dBc/Hz) -125 Features Integrated VCO, Wideband Current consumption (mA) 178 Integrated VCO Yes Operating temperature range (°C) -40 to 85 Rating Catalog Lock time (µs) (typ) (s) 10
Frequency (max) (MHz) 3800 Frequency (min) (MHz) 50 Normalized PLL phase noise (dBc/Hz) -229 1/f noise (10-kHz offset at 1-GHz carrier) (dBc/Hz) -125 Features Integrated VCO, Wideband Current consumption (mA) 178 Integrated VCO Yes Operating temperature range (°C) -40 to 85 Rating Catalog Lock time (µs) (typ) (s) 10
WQFN (RTV) 32 25 mm² (5 mm × 5 mm)
  • Output Frequency from 50 to 3800 MHz
  • Input Clock Frequency up to 900 MHz
  • Phase Detector Frequency up to 200 MHz
  • Supports Fractional and Integer Modes
  • –229 dBc/Hz Normalized PLL Phase Noise
  • –120.8 dBc/Hz Normalized PLL 1/f Noise
  • –137 dBc/Hz VCO Phase Noise at 1 MHz offset
    for a 2.5 GHz Carrier
  • 100 fs RMS Jitter in Integer Mode
  • Programmable Fractional ModulatorOrder
  • Programmable Fractional Denominator
  • Programmable Output Power up to 12 dBm
  • Programmable 32 Level Charge Pump Current
  • Programmable Option to Use an External VCO
  • Digital Lock Detect
  • 3-Wire Serial Interface and Readback
  • Single Supply Voltage from 3.15 V to 3.45 V
  • Supports Logic Levels down to 1.6 V
  • Output Frequency from 50 to 3800 MHz
  • Input Clock Frequency up to 900 MHz
  • Phase Detector Frequency up to 200 MHz
  • Supports Fractional and Integer Modes
  • –229 dBc/Hz Normalized PLL Phase Noise
  • –120.8 dBc/Hz Normalized PLL 1/f Noise
  • –137 dBc/Hz VCO Phase Noise at 1 MHz offset
    for a 2.5 GHz Carrier
  • 100 fs RMS Jitter in Integer Mode
  • Programmable Fractional ModulatorOrder
  • Programmable Fractional Denominator
  • Programmable Output Power up to 12 dBm
  • Programmable 32 Level Charge Pump Current
  • Programmable Option to Use an External VCO
  • Digital Lock Detect
  • 3-Wire Serial Interface and Readback
  • Single Supply Voltage from 3.15 V to 3.45 V
  • Supports Logic Levels down to 1.6 V

The LMX2581E is a low-noise wideband frequency synthesizer that integrates a delta-sigma fractional N PLL, multiple core VCO, programmable output divider, and two differential output buffers. The VCO frequency range is from 1880 to 3800 MHz and can be sent directly to the output buffers or divided down by even values from 2 to 38. Each buffer is capable of output power from –3 to +12 dBm at 2700 MHz. Integrated low-noise LDOs are used for superior noise immunity and consistent performance.

This synthesizer is a highly programmable device and it enables the user to optimize its performance. In fractional mode, the denominator and the modulator order are programmable and can be configured with dithering as well. The user also has the ability to directly specify a VCO core or entirely bypass the internal VCO. Finally, many convenient features are included such as power down, Fastlock, auto mute, and lock detection. All registers can be programmed through a simple 3-wire interface and a read back feature is also available.

The LMX2581E operates on a single 3.3 V supply and comes in a 32 pin 5.0 mm × 5.0 mm WQFN package.

The LMX2581E is a low-noise wideband frequency synthesizer that integrates a delta-sigma fractional N PLL, multiple core VCO, programmable output divider, and two differential output buffers. The VCO frequency range is from 1880 to 3800 MHz and can be sent directly to the output buffers or divided down by even values from 2 to 38. Each buffer is capable of output power from –3 to +12 dBm at 2700 MHz. Integrated low-noise LDOs are used for superior noise immunity and consistent performance.

This synthesizer is a highly programmable device and it enables the user to optimize its performance. In fractional mode, the denominator and the modulator order are programmable and can be configured with dithering as well. The user also has the ability to directly specify a VCO core or entirely bypass the internal VCO. Finally, many convenient features are included such as power down, Fastlock, auto mute, and lock detection. All registers can be programmed through a simple 3-wire interface and a read back feature is also available.

The LMX2581E operates on a single 3.3 V supply and comes in a 32 pin 5.0 mm × 5.0 mm WQFN package.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LMX2581E Wideband Frequency Synthesizer with Integrated VCO datasheet PDF | HTML 2015/7/27

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMX2581EVM — LMX2581 評估模組

LMX2581 寬頻頻率合成器可產生各種頻率,且相位雜訊極低。LMX2581 參考電路板 (LMX2581EVM) 旨在輔助評估系統中的 LMX2581,同時當做客戶系統的參考設計。除參考電路板套件外,只需一台 PC 和相位雜訊分析器即可使用。此評估板可透過為配套使用而開發的 CodeLoader 進行評估和控制。CodeLoader 軟體能透過該裝置進行全面控制,同時還能由 Active X 透過程式 (如 Excel 和 Labview) 進行呼叫。此板的功能旨在獲得最大的靈活性和便利性。預設配置 XO (...)

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
支援軟體

TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices

德州儀器 (TI) 的時鐘及合成器 (TICS) 專業級軟體用於編程具有以下前置字元的產品編號的評估模組 (EVM):CDC、LMK 和 LMX。這些產品包括鎖相迴路及電壓控制振盪器 (PLL+VCO)、合成器和時鐘裝置。

支援產品和硬體
模擬型號

LMX2581 IBIS Model

SNAM157.ZIP (54 KB) - IBIS 模型
支援產品和硬體
設計工具

CLOCK-TREE-ARCHITECT — 時鐘樹架構程式設計軟體

時鐘樹架構是一款時鐘樹合成工具,可根據您的系統需求產生時鐘樹解決方案,進而簡化您的設計流程。此工具可從廣泛的計時產品資料庫中汲取資料,產生系統級多晶片計時解決方案。

支援產品和硬體
設計工具

PLLATINUMSIM-SW — PLL 迴路濾波器、相位雜訊、鎖定時間與雜散模擬工具

PLLATINUMSIM-SW 為一模擬工具,可讓使用者建立 PLLatinum™ 積體電路的詳細設計和模擬,包括 LMX 系列的相位鎖定迴路 (PLL) 及合成器。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTV) 32 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片