IWRL6432WMOD
mmWave-Radarmodul zur Bewegungs- und Anwesenheitserkennung
IWRL6432WMOD
- Ease of Use
- Integrated IWRL6432W mmWave sensor
- Small module size: 31mm x 15mm
- Quad Flat Module (QFM) - 4 x 9 LGA Grid
- Easy to mount 30-pad Land Grid Array (LGA)
- Easy to integrate - 18 signals interface
- Simple Configurable APIs (via SPI) to configure Range, Motion Sensitivity, Update rate via external MCU
- Motion and Presence detection indication via GPIO
- Integrated 3 receive channels and 2 transmit antennas etched on PCB
- Integrated power distribution network
- Integrated 40MHz XTAL
- FMCW Transceiver
- On-chip integrated PLL, transmitter, receiver, baseband and ADC
- Frequency Modulated Continuous Wave operation
- 5MHz IF bandwidth, real-only Rx channels
- Ultra-accurate chirp engine based on fractional-N PLL
- Antenna
- Field of View (FoV): ± 60° (Azimuth); ± 60° (Elevation)
- 57GHz - 61.5GHz antenna coverage with 4.5GHz continuous bandwidth
- Certifications
- Targeted modular certification with FCC, RED, TELEC certifications
- Performance
- Human Presence Detection Range typically up to:
- At 0°: 15m
- At edge of FoV: 8m
- Built-in low power modes for power saving
- Human Presence Detection Range typically up to:
- Power management
- 3.3V VCC and VIO operation
- Built-in 1.8V regulator on module
- Built-in on-chip LDO network for enhanced PSRR
- BOM-Optimized mode
- Host Interface
- SPI
- Host PC interface using TI mmWave uDFP
- Interfaces with external MCU
- SPI
- Other interfaces
- Presence Indication
- Wake Up Request
- Temperature operating range
- Industrial grade temperature range: –40°C to 85°C
Texas Instruments introduces the IWRL6432WMOD, the radar module presenting a significant advancement in low-power industrial radar technology. This compact 31mm × 15mm module integrates a 60GHz patch antenna, on-board power management, flash memory, passives and crystal, eliminating the need for specialized mmWave system design expertise while providing simple software configuration options for range, sensitivity, and regions of interest. The module is distinguished by its comprehensive targeted certification with FCC, RED, TELEC that eliminates cost and effort for certification at the end product. Additionally the module provides either SPI based point cloud data outputs or GPIO based presence indication which aids flexible implementation. By addressing customer readiness challenges and enabling autonomous operation across applications such as motion sensing, occupancy detection, and smart home devices, this TI-designed, supported, and distributed device significantly reduces development complexity and accelerates time-to-market for customers seeking to embed mmWave radar sensor capabilities in their products.
Technische Dokumentation
| Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | IWRL6432WMOD mmWave Radar Module For Motion and Presence Detection datasheet | PDF | HTML | 01 Dez 2025 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
BP-IWRL6432WMOD — IWRL6432WMOD-Evaluierungsplatine
The BP-IWRL6432WMOD from Texas Instruments is an easy-to-use low cost FR4-based evaluation board for the IWRL6432W integrated 60GHz mmWave sensor module. This Evaluation Module (EVM) contains everything required to evaluate and start developing software for the radar module. The EVM supports (...)
MMWAVE-UDFP-APPSW — uDFP Package for Low Power mmWave Radar Modules and Front End Device
The mmWave low-power software development kit (SDK) is a collection of software packages that enable application evaluation and development on our low-power mmWave sensors. This tool includes MMWAVE-L-SDK and MMWAVE-L-SDK-6 companion packages to support customer design needs.
MMWAVE-L-SDK and (...)
Unterstützte Produkte und Hardware
Produkte
mmWave-Radarsensoren für Industrieanwendungen
Hardware-Entwicklung
Evaluierungsplatine
MMWAVE-SENSING-ESTIMATOR-CLOUD — mmWave sensing estimator cloud development on TI Resource Explorer
Unterstützte Produkte und Hardware
Produkte
mmWave-Radarsensoren für die Automobilindustrie
mmWave-Radarsensoren für Industrieanwendungen
Hardware-Entwicklung
Evaluierungsplatine
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
Unterstützte Produkte und Hardware
Produkte
Arm Cortex-M0+-MCUs
MSP430 microcontrollers
Arm Cortex-R-MCUs
C2000-Echtzeit-Mikrocontroller
Drahtlos-MCUs für Sub-1 GHz
Energieeffiziente 2,4-GHz-Produkte
Produkte für die drahtlose Verbindung in der Automobilindustrie
mmWave-Radarsensoren für die Automobilindustrie
mmWave-Radarsensoren für Industrieanwendungen
SoC-Fahrassistenzsysteme
Audio- & Radar-DSP-SoCs
Multimedia- & Industrienetzwerk-SoCs
Hardware-Entwicklung
Tochterkarte
Evaluierungsplatine
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.
(...)
Unterstützte Produkte und Hardware
Diese Designressource unterstützt die meisten Produkte in diesen Kategorien.
Informationen zum Support sind der Seite mit den Produktdetails zu entnehmen.
-
parametric-filter Mikroprozessoren & DSPs -
parametric-filter Microcontrollers -
parametric-filter WLAN-Produkte -
parametric-filter Energieeffiziente 2,4-GHz-Produkte -
parametric-filter Signalumformer -
parametric-filter mmWave-Radarsensoren
EDGE-AI-STUDIO — Edge AI Studio
Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers and radar sensors. Whether developing a proof of concept using a model from the TI Model Zoo or leveraging your own model, Edge AI Studio provides the (...)
Unterstützte Produkte und Hardware
Produkte
C2000-Echtzeit-Mikrocontroller
mmWave-Radarsensoren für die Automobilindustrie
mmWave-Radarsensoren für Industrieanwendungen
Multimedia- & Industrienetzwerk-SoCs
SoC-Fahrassistenzsysteme
Hardware-Entwicklung
Evaluierungsplatine
Software
Support-Software
EDGE-AI-STUDIO-MCU — Edge AI Studio for Microcontrollers
Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers and radar sensors. Whether developing a proof of concept using a model from the TI Model Zoo or leveraging your own model, Edge AI Studio provides the (...)
Unterstützte Produkte und Hardware
Produkte
C2000-Echtzeit-Mikrocontroller
mmWave-Radarsensoren für die Automobilindustrie
mmWave-Radarsensoren für Industrieanwendungen
Arm Cortex-M0+-MCUs
Energieeffiziente 2,4-GHz-Produkte
RADAR-ACADEMY — mmWave Radar Academy
Unterstützte Produkte und Hardware
Produkte
mmWave-Radarsensoren für die Automobilindustrie
mmWave-Radarsensoren für Industrieanwendungen
Hardware-Entwicklung
Evaluierungsplatine
Software
Designtool
Firmware
Software-Entwicklungskit (SDK)
IDE, Konfiguration, Compiler oder Debugger
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
Unterstützte Produkte und Hardware
Produkte
C2000-Echtzeit-Mikrocontroller
Arm Cortex-M0+-MCUs
Arm Cortex-R-MCUs
mmWave-Radarsensoren für die Automobilindustrie
mmWave-Radarsensoren für Industrieanwendungen
WLAN-Produkte
Arm Cortex-M4-MCUs
Audio- & Radar-DSP-SoCs
Multimedia- & Industrienetzwerk-SoCs
RADAR-TOOLBOX — Radar evaluation and development support package with example projects, documentation and tools
Unterstützte Produkte und Hardware
Produkte
mmWave-Radarsensoren für Industrieanwendungen
mmWave-Radarsensoren für die Automobilindustrie
Hardware-Entwicklung
Evaluierungsplatine
Software
Software-Entwicklungskit (SDK)
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| QFM (MBB) | 30 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.