Home Mikrocontroller (MCUs) & Prozessoren Microcontrollers MCUs zur digitalen Stromversorgung in Echtzeit
Home
Mikrocontroller (MCUs) & Prozessoren
Microcontrollers
MCUs zur digitalen Stromversorgung in Echtzeit

TMS320F280200

AKTIV

C2000™ 32-Bit-MCU mit 40 MHz, 16 KB Flash

Jetzt bestellen
Datenblatt
Benutzerhandbücher
Fehlerverzeichnis

TMS320F280200

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

CPU 1 C28 Frequency (MHz) 40 Flash memory (kByte) 16 RAM (kByte) 12 ADC type 1 12-bit SAR Total processing (MIPS) 40 UART 1 CAN (#) 0 Sigma-delta filter 0 PWM (Ch) 8 TI functional safety category Functional Safety Quality-Managed Number of ADC channels 7, 13 Direct memory access (Ch) 0 SPI 1 QEP 0 USB No Hardware accelerators CPU only Edge AI enabled Yes Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface I2C, SPI, UART Operating system FreeRTOS Nonvolatile memory (kByte) 16 Number of GPIOs 22 Number of I2Cs 1 Security Secure storage
CPU 1 C28 Frequency (MHz) 40 Flash memory (kByte) 16 RAM (kByte) 12 ADC type 1 12-bit SAR Total processing (MIPS) 40 UART 1 CAN (#) 0 Sigma-delta filter 0 PWM (Ch) 8 TI functional safety category Functional Safety Quality-Managed Number of ADC channels 7, 13 Direct memory access (Ch) 0 SPI 1 QEP 0 USB No Hardware accelerators CPU only Edge AI enabled Yes Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface I2C, SPI, UART Operating system FreeRTOS Nonvolatile memory (kByte) 16 Number of GPIOs 22 Number of I2Cs 1 Security Secure storage
LQFP (PT) 48 81 mm² 9 x 9 TSSOP (DA) 38 101.25 mm² 12.5 x 8.1
  • High-efficiency 32-bit CPU (TMS320C28x)
    • 60 MHz (16.67-ns cycle time)
    • 50 MHz (20-ns cycle time)
    • 40 MHz (25-ns cycle time)
    • 16 × 16 and 32 × 32 MAC operations
    • 16 × 16 dual MAC
    • Harvard bus architecture
    • Atomic operations
    • Fast interrupt response and processing
    • Unified memory programming model
    • Code-efficient (in C/C++ and Assembly)
  • Endianness: Little endian
  • Low cost for both device and system:
    • Single 3.3-V supply
    • No power sequencing requirement
    • Integrated power-on and brown-out resets
    • Small packaging, as low as 38-pin available
    • Low power
    • No analog support pins
  • Clocking:
    • Two internal zero-pin oscillators
    • On-chip crystal oscillator and external clock input
    • Watchdog timer module
    • Missing clock detection circuitry
  • Up to 22 individually programmable, multiplexed GPIO pins with input filtering
  • Peripheral Interrupt Expansion (PIE) block that supports all peripheral interrupts
  • Three 32-bit CPU timers
  • Independent 16-bit timer in each Enhanced Pulse Width Modulator (ePWM)
  • On-chip memory
    • Flash, SARAM, OTP, Boot ROM available
  • Code-security module
  • 128-bit security key and lock
    • Protects secure memory blocks
    • Prevents firmware reverse engineering
  • Serial port peripherals
    • One Serial Communications Interface (SCI) Universal Asynchronous Receiver/Transmitter (UART) module
    • One Serial Peripheral Interface (SPI) module
    • One Inter-Integrated-Circuit (I2C) module
  • Enhanced control peripherals
    • ePWM
    • High-Resolution PWM (HRPWM)
    • Enhanced Capture (eCAP) module
    • Analog-to-Digital Converter (ADC)
    • On-chip temperature sensor
    • Comparator
  • Advanced emulation features
    • Analysis and breakpoint functions
    • Real-time debug through hardware
  • Package options
    • 38-pin DA Thin Shrink Small-Outline Package (TSSOP)
    • 48-pin PT Low-Profile Quad Flatpack (LQFP)
  • Temperature options
    • T: –40°C to 105°C
    • S: –40°C to 125°C
    • Q: –40°C to 125°C (AEC Q100 qualification for automotive applications)
  • High-efficiency 32-bit CPU (TMS320C28x)
    • 60 MHz (16.67-ns cycle time)
    • 50 MHz (20-ns cycle time)
    • 40 MHz (25-ns cycle time)
    • 16 × 16 and 32 × 32 MAC operations
    • 16 × 16 dual MAC
    • Harvard bus architecture
    • Atomic operations
    • Fast interrupt response and processing
    • Unified memory programming model
    • Code-efficient (in C/C++ and Assembly)
  • Endianness: Little endian
  • Low cost for both device and system:
    • Single 3.3-V supply
    • No power sequencing requirement
    • Integrated power-on and brown-out resets
    • Small packaging, as low as 38-pin available
    • Low power
    • No analog support pins
  • Clocking:
    • Two internal zero-pin oscillators
    • On-chip crystal oscillator and external clock input
    • Watchdog timer module
    • Missing clock detection circuitry
  • Up to 22 individually programmable, multiplexed GPIO pins with input filtering
  • Peripheral Interrupt Expansion (PIE) block that supports all peripheral interrupts
  • Three 32-bit CPU timers
  • Independent 16-bit timer in each Enhanced Pulse Width Modulator (ePWM)
  • On-chip memory
    • Flash, SARAM, OTP, Boot ROM available
  • Code-security module
  • 128-bit security key and lock
    • Protects secure memory blocks
    • Prevents firmware reverse engineering
  • Serial port peripherals
    • One Serial Communications Interface (SCI) Universal Asynchronous Receiver/Transmitter (UART) module
    • One Serial Peripheral Interface (SPI) module
    • One Inter-Integrated-Circuit (I2C) module
  • Enhanced control peripherals
    • ePWM
    • High-Resolution PWM (HRPWM)
    • Enhanced Capture (eCAP) module
    • Analog-to-Digital Converter (ADC)
    • On-chip temperature sensor
    • Comparator
  • Advanced emulation features
    • Analysis and breakpoint functions
    • Real-time debug through hardware
  • Package options
    • 38-pin DA Thin Shrink Small-Outline Package (TSSOP)
    • 48-pin PT Low-Profile Quad Flatpack (LQFP)
  • Temperature options
    • T: –40°C to 105°C
    • S: –40°C to 125°C
    • Q: –40°C to 125°C (AEC Q100 qualification for automotive applications)

C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The F2802x family of microcontrollers provides the power of the C28x core coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, and also provides a high level of analog integration.

An internal voltage regulator allows for single-rail operation. Enhancements have been made to the HRPWM to allow for dual-edge control (frequency modulation). Analog comparators with internal 10-bit references have been added and can be routed directly to control the PWM outputs. The ADC converts from 0 to 3.3-V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency.

To learn more about the C2000 MCUs, visit the C2000 Overview at www.ti.com/c2000.

C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The F2802x family of microcontrollers provides the power of the C28x core coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, and also provides a high level of analog integration.

An internal voltage regulator allows for single-rail operation. Enhancements have been made to the HRPWM to allow for dual-edge control (frequency modulation). Analog comparators with internal 10-bit references have been added and can be routed directly to control the PWM outputs. The ADC converts from 0 to 3.3-V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency.

To learn more about the C2000 MCUs, visit the C2000 Overview at www.ti.com/c2000.
filter Andere MCUs zur digitalen Stromversorgung in Echtzeit suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
TMS320F280021 AKTIV C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 32 KB Flash This product is from the latest generation of real-time controllers with similar attributes.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 27
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet TMS320F2802x Microcontrollers datasheet (Rev. P) 18 Jan 2021
* Errata TMS320F2802x, TMS320F2802xx MCUs Silicon Errata (Rev. S) PDF | HTML 28 Okt 2020
* User guide TMS320F2802x, TMS320F2802xx Microcontrollers TRM (Rev. A) 03 Jun 2022
Application note Serial Flash Programming of C2000 Microcontrollers (Rev. I) PDF | HTML 14 Aug 2025
User guide Migration Between TMS320F2802x, TMS320F2803x and F28E12x Guide PDF | HTML 06 Aug 2025
User guide C2000 Real-Time Control Peripheral Reference Guide (Rev. U) PDF | HTML 11 Jul 2025
Product overview Safety Package for Automotive and Industrial Real-Time Microcontrollers (Rev. E) PDF | HTML 23 Jun 2025
Application note Development Tool Versions for C2000™ Support (Rev. A) PDF | HTML 26 Jun 2024
Application note Migrating Software From 8-Bit (Byte) Addressable CPU’s to C28x CPU (Rev. A) PDF | HTML 19 Apr 2023
Application note Enhancing the Computational Performance of the C2000™ Microcontroller Family (Rev. C) PDF | HTML 14 Dez 2021
Application note C2000™ Unique Device Number (Rev. B) PDF | HTML 17 Sep 2020
Application note Migrating From TMS320F2802x/2803x to TMS320F2806x (Rev. A) 17 Mär 2020
Application note TMS320F2802x/TMS320F2803x to TMS320F28002x Migration Overview 13 Jan 2020
Application note Configurable Error Generator for Controller Area Network PDF | HTML 19 Dez 2019
Application note C2000 ADC (Type-3) Performance Versus ACQPS PDF | HTML 07 Okt 2019
Application note Calculating Useful Lifetimes of Embedded Processors (Rev. B) PDF | HTML 07 Mai 2019
Application note MSL Ratings and Reflow Profiles (Rev. A) 13 Dez 2018
User guide Digitally Controlled 2-Phase (Il PFC) Converter Using C2000 Piccolo-A MCU 08 Jan 2016
Application note Migrating from TMS320F280x to TMS320F2802x/TMS320F2803x (Rev. C) 11 Aug 2015
User guide TMS320C28x DSP CPU and Instruction Set (Rev. F) 10 Apr 2015
Application note Calculating FIT for a Mission Profile 24 Mär 2015
More literature controlSUITE Getting Started Guide (Rev. C) 09 Feb 2015
Application note High-Voltage Half-Bridge LLC Resonant DC/DC Conv SW w/ Synch Rectification Kit 02 Jul 2013
Application note Multi-DC/DC Conversion & Color LED Control Integrated on a C2000 Microcontroller 01 Feb 2012
Application note Oscillator Compensation Guide (Rev. A) 18 Jun 2010
Application note Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices 16 Nov 2009
Application note Common Object File Format (COFF) 15 Apr 2009

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

XDS110ISO-EVM — XDS110 isoliertes Plug-in-Evaluierungsmodul für C2000 und Sitara™ controlSOMs

Die isolierte XDS110-Steckplatine ist ein Evaluierungsmodul zur Echtzeit-Debugging- und Flash-Programmierung für C2000- und Sitara-controlSOMs. Sie kann über einen nicht isolierten 120-poligen Steckverbinder oder über einen elektrisch isolierten 16-poligen Steckverbinder mit C2000- und (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Evaluierungsplatine

ALGO-3P-UISP1-TI — Algocraft μISP1 Programmierer für Texas Instruments-Bausteine

μISP kann entweder an einen Host-PC angeschlossen (RS-232-, USB-, LAN-Verbindungen sind integriert) oder im Standalone-Modus arbeiten.

Die Programmierungszyklusausführung im Standalone-Modus kann durch einfaches Drücken der START-Taste oder über einige TTL-Steuerleitungen erfolgen.

Seine kompakte (...)

Von: Algocraft
Partner-Website besuchen
Debug-Tastkopf

TMDSEMU200-U — XDS200-USB-Debug-Tastkopf

Der XDS200 ist ein Debug-Tastkopf (Emulator) zum Debugging von Embedded-Bausteinen von TI. Für die meisten Bausteine wird die Verwendung der neueren, kostengünstigeren XDS110 (www.ti.com/tool/TMDSEMU110-U) empfohlen. Der XDS200 unterstützt eine große Zahl von Standards (IEEE1149.1, IEEE1149.7, SWD) (...)

Nicht verfügbar auf TI.com
Debug-Tastkopf

TMDSEMU560V2STM-U — XDS560v2 System-Trace-USB-Debug-Tastkopf

Der XDS560v2 ist die leistungsstärkste Debug-Sonde aus der XDS560™ Familie von Debug-Sonden und unterstützt sowohl den traditionellen JTAG-Standard (IEEE1149.1) als auch cJTAG (IEEE1149.7).  Bitte beachten: Diese Lösung unterstützt kein Serial Wire Debug (SWD).

Alle XDS-Debug-Tastköpfe unterstützen (...)

Nicht verfügbar auf TI.com
Debug-Tastkopf

TMDSEMU560V2STM-UE — XDS560v2 System-Trace-USB-und Ethernet-Debug-Tastkopf

The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors that (...)

Nicht verfügbar auf TI.com
Hardware-Programmiertool

ALGO-3P-WRITENOW — Algocraft WriteNow! Programmierer

WriteNow! Die Reihe der systeminternen Programmierer ist ein Durchbruch in der Programmierbranche. Die Programmierer unterstützen eine große Anzahl von Bausteinen (Mikrocontroller, Speicher, CPLDs und andere programmierbare Bausteine) verschiedener Hersteller und verfügen über eine kompakte Größe (...)

Von: Algocraft
Partner-Website besuchen
Anwendungssoftware und Frameworks

INSTASPIN-BLDC — InstaSPIN™-BLDC-Lösung

In keeping with TI’s philosophy of making motor control more accessible and easier to use by design engineers, TI is proud to announce the release of its newest motor control technology, InstaSPIN-BLDC. Targeted at low cost BLDC applications, InstaSPIN-BLDC is a sensorless control technique based (...)
View Options
Treiber oder Bibliothek

CONTROLSUITE — controlSUITE™-Software-Suite: Software und Entwicklungstools für C2000™-Mikrocontroller

Bei der controlSUITE™ für C2000™-Mikrocontroller handelt es sich um ein umfassendes Set von Softwareinfrastruktur, Tools und Dokumentationen, mit dem die Entwicklungszeit von Systemen minimiert werden soll. Von bausteinspezifischen Treibern und Support-Software bis hin zu vollständigen Beispielen (...)
View Options
Treiber oder Bibliothek

SFRA — Powersuite-Software für digitale Stromversorgung Frequenzgang-Analysator-Tool für C2000™-MCUs

The Software Frequency Response Analyzer (SFRA) is one of several tools included in the powerSUITE Digital Power Supply Design Software Tools for C2000™ Microcontrollers.  The SFRA includes a software library that enables developers to quickly measure the frequency response of their digital (...)
Benutzerhandbuch: PDF | HTML
View Options
Erste Schritte

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Legen Sie los
IDE, Konfiguration, Compiler oder Debugger

C2000_CLA_SAFETI_CQKIT_RV — C2000™ and CLA safety compiler qualification kit (leverages compiler release validations)

The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.

The Safety Compiler Qualification Kit:

  • is free of charge for TI customers
  • does (...)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Download-Optionen
IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start Download-Optionen
IDE, Konfiguration, Compiler oder Debugger

SOLUTION_ADAPTER — powerSUITE-Adaptertool für digitale Stromversorgungsanwendungen für C2000™-MCUs

The Solution Adapter is one of several tools included in the powerSUITE Digital Power Supply Design Software Tools for C2000™ Microcontrollers.  The Solution Adapter allows you to modify existing code examples from TI digital power kits and configure them to run on a custom digital power (...)
View Options
Betriebssystem (BS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS Vorzertifiziertes Sicherheits-RTOS

SAFERTOS® ist ein einzigartiges Echtzeitbetriebssystem für Embedded-Prozessoren. Er ist vom TÜV SÜD nach den Normen IEC 61508 SIL3 und ISO 26262 ASILD vorzertifiziert. SAFERTOS® wurde vom Expertenteam von WHIS speziell auf Sicherheit ausgelegt und wird weltweit in sicherheitskritischen Anwendungen (...)
Von: WITTENSTEIN High Integrity Systems
Partner-Website besuchen
Software-Programmiertool

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start Download-Optionen
Support-Software

SPRCAA6 — TMS320F2802x RevA Flash APIs using both CCS3.3v and CCS4.0v

Are you looking to integrate flash programming into your project?

If so the TMS320F2802x Flash API V201 Release is what you're looking for. This download contains complete example projects and documentation to get you on your way.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Simulationsmodell

F280200, F28020, F28021, F28022, F28023, F28026, F28027 DA IBIS Model (Rev. A)

SPRM399A.ZIP (184 KB) - IBIS Model
Herunterladen
Designtool

C2000-3P-SEARCH — C2000 Drittanbieter-Suchtool

TI has partnered with multiple companies to offer a wide range of solutions and services for TI C2000 devices. These companies can accelerate your path to production using C2000 devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your (...)
Herunterladen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
LQFP (PT) 48 Ultra Librarian
TSSOP (DA) 38 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos