Produktdetails

CPU 1 Arm Cortex-A15 Frequency (MHz) 1500 Coprocessors 4 Arm Cortex-M4 Graphics acceleration 1 2D, 1 3D Display type 1 HDMI, 3 LCD Protocols Ethernet, ICSS, Profibus, Profinet PCIe 2 PCIe Gen 2 Features Networking Operating system Linux, RTOS Security Cryptographic acceleration, Device attestation & anti-counterfeit, Hardware-enforced isolation, Secure boot, Secure debug, Secure storage, Software IP protection Rating Military Power supply solution LP8733 + LP873220, TPS65916 Operating temperature range (°C) -55 to 125 Edge AI enabled No
CPU 1 Arm Cortex-A15 Frequency (MHz) 1500 Coprocessors 4 Arm Cortex-M4 Graphics acceleration 1 2D, 1 3D Display type 1 HDMI, 3 LCD Protocols Ethernet, ICSS, Profibus, Profinet PCIe 2 PCIe Gen 2 Features Networking Operating system Linux, RTOS Security Cryptographic acceleration, Device attestation & anti-counterfeit, Hardware-enforced isolation, Secure boot, Secure debug, Secure storage, Software IP protection Rating Military Power supply solution LP8733 + LP873220, TPS65916 Operating temperature range (°C) -55 to 125 Edge AI enabled No
FCBGA (ZBO) 760 529 mm² (23 mm × 23 mm)
  • For Silicon Revision 1.0 Information, See SPRS919
  • ARM® Cortex®-A15 Microprocessor Subsystem
  • C66x Floating-Point VLIW DSP
    • Fully Object-Code Compatible With C67x and C64x+
    • Up to Thirty-Two 16 × 16-Bit Fixed-Point Multiplies per Cycle
  • Up to 512KB of On-Chip L3 RAM
  • Level 3 (L3) and Level 4 (L4) Interconnects
  • DDR3/DDR3L Memory Interface (EMIF) Module
    • Supports up to DDR3-1333 (667 MHz)
    • Up to 2GB Across Single Chip Select
  • Dual ARM® Cortex®-M4 Coprocessors
  • IVA-HD Subsystem
  • Display Subsystem
    • Full-HD Video (1920 × 1080p, 60 fps)
    • Multiple Video Input and Video Output
    • 2D and 3D Graphics
    • Display Controller With DMA Engine and up to Three Pipelines
    • HDMI™ Encoder: HDMI 1.4a and DVI 1.0 Compliant
  • 2x Dual-Core Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS)
  • Accelerator (BB2D) Subsystem
    • Vivante™ GC320 Core
  • Video Processing Engine (VPE)
  • Available Single-Core PowerVR® SGX544 3D GPU
  • One Video Input Port (VIP) Module
    • Support for up to Four Multiplexed Input Ports
  • General-Purpose Memory Controller (GPMC)
  • Enhanced Direct Memory Access (EDMA) Controller
  • Ethernet Subsystem
  • Sixteen 32-Bit General-Purpose Timers
  • 32-Bit MPU Watchdog Timer
  • Five High-Speed Inter-Integrated Circuit (I2C) Ports
  • HDQ™/1-Wire® Interface
  • Ten Configurable UART/IrDA/CIR Modules
  • Four Multichannel Serial Peripheral Interfaces (McSPI)
  • Quad SPI Interface (QSPI)
  • SATA Gen2 Interface
  • Eight Multichannel Audio Serial Port (McASP) Modules
  • SuperSpeed USB 3.0 Dual-Role Device
  • High-Speed USB 2.0 Dual-Role Device
  • Four MultiMedia Card/Secure Digital/Secure Digital Input Output Interfaces (MMC/SD/SDIO)
  • PCI Express® 3.0 Subsystems With Two 5-Gbps Lanes
    • One 2-Lane Gen2-Compliant Port
    • Or Two 1-Lane Gen2-Compliant Ports
  • Dual Controller Area Network (DCAN) Modules
    • CAN 2.0B Protocol
  • MIPI® CSI-2 Camera Serial Interface
  • Up to 215 General-Purpose I/O (GPIO) Pins
  • Power, Reset, and Clock Management
  • On-Chip Debug With CTools Technology
  • 28-nm CMOS Technology
  • 23 mm × 23 mm, 0.8-mm Pitch, 760-Pin BGA (ZBO)
  • For Silicon Revision 1.0 Information, See SPRS919
  • ARM® Cortex®-A15 Microprocessor Subsystem
  • C66x Floating-Point VLIW DSP
    • Fully Object-Code Compatible With C67x and C64x+
    • Up to Thirty-Two 16 × 16-Bit Fixed-Point Multiplies per Cycle
  • Up to 512KB of On-Chip L3 RAM
  • Level 3 (L3) and Level 4 (L4) Interconnects
  • DDR3/DDR3L Memory Interface (EMIF) Module
    • Supports up to DDR3-1333 (667 MHz)
    • Up to 2GB Across Single Chip Select
  • Dual ARM® Cortex®-M4 Coprocessors
  • IVA-HD Subsystem
  • Display Subsystem
    • Full-HD Video (1920 × 1080p, 60 fps)
    • Multiple Video Input and Video Output
    • 2D and 3D Graphics
    • Display Controller With DMA Engine and up to Three Pipelines
    • HDMI™ Encoder: HDMI 1.4a and DVI 1.0 Compliant
  • 2x Dual-Core Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS)
  • Accelerator (BB2D) Subsystem
    • Vivante™ GC320 Core
  • Video Processing Engine (VPE)
  • Available Single-Core PowerVR® SGX544 3D GPU
  • One Video Input Port (VIP) Module
    • Support for up to Four Multiplexed Input Ports
  • General-Purpose Memory Controller (GPMC)
  • Enhanced Direct Memory Access (EDMA) Controller
  • Ethernet Subsystem
  • Sixteen 32-Bit General-Purpose Timers
  • 32-Bit MPU Watchdog Timer
  • Five High-Speed Inter-Integrated Circuit (I2C) Ports
  • HDQ™/1-Wire® Interface
  • Ten Configurable UART/IrDA/CIR Modules
  • Four Multichannel Serial Peripheral Interfaces (McSPI)
  • Quad SPI Interface (QSPI)
  • SATA Gen2 Interface
  • Eight Multichannel Audio Serial Port (McASP) Modules
  • SuperSpeed USB 3.0 Dual-Role Device
  • High-Speed USB 2.0 Dual-Role Device
  • Four MultiMedia Card/Secure Digital/Secure Digital Input Output Interfaces (MMC/SD/SDIO)
  • PCI Express® 3.0 Subsystems With Two 5-Gbps Lanes
    • One 2-Lane Gen2-Compliant Port
    • Or Two 1-Lane Gen2-Compliant Ports
  • Dual Controller Area Network (DCAN) Modules
    • CAN 2.0B Protocol
  • MIPI® CSI-2 Camera Serial Interface
  • Up to 215 General-Purpose I/O (GPIO) Pins
  • Power, Reset, and Clock Management
  • On-Chip Debug With CTools Technology
  • 28-nm CMOS Technology
  • 23 mm × 23 mm, 0.8-mm Pitch, 760-Pin BGA (ZBO)

AM5718-HIREL Sitara ARM applications processors are built to meet the intense processing needs of the modern embedded products.

AM5718-HIREL devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set.

Programmability is provided by a single-core ARM Cortex-A15 RISC CPU with Neon™ extensions and a TI C66x VLIW floating-point DSP core. The ARM processor lets developers keep control functions separate from vision algorithms programmed on the DSP and coprocessors, thus reducing the complexity of the system software.

Additionally, TI provides a complete set of development tools for the ARM and C66x DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.

The AM5718-HIREL Sitara ARM processor family is qualified according to the AEC-Q100 Standard.

AM5718-HIREL Sitara ARM applications processors are built to meet the intense processing needs of the modern embedded products.

AM5718-HIREL devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set.

Programmability is provided by a single-core ARM Cortex-A15 RISC CPU with Neon™ extensions and a TI C66x VLIW floating-point DSP core. The ARM processor lets developers keep control functions separate from vision algorithms programmed on the DSP and coprocessors, thus reducing the complexity of the system software.

Additionally, TI provides a complete set of development tools for the ARM and C66x DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.

The AM5718-HIREL Sitara ARM processor family is qualified according to the AEC-Q100 Standard.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 11
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt AM5718-HIREL Sitara Processors Silicon Revision 2.0 datasheet PDF | HTML 25.08.2017
* Benutzerhandbuch AM571x and AM570x Sitara Processor Technical Reference Manual (Rev. K) PDF | HTML 14.05.2024
* Errata AM571x (SR 2.1, 2.0, 1.0) and AM570x (SR 2.1, 2.0) Sitara Processors Errata (Rev. H) PDF | HTML 02.07.2024
Anwendungshinweis Intra Drive Communication Using 8b-10b Line Code With Programmable Real Time Uni PDF | HTML 24.05.2023
Anwendungshinweis Ethernet PHY Configuration Using MDIO for Industrial Applications (Rev. A) 07.05.2021
Anwendungshinweis AM57x Schematic Checklist (Rev. B) 09.07.2019
Anwendungshinweis AM571x/AM572x/AM574x PCB Escape Routing (Rev. A) 19.03.2019
Anwendungshinweis Common EOS pitfalls in board design PDF | HTML 13.02.2019
Anwendungshinweis AM57xx Hardware Design Guide PDF | HTML 25.01.2019
Anwendungshinweis PRU-ICSS / PRU_ICSSG Migration Guide PDF | HTML 05.11.2018
Whitepaper Enable security and amp up chip performance w/ hardware-accelerated cryptograpy (Rev. A) 11.08.2016

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TMDXIDK5718 — AM571x-Industrie-Entwicklungskit (IDK)

TMDXIDK5718: Das AM571x-Industrie-Entwicklungskit (IDK) unterstützt den Einzelkern-AM57x mit Cortex A-15 speziell für industrielle Anwendungen.

  1. Unterstützung für simultanes 6-Port-Ethernet, 2x RGMII und 4x MII
  2. Integrierte Industrial-Ethernet- und Feldbus-Protokolle für den simultanen Master/Slave-, (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

BEAGLEBOARD-X15 — BeagleBoard-X15-Entwicklungsplatine

Das BeagleBoard-X15 ist eine kostengünstige, von der Community unterstützte Open-Source-Entwicklungsplattform für Sitara&Trade; AM57x Prozessoren (AM5728, AM5726, AM5718, AM5716).  mit zwei 1,5‑GHz ARM® Cortex®-A15-Kerne für Benutzerschnittstellen, Video- und Grafikbeschleuniger, zwei (...)

Unterstützte Produkte und Hardware
Evaluierungsplatine

CRLNK-3P-SOMS — Critical Link system on modules for TI ARM-based Processors

Critical Link is a US-based embedded systems company offering System on Modules (SoMs) and scientific imaging platforms for electronic applications around the world. The MitySOM® and MityDSP® families incorporate DSP, FPGA, and ARM technologies, and are designed for long product lifespan and (...)

Unterstützte Produkte und Hardware
Debug-Tastkopf

TMDSEMU110-U — XDS110 JTAG-Debug-Tastkopf

Der XDS110 von Texas Instruments ist eine neue Klasse von Debug-Tastkopf (Emulator) für Embedded-Prozessoren von TI. Der XDS110 ersetzt die XDS100-Familie und unterstützt eine größere Anzahl von Standards (IEEE1149.1, IEEE1149.7, SWD) in einem einzigen Pod. Alle XDS-Debug-Tastköpfe unterstützen (...)

Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Software-Entwicklungskit (SDK)

PROCESSOR-SDK-AM57X — Prozessor-SDK für AM57x Sitara Processors für Linux und TI-RTOS-Support

Das Prozessor-SDK (Software Development Kit) ist eine vereinheitliche Softwareplattform für alle Embedded-Prozessoren von TI. Es ist einfach einzurichten und bringt bereits alle Funktionen für den schnellen Zugriff auf Benchmarks und Demos mit. Alle Versionen des Prozessor-SDK lassen sich (...)

Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

Unterstützte Produkte und Hardware
Onlineschulungen

AM57X-ACADEMY — AM57x academy

The AM57x academy is a great resource for developers to learn about the AM57x platform. This academy delivers easy-to-use training modules that span a wide range of topics for AM57x devices.
Unterstützte Produkte und Hardware
Treiber oder Bibliothek

PRU-ICSS-INDUSTRIAL-SW — PRU-ICSS-Industriesoftware für Sitara™-Prozessoren

Das PRU-ICSS-Protokoll ermöglicht industrielle Echtzeitkommunikation für TI Sitara-Prozessoren.  Die PRU-ICSS-Protokolle basieren auf Prozessor-SDK-RTOS, der einheitlichen Softwareentwicklungsplattform von TI. Sie enthalten optimierte PRU-ICSS-Firmware, einen entsprechenden PRU-ICSS-Treiber für den (...)

Unterstützte Produkte und Hardware
Treiber oder Bibliothek

TI-BT-4-2-STACK-LINUX-ADDON — TI Bluetooth 4.2 Stack Add-On für Linux-Plattformen mit WL183x und CC2564C

Dieses Paket enthält das Installationspaket, das vorkompilierte Objekt des Bluetooth-Stacks und Platform Managers von TI und das vorkompilierte Objekt mit der Quelle der Musteranwendungen für das einfache Upgrade der Standard-LINUX-EZSDK-Binärdatei auf einem AM335x-EVM. Die Software wurde mit (...)

lock = Nur mit Exportgenehmigung (1 Minute)
Unterstützte Produkte und Hardware
Software-Programmiertool

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash ist Teil des umfassenden CCStudio™-Entwicklungsökosystem von TI und ein Softwaretool zur Programmierung des integrierten Flash-Speichers von TI-Mikrocontrollern und drahtlosen Kommunikationsbausteinen sowie des integrierten Flash-Speichers für TI-Prozessoren. UniFlash bietet sowohl (...)

Unterstützte Produkte und Hardware
Simulationsmodell

AM571x 23 mm Thermal Models

SPRM663.ZIP (2 KB) - Wärmemodell
Unterstützte Produkte und Hardware
Simulationsmodell

AM571x BSDL Model

SPRM662.ZIP (13 KB) - BSDL-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

AM571x IBIS Model

SPRM661.ZIP (12620 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Berechnungstool

POWEREST — Tool zur Schätzung des Stromverbrauchs (Power Estimation Tool, PET)

Das Tool zur Schätzung des Stromverbrauchs (Power Estimation Tool, PET) bietet Benutzern die Möglichkeit, Einblicke in den Stromverbrauch ausgewählter TI-Prozessoren zu erhalten. Das Tool bietet dem Benutzer die Möglichkeit, mehrere Anwendungsszenarien auszuwählen und ein besseres Verständnis des (...)

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
FCBGA (ZBO) 760 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videoreihe

Alle Videos anzeigen

Videos