AM623

AKTIV

Internet der Dinge (IoT) und Gateway-SoC mit Objekt- und Gestenerkennung auf Basis von Arm® Cortex®-

Produktdetails

CPU 1 Arm Cortex-A53, 2 Arm Cortex-A53, 4 Arm Cortex-A53 Frequency (MHz) 1400 Coprocessors 1 Arm Cortex-M4F Display type MIPI DPI, OLDI Protocols Ethernet, TSN Hardware accelerators CPU only, Programable real-time unit Features General purpose Operating system Linux Security Secure boot Rating Catalog Power supply solution TPS65219 Operating temperature range (°C) -40 to 125 Edge AI enabled Yes
CPU 1 Arm Cortex-A53, 2 Arm Cortex-A53, 4 Arm Cortex-A53 Frequency (MHz) 1400 Coprocessors 1 Arm Cortex-M4F Display type MIPI DPI, OLDI Protocols Ethernet, TSN Hardware accelerators CPU only, Programable real-time unit Features General purpose Operating system Linux Security Secure boot Rating Catalog Power supply solution TPS65219 Operating temperature range (°C) -40 to 125 Edge AI enabled Yes
FCCSP (ALW) 425 169 mm² 13 x 13

Processor Cores:

  • Up to Quad 64-bit Arm Cortex-A53 microprocessor subsystem at up to 1.4GHz
    • Quad-core Cortex-A53 cluster with 512KB L2 shared cache with SECDED ECC
    • Each A53 Core has 32KB L1 DCache with SECDED ECC and 32KB L1 ICache with Parity protection
  • Single-core Arm® Cortex®-M4F MCU at up to 400MHz
    • 256KB SRAM with SECDED ECC
  • Dedicated Device/Power Manager

Multimedia:

  • Display subsystem
    • Dual display support
    • 1920x1080 @ 60fps for each display
    • 1x 2048x1080 + 1x 1280x720
    • Up to 165MHz pixel clock support with Independent PLL for each display
    • OLDI (4 lanes LVDS - 2x) and DPI (24-bit RGB LVCMOS)
    • Support safety feature such as freeze frame detection and MISR data check
  • 3D Graphics Processing Unit
    • 1 pixel per clock or higher
    • Fillrate greater than 500Mpixels/sec
    • >500MTexels/s, >8GFLOPs
    • Supports at least 2 composition layers
    • Supports up to 2048x1080 @60fps
    • Supports ARGB32, RGB565 and YUV formats
    • 2D graphics capable
    • OpenGL ES 3.1, Vulkan 1.2
  • One Camera Serial interface (CSI-Rx) - 4 Lane with DPHY
    • MIPI CSI-2 v1.3 Compliant + MIPI D-PHY 1.2
    • Support for 1,2,3 or 4 data lane mode up to 1.5Gbps per lane
    • ECC verification/correction with CRC check + ECC on RAM
    • Virtual Channel support (up to 16)
    • Ability to write stream data directly to DDR via DMA

Memory Subsystem:

  • Up to 816KB of On-chip RAM
    • 64KB of On-chip RAM (OCSRAM) with SECDED ECC , Can be divided into smaller banks in increments of 32KB for as many as 2 separate memory banks
    • 256KB of On-chip RAM with SECDED ECC in SMS Subsystem
    • 176KB of On-chip RAM with SECDED ECC in SMS Subsystem for TI security firmware
    • 256KB of On-chip RAM with SECDED ECC in Cortex-M4F MCU subsystem
    • 64KB of On-chip RAM with SECDED ECC in Device/Power Manager Subsystem
  • DDR Subsystem (DDRSS)
    • Supports LPDDR4, DDR4 memory types
    • 16-Bit data bus with inline ECC
    • Supports speeds up to 1600MT/s
    • Max addressable range
      • 8GBytes with DDR4
      • 4GBytes with LPDDR4

Functional Safety:

  • Functional Safety-Compliant targeted [Automotive]
    • Developed for functional safety applications
    • Documentation will be available to aid ISO 26262 functional safety system design
    • Systematic capability up to ASIL D targeted
    • Hardware integrity up to ASIL B targeted
    • Safety-related certification
      • ISO 26262 by TUV SUD planned
  • AEC - Q100 qualified

Security:

  • Secure boot supported
    • Hardware-enforced Root-of-Trust (RoT)
    • Support to switch RoT via backup key
    • Support for takeover protection, IP protection, and anti-roll back protection
  • Trusted Execution Environment (TEE) supported
    • Arm TrustZone based TEE
    • Extensive firewall support for isolation
    • Secure watchdog/timer/IPC
    • Secure storage support
    • Replay Protected Memory Block (RPMB) support
  • Dedicated Security Controller with user programmable HSM core and dedicated security DMA & IPC subsystem for isolated processing
  • Cryptographic acceleration supported
    • Session-aware cryptographic engine with ability to auto-switch key-material based on incoming data stream
      • Supports cryptographic cores
    • AES – 128-/192-/256-Bit key sizes
    • SHA2 – 224-/256-/384-/512-Bit key sizes
    • DRBG with true random number generator
    • PKA (Public Key Accelerator) to Assist in RSA/ECC processing for secure boot
  • Debugging security
    • Secure software controlled debug access
    • Security aware debugging

PRU Subsystem:

  • Dual-core Programmable Real-Time Unit Subystem (PRUSS) running up to 333MHz
  • Intended for driving GPIO for cycle accurate protocols such as additional:
    • General Purpose Input/Output (GPIO)
    • UARTs
    • I2C
    • External ADC
  • 16KByte program memory per PRU with SECDED ECC
  • 8KB data memory per PRU with SECDED ECC
  • 32KB general purpose memory with SECDED ECC
  • CRC32/16 HW accelerator
  • Scratch PAD memory with 3 banks of 30 x 32-bit registers
  • 1 Industrial 64-bit timer with 9 capture and 16 compare events, along with slow and fast compensation
  • 1 interrupt controller (INTC), minimum of 64 input events supported

High-Speed Interfaces:

  • Integrated Ethernet switch supporting (total 2 external ports)
    • RMII(10/100) or RGMII (10/100/1000)
    • IEEE1588 (Annex D, Annex E, Annex F with 802.1AS PTP)
    • Clause 45 MDIO PHY management
    • Packet Classifier based on ALE engine with 512 classifiers
    • Priority based flow control
    • Time sensitive networking (TSN) support
    • Four CPU H/W interrupt Pacing
    • IP/UDP/TCP checksum offload in hardware
  • Two USB2.0 Ports
    • Port configurable as USB host, USB peripheral, or USB Dual-Role Device (DRD mode)
    • Integrated USB VBUS detection

General Connectivity:

  • 9x Universal Asynchronous Receiver-Transmitters (UART)
  • 5x Serial Peripheral Interface (SPI) controllers
  • 6x Inter-Integrated Circuit (I2C) ports
  • 3x Multichannel Audio Serial Ports (McASP)
    • Transmit and Receive Clocks up to 50MHz
    • Up to 4/6/16 Serial Data Pins across 3x McASP with Independent TX and RX Clocks
    • Supports Time Division Multiplexing (TDM), Inter-IC Sound (I2S), and Similar Formats
    • Supports Digital Audio Interface Transmission (SPDIF, IEC60958-1, and AES-3 Formats)
    • FIFO Buffers for Transmit and Receive (256 Bytes)
    • Support for audio reference output clock
  • 3x enhanced PWM modules (ePWM)
  • 3x enhanced Quadrature Encoder Pulse modules (eQEP)
  • 3x enhanced Capture modules (eCAP)
  • General-Purpose I/O (GPIO), All LVCMOS I/O can be configured as GPIO
  • 3x Controller Area Network (CAN) modules with CAN-FD support
    • Conforms w/ CAN Protocol 2.0 A, B and ISO 11898-1
    • Full CAN FD support (up to 64 data bytes)
    • Parity/ECC check for Message RAM
    • Speed up to 8Mbps

Media and Data Storage:

  • 3x Multi-Media Card/Secure Digital (MMC/SD/SDIO) interface
    • 1x 8-bit eMMC interface up to HS200 speed
    • 2x 4-bit SD/SDIO interface up to UHS-I
    • Compliant with eMMC 5.1, SD 3.0 and SDIO Version 3.0
  • 1× General-Purpose Memory Controller (GPMC) up to 133MHz
    • Flexible 8- and 16-Bit Asynchronous Memory Interface With up to four Chip (22-bit address) Selects (NAND, NOR, Muxed-NOR, and SRAM)
    • Uses BCH Code to Support 4-, 8-, or 16-Bit ECC
    • Uses Hamming Code to Support 1-Bit ECC
    • Error Locator Module (ELM)
      • Used With the GPMC to Locate Addresses of Data Errors From Syndrome Polynomials Generated Using a BCH Algorithm
      • Supports 4-, 8-, and 16-Bit Per 512-Byte Block Error Location Based on BCH Algorithms
  • OSPI/QSPI with DDR / SDR support
    • Support for Serial NAND and Serial NOR flash devices
    • 4GBytes memory address support
    • XIP mode with optional on-the-fly encryption

Power Management:

  • Low power modes supported by Device/Power Manager
    • Partial IO support for CAN/GPIO/UART wakeup
    • DeepSleep
    • MCU Only
    • Standby
    • Dynamic frequency scaling for Cortex-A53

Optimal Power Management Solution:

  • Recommended TPS65219 Power Management ICs (PMIC)
    • Companion PMIC specially designed to meet device power supply requirements
    • Flexible mapping and factory programmed configurations to support different use cases

Boot Options:

  • UART
  • I2C EEPROM
  • OSPI/QSPI Flash
  • GPMC NOR/NAND Flash
  • Serial NAND Flash
  • SD Card
  • eMMC
  • USB (host) boot from Mass Storage device
  • USB (device) boot from external host (DFU mode)
  • Ethernet

Technology / Package:

  • 16nm technology
  • 13mm x 13mm, 0.5mm pitch, 425-pin FCCSP BGA (ALW)
  • 17.2mm x 17.2mm, 0.8mm pitch, 441-pin FCBGA (AMC)

Processor Cores:

  • Up to Quad 64-bit Arm Cortex-A53 microprocessor subsystem at up to 1.4GHz
    • Quad-core Cortex-A53 cluster with 512KB L2 shared cache with SECDED ECC
    • Each A53 Core has 32KB L1 DCache with SECDED ECC and 32KB L1 ICache with Parity protection
  • Single-core Arm® Cortex®-M4F MCU at up to 400MHz
    • 256KB SRAM with SECDED ECC
  • Dedicated Device/Power Manager

Multimedia:

  • Display subsystem
    • Dual display support
    • 1920x1080 @ 60fps for each display
    • 1x 2048x1080 + 1x 1280x720
    • Up to 165MHz pixel clock support with Independent PLL for each display
    • OLDI (4 lanes LVDS - 2x) and DPI (24-bit RGB LVCMOS)
    • Support safety feature such as freeze frame detection and MISR data check
  • 3D Graphics Processing Unit
    • 1 pixel per clock or higher
    • Fillrate greater than 500Mpixels/sec
    • >500MTexels/s, >8GFLOPs
    • Supports at least 2 composition layers
    • Supports up to 2048x1080 @60fps
    • Supports ARGB32, RGB565 and YUV formats
    • 2D graphics capable
    • OpenGL ES 3.1, Vulkan 1.2
  • One Camera Serial interface (CSI-Rx) - 4 Lane with DPHY
    • MIPI CSI-2 v1.3 Compliant + MIPI D-PHY 1.2
    • Support for 1,2,3 or 4 data lane mode up to 1.5Gbps per lane
    • ECC verification/correction with CRC check + ECC on RAM
    • Virtual Channel support (up to 16)
    • Ability to write stream data directly to DDR via DMA

Memory Subsystem:

  • Up to 816KB of On-chip RAM
    • 64KB of On-chip RAM (OCSRAM) with SECDED ECC , Can be divided into smaller banks in increments of 32KB for as many as 2 separate memory banks
    • 256KB of On-chip RAM with SECDED ECC in SMS Subsystem
    • 176KB of On-chip RAM with SECDED ECC in SMS Subsystem for TI security firmware
    • 256KB of On-chip RAM with SECDED ECC in Cortex-M4F MCU subsystem
    • 64KB of On-chip RAM with SECDED ECC in Device/Power Manager Subsystem
  • DDR Subsystem (DDRSS)
    • Supports LPDDR4, DDR4 memory types
    • 16-Bit data bus with inline ECC
    • Supports speeds up to 1600MT/s
    • Max addressable range
      • 8GBytes with DDR4
      • 4GBytes with LPDDR4

Functional Safety:

  • Functional Safety-Compliant targeted [Automotive]
    • Developed for functional safety applications
    • Documentation will be available to aid ISO 26262 functional safety system design
    • Systematic capability up to ASIL D targeted
    • Hardware integrity up to ASIL B targeted
    • Safety-related certification
      • ISO 26262 by TUV SUD planned
  • AEC - Q100 qualified

Security:

  • Secure boot supported
    • Hardware-enforced Root-of-Trust (RoT)
    • Support to switch RoT via backup key
    • Support for takeover protection, IP protection, and anti-roll back protection
  • Trusted Execution Environment (TEE) supported
    • Arm TrustZone based TEE
    • Extensive firewall support for isolation
    • Secure watchdog/timer/IPC
    • Secure storage support
    • Replay Protected Memory Block (RPMB) support
  • Dedicated Security Controller with user programmable HSM core and dedicated security DMA & IPC subsystem for isolated processing
  • Cryptographic acceleration supported
    • Session-aware cryptographic engine with ability to auto-switch key-material based on incoming data stream
      • Supports cryptographic cores
    • AES – 128-/192-/256-Bit key sizes
    • SHA2 – 224-/256-/384-/512-Bit key sizes
    • DRBG with true random number generator
    • PKA (Public Key Accelerator) to Assist in RSA/ECC processing for secure boot
  • Debugging security
    • Secure software controlled debug access
    • Security aware debugging

PRU Subsystem:

  • Dual-core Programmable Real-Time Unit Subystem (PRUSS) running up to 333MHz
  • Intended for driving GPIO for cycle accurate protocols such as additional:
    • General Purpose Input/Output (GPIO)
    • UARTs
    • I2C
    • External ADC
  • 16KByte program memory per PRU with SECDED ECC
  • 8KB data memory per PRU with SECDED ECC
  • 32KB general purpose memory with SECDED ECC
  • CRC32/16 HW accelerator
  • Scratch PAD memory with 3 banks of 30 x 32-bit registers
  • 1 Industrial 64-bit timer with 9 capture and 16 compare events, along with slow and fast compensation
  • 1 interrupt controller (INTC), minimum of 64 input events supported

High-Speed Interfaces:

  • Integrated Ethernet switch supporting (total 2 external ports)
    • RMII(10/100) or RGMII (10/100/1000)
    • IEEE1588 (Annex D, Annex E, Annex F with 802.1AS PTP)
    • Clause 45 MDIO PHY management
    • Packet Classifier based on ALE engine with 512 classifiers
    • Priority based flow control
    • Time sensitive networking (TSN) support
    • Four CPU H/W interrupt Pacing
    • IP/UDP/TCP checksum offload in hardware
  • Two USB2.0 Ports
    • Port configurable as USB host, USB peripheral, or USB Dual-Role Device (DRD mode)
    • Integrated USB VBUS detection

General Connectivity:

  • 9x Universal Asynchronous Receiver-Transmitters (UART)
  • 5x Serial Peripheral Interface (SPI) controllers
  • 6x Inter-Integrated Circuit (I2C) ports
  • 3x Multichannel Audio Serial Ports (McASP)
    • Transmit and Receive Clocks up to 50MHz
    • Up to 4/6/16 Serial Data Pins across 3x McASP with Independent TX and RX Clocks
    • Supports Time Division Multiplexing (TDM), Inter-IC Sound (I2S), and Similar Formats
    • Supports Digital Audio Interface Transmission (SPDIF, IEC60958-1, and AES-3 Formats)
    • FIFO Buffers for Transmit and Receive (256 Bytes)
    • Support for audio reference output clock
  • 3x enhanced PWM modules (ePWM)
  • 3x enhanced Quadrature Encoder Pulse modules (eQEP)
  • 3x enhanced Capture modules (eCAP)
  • General-Purpose I/O (GPIO), All LVCMOS I/O can be configured as GPIO
  • 3x Controller Area Network (CAN) modules with CAN-FD support
    • Conforms w/ CAN Protocol 2.0 A, B and ISO 11898-1
    • Full CAN FD support (up to 64 data bytes)
    • Parity/ECC check for Message RAM
    • Speed up to 8Mbps

Media and Data Storage:

  • 3x Multi-Media Card/Secure Digital (MMC/SD/SDIO) interface
    • 1x 8-bit eMMC interface up to HS200 speed
    • 2x 4-bit SD/SDIO interface up to UHS-I
    • Compliant with eMMC 5.1, SD 3.0 and SDIO Version 3.0
  • 1× General-Purpose Memory Controller (GPMC) up to 133MHz
    • Flexible 8- and 16-Bit Asynchronous Memory Interface With up to four Chip (22-bit address) Selects (NAND, NOR, Muxed-NOR, and SRAM)
    • Uses BCH Code to Support 4-, 8-, or 16-Bit ECC
    • Uses Hamming Code to Support 1-Bit ECC
    • Error Locator Module (ELM)
      • Used With the GPMC to Locate Addresses of Data Errors From Syndrome Polynomials Generated Using a BCH Algorithm
      • Supports 4-, 8-, and 16-Bit Per 512-Byte Block Error Location Based on BCH Algorithms
  • OSPI/QSPI with DDR / SDR support
    • Support for Serial NAND and Serial NOR flash devices
    • 4GBytes memory address support
    • XIP mode with optional on-the-fly encryption

Power Management:

  • Low power modes supported by Device/Power Manager
    • Partial IO support for CAN/GPIO/UART wakeup
    • DeepSleep
    • MCU Only
    • Standby
    • Dynamic frequency scaling for Cortex-A53

Optimal Power Management Solution:

  • Recommended TPS65219 Power Management ICs (PMIC)
    • Companion PMIC specially designed to meet device power supply requirements
    • Flexible mapping and factory programmed configurations to support different use cases

Boot Options:

  • UART
  • I2C EEPROM
  • OSPI/QSPI Flash
  • GPMC NOR/NAND Flash
  • Serial NAND Flash
  • SD Card
  • eMMC
  • USB (host) boot from Mass Storage device
  • USB (device) boot from external host (DFU mode)
  • Ethernet

Technology / Package:

  • 16nm technology
  • 13mm x 13mm, 0.5mm pitch, 425-pin FCCSP BGA (ALW)
  • 17.2mm x 17.2mm, 0.8mm pitch, 441-pin FCBGA (AMC)

The low-cost AM62x Sitara™ MPU family of application processors are built for Linux® application development. With scalable Arm® Cortex®-A53 performance and embedded features, such as dual-display support and 3D graphics acceleration, along with an extensive set of peripherals, making the AM62x device well-suited for a broad range of industrial and automotive applications while offering intelligent features and optimized power architecture.

Functional safety requirements can be addressed using the integrated Cortex-M4F cores and dedicated peripherals, which can all be isolated from the rest of the AM62x processor.

The 3-port Gigabit Ethernet switch has one internal port and two external ports with Time-Sensitive Networking (TSN) capable. An additional PRU module on the device enables real-time I/O capability for customer’s own use cases. In addition, the extensive set of peripherals included in AM62x enable system-level connectivity, such as USB, MMC/SD, Camera interface, OSPI, CAN-FD and GPMC for parallel host interface to an external ASIC/FPGA. The AM62x device also supports secure boot for IP protection with the built-in Hardware Security Module (HSM) and employs advanced power management support for portable and power-sensitive applications.

Products in the AM62x processor family:

  • AM625 – Human-machine Interaction SoC with Arm® Cortex®-A53-based edge AI and full-HD dual-display
  • AM625-Q1 – Automotive Display SoC with embedded safety for digital clusters
  • AM623 – Internet of Things (IoT) and Gateway SoC with Arm® Cortex®-A53-based object and gesture recognition
  • AM620-Q1 – Automotive Compute SoC with embedded safety for driver monitoring, networking and V2X systems

The low-cost AM62x Sitara™ MPU family of application processors are built for Linux® application development. With scalable Arm® Cortex®-A53 performance and embedded features, such as dual-display support and 3D graphics acceleration, along with an extensive set of peripherals, making the AM62x device well-suited for a broad range of industrial and automotive applications while offering intelligent features and optimized power architecture.

Functional safety requirements can be addressed using the integrated Cortex-M4F cores and dedicated peripherals, which can all be isolated from the rest of the AM62x processor.

The 3-port Gigabit Ethernet switch has one internal port and two external ports with Time-Sensitive Networking (TSN) capable. An additional PRU module on the device enables real-time I/O capability for customer’s own use cases. In addition, the extensive set of peripherals included in AM62x enable system-level connectivity, such as USB, MMC/SD, Camera interface, OSPI, CAN-FD and GPMC for parallel host interface to an external ASIC/FPGA. The AM62x device also supports secure boot for IP protection with the built-in Hardware Security Module (HSM) and employs advanced power management support for portable and power-sensitive applications.

Products in the AM62x processor family:

  • AM625 – Human-machine Interaction SoC with Arm® Cortex®-A53-based edge AI and full-HD dual-display
  • AM625-Q1 – Automotive Display SoC with embedded safety for digital clusters
  • AM623 – Internet of Things (IoT) and Gateway SoC with Arm® Cortex®-A53-based object and gesture recognition
  • AM620-Q1 – Automotive Compute SoC with embedded safety for driver monitoring, networking and V2X systems

Herunterladen Video mit Transkript ansehen Video

Weitere Informationen

  • Das Tool SysConfig zur Registerkonfiguration von DDR-Subsystemen finden Sie unter DDR-Subsystem-Register.
  • Ein interaktives und intuitives grafisches Tool zum Aktivieren, Konfigurieren und Generieren von Initialisierungscode für das Multiplexing von Bausteinkontakten bietet das PINMUX-Tool SysConfig.
  • Die erweiterte Sicherheitsdokumentation ist für AM62x verfügbar. Jetzt anfordern.

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein
AM620-Q1 AKTIV Computing-SoC für die Automobilindustrie mit integrierter Sicherheit für Fahrerüberwachung, Vernetzu Internet of Things (IoT) and gateway SoC with object and gesture recognition
AM62A3 AKTIV 1-TOPS-Vision-SoC mit RGB-IR-ISP für ein bis zwei Kameras, energieeffizient, Videoüberwachung, Autom AI vision acceleration

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 41
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet AM62x Sitara™ Processors datasheet (Rev. C) PDF | HTML 31 Okt 2025
* Errata AM62x Sitara Errata (Rev. G) PDF | HTML 30 Okt 2025
* User guide AM62x Sitara Processors Technical Reference Manual (Rev. C) PDF | HTML 29 Dez 2025
Application note Enabling Matter on Sitara MPU (Rev. A) PDF | HTML 24 Nov 2025
Application note AM62x Audio Design Guide PDF | HTML 20 Nov 2025
User guide Hardware Design Considerations for Custom Board Using AM625, AM623, AM620-Q1, AM625-Q1, AM625SIP Processor (Rev. E) PDF | HTML 24 Okt 2025
Application note Sitara Processor Power Distribution Networks: Implementation and Analysis (Rev. H) PDF | HTML 17 Okt 2025
Application note AM625x/AM623x and AM62Lx Hardware Migration Guide PDF | HTML 06 Okt 2025
User guide AM62x, AM62Ax, AM62D-Q1 and AM62Px Processor Family Schematic, Design Guidelines and Review Checklist (Rev. I) PDF | HTML 17 Sep 2025
User guide AM625, AM623, AM620-Q1, AM625-Q1, AM625SIP Processor Family Schematic, Design Guidelines and Review Checklist (Rev. B) PDF | HTML 16 Sep 2025
Application note AM62x, AM62Ax, AM62Px, AM62Lx Spread-Spectrum Clocking PDF | HTML 08 Sep 2025
Application note Custom Board Design and Simulation Guidelines for Processor High Speed Parallel Interfaces (Rev. A) PDF | HTML 05 Sep 2025
Application note Powering the AM62x with the TPS65219 PMIC (Rev. C) PDF | HTML 18 Aug 2025
Functional safety information AM6x, AM24x Software Diagnostics Library TÜV SÜD Functional Safety Certificate for 9.2.0 SDK (Rev. A) 17 Jul 2025
Application note Processors Tools Overview PDF | HTML 16 Jun 2025
Application note AM62x, AM62Lx DDR Board Design and Layout Guidelines (Rev. C) PDF | HTML 05 Mär 2025
Application note Display Interfaces: A Comprehensive Guide to Sitara MPU Visualization Designs (Rev. A) PDF | HTML 28 Feb 2025
White paper Securing Arm-Based Application Processors (Rev. F) PDF | HTML 26 Feb 2025
Application note MCAN Debug Guide PDF | HTML 18 Feb 2025
Application note Microcontroller Abstraction Layer on Jacinto™ and Sitara™ Embedded Processors PDF | HTML 28 Jan 2025
Application note AM62x PCB Escape Routing (Rev. A) PDF | HTML 12 Dez 2024
Application note Sitara™ AM62x Benchmarks (Rev. B) PDF | HTML 12 Dez 2024
Application note Basic Ethernet Interface Debug With Linux PDF | HTML 11 Okt 2024
Product overview AM623 and AM625 Arm Cortex A53 Microprocessor PDF | HTML 08 Okt 2024
Application note Minimal Platform Development on AM62x Devices (Rev. A) PDF | HTML 24 Sep 2024
Application note Estimating Application Useful Lifetimes for Sitara MPU Products – A Design-Based Methodology PDF | HTML 27 Jun 2024
Application brief Top Five Design Considerations for Smart Multi-display Systems PDF | HTML 22 Mär 2024
Application note AM62x Power Consumption PDF | HTML 16 Feb 2024
Technical article Three key considerations for the next generation of HMI (Rev. A) PDF | HTML 23 Jan 2024
Application note Using TSN Ethernet Features to Improve Timing in Industrial Ethernet Controllers PDF | HTML 15 Nov 2023
Application brief Keyword Spotting Using AI at the Edge With Sitara Processors PDF | HTML 28 Sep 2023
White paper Time Sensitive Networking for Industrial Automation (Rev. C) 31 Jul 2023
Application note AM62x Maximum Current Ratings PDF | HTML 18 Apr 2023
Application note High-Speed Interface Layout Guidelines (Rev. J) PDF | HTML 24 Feb 2023
Application note PRU-ICSS Feature Comparison (Rev. G) PDF | HTML 11 Okt 2022
Application note AM62x (AMC) PCB Escape Routing PDF | HTML 22 Sep 2022
Product overview Voltage Translation Application Quick Reference PDF | HTML 28 Jun 2022
Technical article Top 3 design considerations for EV charging PDF | HTML 20 Jun 2022
White paper Für energieeffiziente integrierte Systeme mit AM62x-Prozessoren PDF | HTML 13 Jun 2022
Application note AM62x Extended Power-On Hours PDF | HTML 13 Mai 2022
Application note AM62x Power Estimation Tool PDF | HTML 08 Apr 2022

Design und Entwicklung

Lösungen für die Stromversorgung

Verfügbare Lösungen für die Stromversorgung für den AM623 finden. TI bietet Stromversorgungslösungen für Ein-Chip-Systeme (SoCs), Prozessoren, Mikrocontroller, Sensoren und feldprogrammierbare Gate-Arrays (FPGAs) von TI und von Fremdherstellern an.

Evaluierungsplatine

SK-AM62B-P1 — AM62x-Starterkit-EVM mit PMIC

Das Evaluierungsmodul (EVM) des SK-AM62B-P1 Starterkits (SK) ist eine eigenständige Test- und Entwicklungsplattform, die auf dem SoC (System-on-Chip) AM62x basiert. AM62x Prozessoren bestehen aus einem 64 Bit-Arm®-Cortex®-A53-Mikroprozessor mit vier Kernen und einer Arm Cortex-M4F-MCU mit einem (...)

Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

AAEON-3P-PICOAM62 — AAEON Pico-ITX-Platine mit TI AM62x Sitara-Prozessoren

Der PICO-AM62 und der SRG-AM62 auf Basis der AM62x Sitara™-Prozessoren von Texas Instruments™ bieten eine einzigartige Kombination aus skalierbarer Arm® Cortex®-A53-Leistung, Kosteneffizienz und 20 Jahren Lebensdauer. PICO-AM62 und SRG-AM62 nutzen die Verarbeitungsfunktionen der Plattform und die (...)

Evaluierungsplatine

AAEON-3P-SRGAM62 — AAEON Standard-RISC-Gateway mit TI AM62x Sitara-Prozessoren

Der PICO-AM62 und der SRG-AM62 auf Basis der AM62x Sitara™-Prozessoren von Texas Instruments™ bieten eine einzigartige Kombination aus skalierbarer Arm® Cortex®-A53-Leistung, Kosteneffizienz und 20 Jahren Lebensdauer. PICO-AM62 und SRG-AM62 nutzen die Verarbeitungsfunktionen der Plattform und die (...)

Evaluierungsplatine

BEAGL-PLAY-SBC — BeaglePlay® Einplatinencomputer der BeagleBoard.org Foundation auf AM62x-Basis

BeaglePlay ist ein Open-Source-Einplatinencomputer, der das Hinzufügen von Sensoren, Aktuatoren, Indikatoren, menschlichen Schnittstellen und Konnektivität zu einem zuverlässigen eingebetteten System vereinfacht. Er bietet neben einem leistungsstarken Prozessor mit 64-Bit-Architektur und vier (...)

Evaluierungsplatine

CONCL-3P-RCHD-AM62 — Conclusive Engineering RCHD-AM62 System-on-Module für AM623- und AM625-Prozessoren

Kompaktes Kraftpaket für erweiterte Konnektivität

Das RCHD-AM62 System on Module ist in einem kompakten SO-DIMM-Formfaktor mit 82 mm x 45 mm untergebracht. Der RCHD-AM62 bietet leistungsstarke Konnektivitätsoptionen, einschließlich Dual 1 Gbit/s Ethernet, Wi-Fi® und Bluetooth® v4.1. Der einzelne (...)

Evaluierungsplatine

CRLNK-3P-MITYSOM-AM62 — Critical Link MitySOM-AM62 system on module for AM623 and AM625 Arm Cortex-A53 1.4-GHz processors

The module supports eMMC flash, Octal or Quad SPI NOR flash, and DDR4 RAM memory subsystems"
Brian's version: "The module includes on-board DDR4 RAM memory, with the option to populate eMMC Flash and Octal or Quad SPI NOR flash nonvolatile memory.

Evaluierungsplatine

EMA-3P-MED62X — Guangzhou Embedded Machine Technology EMA MED62X Hauptplatine für medizinischen Multiparameter-Monit

Diese medizinische Multiparameter-Monitorlösung verwendet unseren AM62x-Hauptsteuerchip, der für die Bedürfnisse der Monitorprodukte entwickelt wurde, sowie bis zu 8 serielle Schnittstellen, eine Gigabit-Netzwerkkarte, USB 2.0, eine LVDS- und HDMI-High-Definition-Displayschnittstelle, eine (...)
Evaluierungsplatine

ENGCM-3P-ICORE-AM62X — Engicam i.Core-AM62x SO-DIMM system on module for AM623 and AM625 Arm Cortex-A53 1.4-GHz processors

The new i.Core AM62x system on module is based on the AM623 and AM625 processor device families, and the module is equipped to optimally take advantage of the 1-4 Arm® Cortex®-A53 CPU cores at up to 1.4-GHz and Cortex-M4F MCU co-processor at up to 400MHz. The cost-optimized module will (...)

Evaluierungsplatine

EZURI-3P-CARBONAM62 — Ezurio CarbonAM62 SOM, OSM-MF-System auf Modul für AM623- und AM625-Prozessoren

Ezurio is a leading manufacturer and connectivity expert for wireless modules and system on modules. The CarbonAM62 OSM-MF family is powered by Texas Instrument's AM62x processor family, TI's TPS65219 PMIC, our Sona Wi-Fi 6 and Bluetooth wireless modules. Designed to meet the processing and (...)

Von: Ezurio
Evaluierungsplatine

FORLX-3P-FET6254-C — Forlinx® FET6254-C System-on-Module für AM62x Quad Arm®-Cortex-®-A53 1,4-GHz-Prozessor

Die Forlinx Embedded Technology konzentriert sich auf die Konzeption, Entwicklung und Herstellung von Lösungen für eingebettete Systeme. Seit 2007 hat sich Forlinx der Bereitstellung von benutzerfreundlichen, kosteneffizienten, stabilen und fortschrittlichen eingebetteten Lösungen verschrieben, die (...)

Evaluierungsplatine

HZHYT-3P-HZ-CORE-AM62X — HZHYTECH HZ-CORE-AM62x system on module for AM623 and AM625 Arm Cortex-A53 1.4-GHz processors

The HZ-CORE-AM62X system on module (SOM) is a solder-down "stamp" PCB from HZHYTECH based on AM623 and AM625 processors.

The SOM has low power consumption, low cost and optimal integration, making it widely usable in a variety of applications from high-precision medical measuring instruments, data (...)

Von: HZHYTECH
Evaluierungsplatine

IESY-3P-OSM-LF-AM62 — IOSM-LF (iesy GmbH) System-on-Module für AM623 und AM625-Prozessoren mit Arm Cortex-A53, GPU

Mit einer Größe von 45 mm x 45 mm bietet der iesy AM62xx OSM-LF eine Vielzahl von Anwendungsmöglichkeiten. Das hier verwendete Betriebssystem ist ein Open-Source-Linux auf Basis von Yocto. Mit dem AM62x-Prozessor lassen sich Systeme mit Hochsicherheitsfunktionen für Industrie- und (...)

Von: iesy GmbH
Evaluierungsplatine

MYIR-3P-YM62X — MYIR industrial-grade system on module for AM62x Arm Cortex-A53 processors

MYIR Tech Limited is a global provider of ARM based CPU Modules, industrial computing boards and OEM/ODM services for embedded applications. MYIR is fully skilled to design, prototype, manufacturing, testing and technical support which will provide customers one-stop service to acceleratetheir (...)

Evaluierungsplatine

OCTVO-3P-OSD62X — Octavo Systems OSD62x system-in-package for AM623 and AM625 Arm® Cortex®-A53 1.4-GHz processors

The OSD62x SiP technology allows designers to build a smaller generation of a variety of products in the same applications where the AM62x device is commonly used, including: building automation, factory automation and control, IoT gateway, edgeAI, and HMI. The SiP integrates the low-power, (...)

Evaluierungsplatine

PHYTC-3P-KIT-AM62 — PHYTEC® phyBOARD®-AM62x Entwicklungskit mit AM625 Arm-basiertem® Sitara-Prozessor™

PHYTEC ist ein branchenführender Anbieter und Integrator von System-on-Modules (SOMs), Embedded-Middleware und Designservices, die es Kunden ermöglichen, komplexe Produkte schnell und einfach auf den Markt zu bringen. Sie begleiten ihre Kunden von der Entwicklung bis zur Produktion und nutzen dabei (...)

Von: PHYTEC
Evaluierungsplatine

TECHN-3P-SOM-AXON-AM62 — Technexion AXON-AM62x system on module for AM6254 quad Cortex-A53 1.4 GHz processor

The AXON-AM62x system-on-module (SOM) is the edge processing solution for applications requiring the highest amount of I/O for sensory input, actuation control and edge processing.  At just 37 mm × 58 mm, with a PCB footprint optimized board-to-board connector, AXON modules integrate the (...)

Von: TechNexion
Evaluierungsplatine

TQ-3P-SOM-TQMA62XX — TQ-Group TQMa62xx system on modules for AM623 and AM625 Arm Cortex-A53 1.4-GHz processors

The embedded module TQMa62xx, is based on the processor family AM623 and AM625 processor family. This module is designed to use the pin-compatible processors on one module design. This module is ideal for applications that require advanced computing power and scalable graphics performance. The (...)

Von: TQ-Group
Evaluierungsplatine

TRDX-3P-VERDIN-AM62 — Toradex Verdin AM62 system on module for AM625 Arm Cortex-A53 processor with GPU

The Verdin AM62 is an attractive entry point to the Verdin ecosystem with the lowest total cost of ownership, featuring the AM62x processors with up to 4x Arm Cortex-A53 cores. Pin-compatible with the Verdin SoM family. Integrated OTA remote updates, device monitoring, and remote access with (...)

Von: Toradex
Evaluierungsplatine

TRONL-3P-SOM-TL62 — Tronlong® SOM-TL62x System-on-Module für AM625 Quad Arm®-Cortex-®-A53 1,4-GHz-Prozessor

Guangzhou Tronlong Electronic Technology Co. Ltd. wurde 2013 als Anbieter von eingebetteten Produktplattformen gegründet und hat sich seit jeher der Entwicklung hochwertiger industrieller Kernplatinen zusammen mit Evaluierungskits und Projektdienstleistungen verschrieben. Der Hauptsitz von Tronlong (...)

Evaluierungsplatine

WEATH-3P-WTC-AM6254S — Weathink® WTC-AM6254S system module for AM62x quad Arm® Cortex®-A53 1.4-GHz processor

Hangzhou Weathink Electronics Co., Ltd. is a technology -based enterprise focusing on providing intelligent display and industrial IoT solutions for industrial and industry users. It integrates research and development, design, customization, production, and sales.

The company has the first -class (...)

Evaluierungsplatine

ZLG-3P-M62XX — ZLG Forlinx M62xx System-on-Module für Quad Cortex-A53 Prozessor AM62xx mit 1,4 GHz

Das Core Board der M62xx-T-Serie ist ein leistungsstarkes Embedded-Core Board, das von ZLG auf Basis des TI-Prozessors der Serie AM62x entwickelt wurde. Auf der Platine sind externe Bausteine wie DDR4, eMMC, QSPI Flash, Hardware-Watchdog und ein WLAN-/Bluetooth-Modul (optional) integriert. Der auf (...)

Debug-Tastkopf

TMDSEMU110-U — XDS110 JTAG-Debug-Tastkopf

Der XDS110 von Texas Instruments ist eine neue Klasse von Debug-Tastkopf (Emulator) für Embedded-Prozessoren von TI. Der XDS110 ersetzt die XDS100-Familie und unterstützt eine größere Anzahl von Standards (IEEE1149.1, IEEE1149.7, SWD) in einem einzigen Pod. Alle XDS-Debug-Tastköpfe unterstützen (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Debug-Tastkopf

TMDSEMU200-U — XDS200-USB-Debug-Tastkopf

Der XDS200 ist ein Debug-Tastkopf (Emulator) zum Debugging von Embedded-Bausteinen von TI. Für die meisten Bausteine wird die Verwendung der neueren, kostengünstigeren XDS110 (www.ti.com/tool/TMDSEMU110-U) empfohlen. Der XDS200 unterstützt eine große Zahl von Standards (IEEE1149.1, IEEE1149.7, SWD) (...)

Debug-Tastkopf

TMDSEMU560V2STM-U — XDS560v2 System-Trace-USB-Debug-Tastkopf

Der XDS560v2 ist die leistungsstärkste Debug-Sonde aus der XDS560™ Familie von Debug-Sonden und unterstützt sowohl den traditionellen JTAG-Standard (IEEE1149.1) als auch cJTAG (IEEE1149.7).  Bitte beachten: Diese Lösung unterstützt kein Serial Wire Debug (SWD).

Alle XDS-Debug-Tastköpfe unterstützen (...)

Debug-Tastkopf

TMDSEMU560V2STM-UE — XDS560v2 System-Trace-USB-und Ethernet-Debug-Tastkopf

The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors that (...)

Debug-Tastkopf

LB-3P-TRACE32-ARM — Debug- und Trace-System Lauterbach TRACE32® für Arm®-basierte Mikrocontroller und Prozessoren

Die TRACE32®-Tools von Lauterbach sind eine Suite hochmoderner Hardware- und Softwarekomponenten, mit denen Entwickler alle Arten von Arm®-basierten Mikrocontrollern und Prozessoren analysieren, optimieren und zertifizieren können. Die weltweit anerkannten Debugging- und Trace-Lösungen für (...)

Software-Entwicklungskit (SDK)

MCU-PLUS-SDK-AM62X MCU+ SDK for AM62x – RTOS, No-RTOS

The AM62 processor Linux® software development kits (SDKs) are unified software platforms for embedded processors providing easy setup and fast out-of-box access to benchmarks and demonstrations.

All releases of this SDK are consistent across TI's broad portfolio for which they are provided, (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Durchsuchen Download-Optionen
Software-Entwicklungskit (SDK)

PROCESSOR-SDK-LINUX-AM62X Processor SDK Linux for AM62x

The AM62 processor Linux® software development kits (SDKs) are unified software platforms for embedded processors providing easy setup and fast out-of-box access to benchmarks and demonstrations.

All releases of this SDK are consistent across TI's broad portfolio for which they are provided, (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Download-Optionen
Software-Entwicklungskit (SDK)

PROCESSOR-SDK-LINUX-RT-AM62X Processor SDK RT-Linux for AM62x

The AM62 processor Linux® software development kits (SDKs) are unified software platforms for embedded processors providing easy setup and fast out-of-box access to benchmarks and demonstrations.

All releases of this SDK are consistent across TI's broad portfolio for which they are provided, (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Download-Optionen
Software-Entwicklungskit (SDK)

PROCESSOR-SDK-QNX-AM62X QNX software development kit for AM62X Sitara™ processors

The AM62 processor Linux® software development kits (SDKs) are unified software platforms for embedded processors providing easy setup and fast out-of-box access to benchmarks and demonstrations.

All releases of this SDK are consistent across TI's broad portfolio for which they are provided, (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Anwendungssoftware und Frameworks

AM62X-RESTRICTED-DOCS-SAFETY AM62X safety content

AM62X safety content
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Anwendungssoftware und Frameworks

EB-3P-TRESOS — Elektrobit EB tresos Classic AUTOSAR-Software

Mit jahrzehntelanger Erfahrung auf dem Gebiet der Basissoftware trägt Elektrobit mit seiner EB tresos Produktlinie und den maßgeschneiderten Classic AUTOSAR-Lösungen dazu bei, die spezifischen Anforderungen jedes Automobilherstellers zu erfüllen und modernste Software zu liefern. Elektrobit bietet (...)
Von: Elektrobit
Firmware

DDR-MARGIN-FW Firmware and scripts to measure system DDR margin

The DDR margin firmware and supporting scripts allow visualization and measurement of system margin in the DDR interface on board. These tools enable probe-less measurement of critical data signals to understand the integrity and robustness of the interface.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Download-Optionen
GUI für Evaluierungsmodul (EVM)

QT-3P-GUI — Qt-Group graphical user interface (GUI) software example demos for Arm-based processors

These Qt demos highlight the simplicity of bridging/importing graphics assets to Qt Design Studio where interactivity, animations, and pixel perfect UI/UX design is represented on the functioning display. With the QML code generated from Qt Design Studio, the HMI display created in Qt Design Studio (...)
Von: QT Group
Erste Schritte

TI-DEVELOPER-ZONE Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO Code Composer Studio integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.

(...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Start Download-Optionen
IDE, Konfiguration, Compiler oder Debugger

CLOCKTREE-AM62X Clock tree configuration for AM62x


The Clock Tree Tool (CTT) for ARM Processors & Digital Signal Processors is an interactive configuration software tool that provides information about device clock tree architecture. This tool allows visualization of the device clock tree. It can also be used to determine the exact register (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

IDE, Konfiguration, Compiler oder Debugger

DDR-CONFIG-AM62 DDR Configuration Tool

This SysConfig based tool simplifies the process of configuring the DDR Subsystem Controller and PHY to interface to SDRAM devices. Based on the memory device, board design, and topology the tool outputs files to initialize and train the selected memory.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Start Download-Optionen
IDE, Konfiguration, Compiler oder Debugger

EDGE-AI-STUDIO Edge AI Studio

Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers and radar sensors. Whether developing a proof of concept using a model from the TI Model Zoo or leveraging your own model, Edge AI Studio provides the (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

IDE, Konfiguration, Compiler oder Debugger

K3-RESOURCE-CONFIGURATION Resource partitioning tool for multi core SOCs

Also known as the k3-respart-tool, the Resource Configuration tool allows for configuration of various system level parameters and generate the necessary data to be fed into software components
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

IDE, Konfiguration, Compiler oder Debugger

SYSCONFIG Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Start Download-Optionen
Onlineschulungen

AM62-ACADEMY AM62x Academy

AM62x Academy is designed to simplify and accelerate custom AM62x development.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Betriebssystem (BS)

GHS-3P-INTEGRITY-RTOS — Green Hills INTEGRITY RTOS

The flagship of Green Hills Software operating systems—the INTEGRITY RTOS—is built around a partitioning architecture to provide embedded systems with total reliability, absolute security, and maximum real-time performance. With its leadership pedigree underscored by certifications in a (...)
Betriebssystem (BS)

GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS

The µ-velOSity™ Safety RTOS is the smallest of Green Hills Software's real-time operating systems and was designed especially for microcontrollers. It supports a wide range of TI processor families using the Arm® Cortex-M or Cortex-R cores as a main CPU or as a co-processors (...)
Betriebssystem (BS)

PIONX-3P-SW-EVSE — PIONIX® EVerest Open-Source-Betriebssystem für Ladestationen für Elektrofahrzeuge (EV)

EVerest ist eine auf Linux basierende Open-Source-Software für AC- und DC-Ladestationen. 

EVerest entspricht allen relevanten Ladestandards wie OCPP 1.6 und 2.0, ISO 15118, DIN SPEC 70121, EN 61851 und allen zukünftigen Normen. Durch Hinzufügen von Benutzerschnittstellen und anderen Funktionen kann (...)

Betriebssystem (BS)

TRZN-3P-TORIZON-OS — Einsatzbereite Industrial Embedded-Linux-Verteilung Torizon OS

Torizon OS ist ein kostenloses, quelloffenes Industrial Embedded-Linux-Betriebssystem, das auf die Vereinfachung der Entwicklung und Wartung von Produkten ausgelegt ist, die hohe Zuverlässigkeit und Sicherheit erfordern. Neben anderen zentralen Funktionen bietet es eine optimale Containerlaufzeit (...)
Von: Torizon
Betriebssystem (BS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS Vorzertifiziertes Sicherheits-RTOS

SAFERTOS® ist ein einzigartiges Echtzeitbetriebssystem für Embedded-Prozessoren. Er ist vom TÜV SÜD nach den Normen IEC 61508 SIL3 und ISO 26262 ASILD vorzertifiziert. SAFERTOS® wurde vom Expertenteam von WHIS speziell auf Sicherheit ausgelegt und wird weltweit in sicherheitskritischen Anwendungen (...)
Support-Software

MCW-3P-FACEREC — MulticoreWare software for face recognition, authentication and human behavior analytics

MulticoreWare is a software engineering product and services company that combines its expertise in artificial intelligence and embedded systems to create Linux-based solutions to solve real world challenges in imaging, building automation, retail, authentication, smart city and a variety of (...)
Support-Software

PLMR-3P-PEODET — Plumerai people detection - accurate and efficient AI model

Plumerai makes deep learning tiny and radically more efficient to enable inference at reduced compute needs on low cost and low-power consumption hardware. Plumerai focuses on full stack, and has offices in London, Amsterdam and Warsaw.

Plumerai has developed a complete software solution for (...)

Support-Software

VCTR-3P-MICROSAR — Vector MICROSAR AUTOSAR-Software für Mikrocontroller und Hochleistungscomputer (HPCs)

Die MICROSAR- und DaVinci-Produktfamilien vereinfachen die Steuergeräte-Entwicklung mit ausgefeilter Embedded-Software und leistungsstarken Entwicklungswerkzeugen für Mikrocontroller und HPCs. Mit fortschrittlicher Infrastruktursoftware schaffen Sie eine optimale Basis für Ihre Steuergeräte und (...)
Support-Software

VLAB-3P-V-EVM — Virtuelle ASTC VLAB-Entwicklungsplattformen und -Tools

VLAB Works ist der Branchenführer in der Softwaretechnologie für die Modellierung, Simulation und virtuelle Prototypenentwicklung von eingebetteten elektronischen Systemen. VLAB Technologien und Lösungen ermöglichen die Anwendung von Automatisierung und agilen Prozessen bei der Entwicklung von (...)
Von: VLAB Works
Simulationsmodell

AM62x BSDL Model

SPRM767.ZIP (20 KB) - BSDL Model
Simulationsmodell

AM62x IBIS Model (Rev. D)

SPRM766D.ZIP (1970 KB) - IBIS Model
Simulationsmodell

AM62x IBIS-AMI Model

SPRM765.ZIP (23853 KB) - IBIS-AMI Model
Simulationsmodell

AM62x Thermal Model (Rev. A)

SPRM768A.ZIP (1 KB) - Thermal Model
Berechnungstool

AM62X-PET-CALC AM62x Power Estimation Tool

The AM62x power-estimation tool (PET) spreadsheet allows the user to calculate power consumption estimates based on measured and simulated data. Estimates are provided as is and are not ensured within a specified precision. Power consumption depends on electrical parameters, silicon process (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Referenzdesigns

TIDA-010239 — Referenzdesign der AC-Level-2-Ladeplattform

Electric vehicle supply equipment (EVSE) facilitates power delivery to electric vehicles safely from the grid. An EVSE control system consists of an auxiliary power stage, an off-board AC/DC high-power stage (only in DC charging stations), energy metering unit, AC and DC residual current detector, (...)
Design guide: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
FCCSP (ALW) 425 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos