Home Sensoren mmWave-Radarsensoren mmWave-Radarsensoren für die Automobilindustrie
Home
Sensoren
mmWave-Radarsensoren
mmWave-Radarsensoren für die Automobilindustrie

AWR2944P

AKTIV

Ein-Chip-Radarsensor, 76 bis 81 GHz, für die Automobilindustrie mit verbesserter HF- und Rechenle

Jetzt bestellen
Datenblatt
Benutzerhandbücher

AWR2944P

AKTIV
Jetzt bestellen

Produktdetails

Frequency range 76 - 81 GHz Number of receivers 4 Number of transmitters 4 ADC sampling rate (max) (Msps) 45 Arm CPU Arm Cortex-R5F at 400MHz Interface type 1Gig Ethernet, 2 CAN-FD, Ethernet, I2C DSP type C66x DSP 450MHz Hardware accelerators Radar hardware accelerator Edge AI enabled Yes RAM (kByte) 4500 Rating Automotive Operating temperature range (°C) -40 to 140 TI functional safety category Functional Safety-Compliant Security Cryptographic acceleration, Device attestation & anti-counterfeit, Hardware-enforced isolation, Secure boot, Secure firmware & software update, Software IP protection Power supply solution LP87745-Q1
Frequency range 76 - 81 GHz Number of receivers 4 Number of transmitters 4 ADC sampling rate (max) (Msps) 45 Arm CPU Arm Cortex-R5F at 400MHz Interface type 1Gig Ethernet, 2 CAN-FD, Ethernet, I2C DSP type C66x DSP 450MHz Hardware accelerators Radar hardware accelerator Edge AI enabled Yes RAM (kByte) 4500 Rating Automotive Operating temperature range (°C) -40 to 140 TI functional safety category Functional Safety-Compliant Security Cryptographic acceleration, Device attestation & anti-counterfeit, Hardware-enforced isolation, Secure boot, Secure firmware & software update, Software IP protection Power supply solution LP87745-Q1
FCCSP (ALT) 266 1728 mm² (12 mm × 144 mm) FCCSP (AMX) 278 2187 mm² (13.5 mm × 162 mm)
  • FMCW transceiver
    • Integrated PLL, transmitter, receiver, baseband and ADC
    • 76GHz to 81GHz coverage with 5GHz available BW with 4 receive and 4 transmit channels
      • AWR2944P/AWR2944-ECO/AWR2944LC: PCB interface to antennas
      • AWR2E44P/AWR2E44-ECO/AWR2E44LC: Launch-on-Package (LOP) interface to antennas
    • Per transmit phase shifter
    • Ultra-accurate chirp engine via fractional-N PLL
    • TX power
      • AWR2944P: 14dBm

      • AWR2944-ECO/AWR2944LC: 13.5dBm

      • AWR2E44P: 13.5dBm

      • AWR2E44-ECO/AWR2E44LC: 12.5dBm

    • RX noise figure
      • AWR2944P: 10.5dB
      • AWR2944-ECO/AWR2944LC: 12dB
      • AWR2E44P: 11dB
      • AWR2E44-ECO/AWR2E44LC: 12.5dB
    • Phase noise at 1MHz
      • VCO1: -96dBc/Hz (76 to 77GHz)
      • VCO2: -95dBc/Hz (76 to 81GHz)
  • Processing elements
    • Arm Cortex-R5F core (supports lock step operation) @400MHz
    • TI digital signal processor C66x @450MHz

      Not applicable to 2944LC and AWR2E44LC

    • TI radar hardware accelerator (HWA2.1) for operations like FFT, log magnitude, and memory compression
    • Multiple EDMA instances for data movement
    • Programmable embedded hardware security module (HSM) using ArmCortex-M4
    • Second Arm Cortex M4 core in the DSS (DSP Subsystem), controlling and configuring the HWA2.1
  • Functional safety compliant targeted
    • Developed for functional safety applications
    • Documentation will be available to aid ISO 26262 functional safety system design
    • Hardware integrity up to ASIL B targeted
  • Other interfaces available to user application (on select part numbers)
    • Up to 9 ADC channels based on device variant
    • 2 SPIs | 4 UARTs | I2C | GPIOs | 3 EPWMs
    • 4-lane Aurora LVDS interface for raw ADC data and debug instrumentation
    • 2-lane CSI2 Rx for playback of captured data
  • On-Chip RAM (split between DSP, MCU, and shared L3)
    • 3MB to 4.5MB of ‘On Chip’ RAM (AWR2944P/AWR2E44P: 4.5MB, AWR2944-ECO/AWR2E44-ECO: 4MB, AWR2944LC//AWR2E44LC: 3MB)
  • Host interface
    • 2x CAN-FD
    • 10/100/1000Mbps Ethernet
      • 10/100Mbps for the AWR2944-ECO/AWR2E44-ECO
      • Not applicable to AWR2944LC/AWR2E44LC
  • Supports a serial flash memory interface (loading user application from QSPI flash memory)
  • Device security (on select part numbers)
    • Secure authenticated and encrypted boot support
    • Customer programmable root keys, symmetric keys (256 bit), asymmetric keys (up to RSA-4K or ECC-512) with key revocation capability
    • Cryptographic hardware accelerators: PKA with ECC, AES (up to 256 bit), SHA (up to 512 bit), TRNG/DRBG, and SM2, SM3, SM4 (Chinese crypto algorithms)
  • Built-in firmware (ROM) and Self-calibrating system across process and temperature
  • AEC-Q100 qualified
  • Advanced features
    • Embedded self-monitoring with no external processor involvement
    • Embedded interference detection capability
  • Power management
    • On-die LDO network for enhanced PSRR
    • LVCMOS IO supports dual voltage 3.3V and 1.8V
  • Clock source
    • 50/40MHz crystal with internal oscillator
    • Supports externally driven oscillator or clock (square or sine wave) at 50/40MHz
    • 25MHz external clock to eliminate external crystal oscillator for Ethernet PHY when using the 50MHz clock.
  • Optimal Power Management Solution
    • Recommended LP87745-Q1 Power Management ICs (PMIC)
      • Companion PMIC specially designed to meet device power supply requirements
      • Flexible mapping and factory programmed configurations to support different use cases
  • Cost-reduced hardware design using 0.65mm pitch FCCSP package
    • AWR2944P/AWR2944-ECO/AWR2944LC: 12mm × 12mm
    • AWR2E44P/AWR2E44-ECO/AWR2E44LC: 13.5mm × 12mm
  • Supports automotive junction temperature operating range of –40°C to 140°C
  • FMCW transceiver
    • Integrated PLL, transmitter, receiver, baseband and ADC
    • 76GHz to 81GHz coverage with 5GHz available BW with 4 receive and 4 transmit channels
      • AWR2944P/AWR2944-ECO/AWR2944LC: PCB interface to antennas
      • AWR2E44P/AWR2E44-ECO/AWR2E44LC: Launch-on-Package (LOP) interface to antennas
    • Per transmit phase shifter
    • Ultra-accurate chirp engine via fractional-N PLL
    • TX power
      • AWR2944P: 14dBm

      • AWR2944-ECO/AWR2944LC: 13.5dBm

      • AWR2E44P: 13.5dBm

      • AWR2E44-ECO/AWR2E44LC: 12.5dBm

    • RX noise figure
      • AWR2944P: 10.5dB
      • AWR2944-ECO/AWR2944LC: 12dB
      • AWR2E44P: 11dB
      • AWR2E44-ECO/AWR2E44LC: 12.5dB
    • Phase noise at 1MHz
      • VCO1: -96dBc/Hz (76 to 77GHz)
      • VCO2: -95dBc/Hz (76 to 81GHz)
  • Processing elements
    • Arm Cortex-R5F core (supports lock step operation) @400MHz
    • TI digital signal processor C66x @450MHz

      Not applicable to 2944LC and AWR2E44LC

    • TI radar hardware accelerator (HWA2.1) for operations like FFT, log magnitude, and memory compression
    • Multiple EDMA instances for data movement
    • Programmable embedded hardware security module (HSM) using ArmCortex-M4
    • Second Arm Cortex M4 core in the DSS (DSP Subsystem), controlling and configuring the HWA2.1
  • Functional safety compliant targeted
    • Developed for functional safety applications
    • Documentation will be available to aid ISO 26262 functional safety system design
    • Hardware integrity up to ASIL B targeted
  • Other interfaces available to user application (on select part numbers)
    • Up to 9 ADC channels based on device variant
    • 2 SPIs | 4 UARTs | I2C | GPIOs | 3 EPWMs
    • 4-lane Aurora LVDS interface for raw ADC data and debug instrumentation
    • 2-lane CSI2 Rx for playback of captured data
  • On-Chip RAM (split between DSP, MCU, and shared L3)
    • 3MB to 4.5MB of ‘On Chip’ RAM (AWR2944P/AWR2E44P: 4.5MB, AWR2944-ECO/AWR2E44-ECO: 4MB, AWR2944LC//AWR2E44LC: 3MB)
  • Host interface
    • 2x CAN-FD
    • 10/100/1000Mbps Ethernet
      • 10/100Mbps for the AWR2944-ECO/AWR2E44-ECO
      • Not applicable to AWR2944LC/AWR2E44LC
  • Supports a serial flash memory interface (loading user application from QSPI flash memory)
  • Device security (on select part numbers)
    • Secure authenticated and encrypted boot support
    • Customer programmable root keys, symmetric keys (256 bit), asymmetric keys (up to RSA-4K or ECC-512) with key revocation capability
    • Cryptographic hardware accelerators: PKA with ECC, AES (up to 256 bit), SHA (up to 512 bit), TRNG/DRBG, and SM2, SM3, SM4 (Chinese crypto algorithms)
  • Built-in firmware (ROM) and Self-calibrating system across process and temperature
  • AEC-Q100 qualified
  • Advanced features
    • Embedded self-monitoring with no external processor involvement
    • Embedded interference detection capability
  • Power management
    • On-die LDO network for enhanced PSRR
    • LVCMOS IO supports dual voltage 3.3V and 1.8V
  • Clock source
    • 50/40MHz crystal with internal oscillator
    • Supports externally driven oscillator or clock (square or sine wave) at 50/40MHz
    • 25MHz external clock to eliminate external crystal oscillator for Ethernet PHY when using the 50MHz clock.
  • Optimal Power Management Solution
    • Recommended LP87745-Q1 Power Management ICs (PMIC)
      • Companion PMIC specially designed to meet device power supply requirements
      • Flexible mapping and factory programmed configurations to support different use cases
  • Cost-reduced hardware design using 0.65mm pitch FCCSP package
    • AWR2944P/AWR2944-ECO/AWR2944LC: 12mm × 12mm
    • AWR2E44P/AWR2E44-ECO/AWR2E44LC: 13.5mm × 12mm
  • Supports automotive junction temperature operating range of –40°C to 140°C

The AWR2944P/AWR2E44P is a "Performance" expansion to the AWR2944 portfolio with enhanced RF and compute performance to meet NCAP + Automated Driving requirements. The AWR2944-ECO/AWR2E44-ECO and AWR2944LC/AWR2E44LC are mainstream and feature optimized variants respectively in the family to enable customers with a scalable portfolio between P, ECO, and LC devices in the family. The AWR2944P/AWR2E44P/AWR2944-ECO/AWR2E44-ECO/AWR2944LC/AWR2E44LC is also a single-chip mmWave sensor composed of a FMCW transceiver, capable of operation in the 76- to 81-GHz band, radar data processing elements, and peripherals for in-vehicle networking. The radar sensor is built with TI’s low-power 45-nm RFCMOS process with designs to enhance RF and compute performance enabling unprecedented levels of integration in a small form factor and minimal BOM. The AWR2944P/AWR2E44P/AWR2944-ECO/AWR2E44-ECO/AWR2944LC/AWR2E44LC device is designed for low-power, self-monitored, ultra-accurate radar systems in the automotive space.

The AWR2E44P/AWR2E44-ECO/AWR2E44LC variant provides customers with an remarkable Launch on Package (LOP) antenna feature which facilitates the attachment of antennas directly on to the package. LOP technology enables loss-less transmission of signals from the AWR2E44P/AWR2E44-ECO/AWR2E44LC chip to the antenna via holes in the PCB & launches on the bottom of the chip. The chip and antenna are directly soldered to the PCB enabling low cost PCB material to be used instead of expensive high-frequency material.

TI’s low-power 45nm RFCMOS process enables a monolithic implementation of a 4 TX, 4 RX system with integrated PLL, VCO, mixer, and baseband ADC. Integrated in the DSP subsystem (DSS), is TI’s high-performance C66x DSP for radar signal processing. The device includes a Radio Processor Subsystem (RSS), which is responsible for radar front-end configuration, control, and calibration. Within the Main Subsystem (MSS), the device implements a user-programmable Arm Cortex-R5F processor allowing for custom control and automotive interface applications. The hardware accelerator block (HWA 2.1) supplements the DSS and MSS by offloading common radar processing such as FFT, constant false alarm rate (CFAR), scaling, and compression. This saves MIPS on the DSS and MSS, opening up resources for custom applications and higher-level algorithms.

A Hardware Security Module (HSM) is also provisioned in the device (available for only secure part variants). The HSM consists of a programmable Arm Cortex-M4 core and the necessary infrastructure to provide a secure zone of operation within the device.

The AWR2944P/AWR2E44P/AWR2944-ECO/AWR2E44-ECO/AWR2944LC/AWR2E44LC also incorporates a Cortex-M4 processor to configure and control the Hardware Accelerator module (HWA 2.1).

Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor.

Additionally, the AWR2944P/AWR2E44P/AWR2944-ECO/AWR2E44-ECO/AWR2944LC/AWR2E44LC is provided as a complete platform device including TI hardware and software reference designs, software drivers, sample configurations, API guides, and user documentation.

The AWR2944P/AWR2E44P is a "Performance" expansion to the AWR2944 portfolio with enhanced RF and compute performance to meet NCAP + Automated Driving requirements. The AWR2944-ECO/AWR2E44-ECO and AWR2944LC/AWR2E44LC are mainstream and feature optimized variants respectively in the family to enable customers with a scalable portfolio between P, ECO, and LC devices in the family. The AWR2944P/AWR2E44P/AWR2944-ECO/AWR2E44-ECO/AWR2944LC/AWR2E44LC is also a single-chip mmWave sensor composed of a FMCW transceiver, capable of operation in the 76- to 81-GHz band, radar data processing elements, and peripherals for in-vehicle networking. The radar sensor is built with TI’s low-power 45-nm RFCMOS process with designs to enhance RF and compute performance enabling unprecedented levels of integration in a small form factor and minimal BOM. The AWR2944P/AWR2E44P/AWR2944-ECO/AWR2E44-ECO/AWR2944LC/AWR2E44LC device is designed for low-power, self-monitored, ultra-accurate radar systems in the automotive space.

The AWR2E44P/AWR2E44-ECO/AWR2E44LC variant provides customers with an remarkable Launch on Package (LOP) antenna feature which facilitates the attachment of antennas directly on to the package. LOP technology enables loss-less transmission of signals from the AWR2E44P/AWR2E44-ECO/AWR2E44LC chip to the antenna via holes in the PCB & launches on the bottom of the chip. The chip and antenna are directly soldered to the PCB enabling low cost PCB material to be used instead of expensive high-frequency material.

TI’s low-power 45nm RFCMOS process enables a monolithic implementation of a 4 TX, 4 RX system with integrated PLL, VCO, mixer, and baseband ADC. Integrated in the DSP subsystem (DSS), is TI’s high-performance C66x DSP for radar signal processing. The device includes a Radio Processor Subsystem (RSS), which is responsible for radar front-end configuration, control, and calibration. Within the Main Subsystem (MSS), the device implements a user-programmable Arm Cortex-R5F processor allowing for custom control and automotive interface applications. The hardware accelerator block (HWA 2.1) supplements the DSS and MSS by offloading common radar processing such as FFT, constant false alarm rate (CFAR), scaling, and compression. This saves MIPS on the DSS and MSS, opening up resources for custom applications and higher-level algorithms.

A Hardware Security Module (HSM) is also provisioned in the device (available for only secure part variants). The HSM consists of a programmable Arm Cortex-M4 core and the necessary infrastructure to provide a secure zone of operation within the device.

The AWR2944P/AWR2E44P/AWR2944-ECO/AWR2E44-ECO/AWR2944LC/AWR2E44LC also incorporates a Cortex-M4 processor to configure and control the Hardware Accelerator module (HWA 2.1).

Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor.

Additionally, the AWR2944P/AWR2E44P/AWR2944-ECO/AWR2E44-ECO/AWR2944LC/AWR2E44LC is provided as a complete platform device including TI hardware and software reference designs, software drivers, sample configurations, API guides, and user documentation.
filter Andere mmWave-Radarsensoren für die Automobilindustrie suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 8
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt AWR2944P/AWR2E44P/AWR2944-ECO/AWR2E44-ECO/AWR2944LC/AWR2E44LC Single-Chip 76 to 81GHz FMCW Automotive Radar Sensor datasheet (Rev. B) PDF | HTML 02.02.2026
* Benutzerhandbuch AWR2944P Technical Reference Manual (Rev. B) 06.02.2026
* Errata AWR2x44P Device Errata (Rev. A) PDF | HTML 24.06.2025
Anwendungshinweis AWR294x Safety Diagnostic Library (SDL) User Reference PDF | HTML 29.07.2026
Anwendungshinweis Getting Started with mmWave Sensors PDF | HTML 12.03.2025
Anwendungshinweis Flash Variants Supported by the mmWave Sensor (Rev. G) PDF | HTML 17.12.2024
Anwendungshinweis AWR294x, AWR2544 Primary and Secondary Bootloader (Rev. B) PDF | HTML 13.12.2024
Whitepaper Enhanced Detections and Compute for ADAS systems with Next Gen Radar Sensors PDF | HTML 05.12.2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AWR2944PEVM — AWR2944PEVM-Evaluierungsmodul für den Radarsensor AWR2944P

Das AWR2944PEVM ist eine Evaluierungsplatine für den mmWave-Sensorbaustein AWR2944P mit direkter Verbindung zum DCA1000 EVM. Dieses EVM-Kit enthält alles, was Sie zum Einstieg in die Entwicklung von Software für den On-Chip-Controller C66x DSP, ARM® Cortex®-R5F und den Hardwarebeschleuniger (HWA (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

AWR2E44PEVM — AWR2E44P – Evaluierungsmodul

Das AWR2E44PEVM ist eine einfach zu handhabende Evaluierungsplatine für den mmWave-Sensorbaustein AWR2E44P mit direkter Verbindung zum DCA1000EVM. Dieses EVM-Kit enthält alles, was Sie für die Entwicklung von Software für den On-Chip-ARM® Cortex-R5F®-Controller und den Hardwarebeschleuniger (HWA (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Debug-Tastkopf

TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger

TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)

Von: TASKING Germany GmbH
Unterstützte Produkte und Hardware
Third-party accessory

GAPW-3P-ANTENNA — Antennendesign für ADAS-Radarsensoren von GapWaves

Gapwaves offers high-performance, low-loss, and cost-efficient waveguide antennas for short-, mid- and long-range automotive radars and industrial applications. Our antennas feature a flexible design and a compact form factor, robust contact-free PCB integration and support contact-free LoP (...)

Von: Gapwaves
Unterstützte Produkte und Hardware
Software-Entwicklungskit (SDK)

MMWAVE-MCUPLUS-SDK — mmWave SDK for AWR2944 and AM2732

Das mmWave-Mikrocontroller (MCU) plus Software Development Kit (MMWAVE-MCUPLUS-SDK) ist eine Sammlung von Softwarepaketen, die die Anwendungsevaluierung und -Entwicklung auf mmWave-Sensoren von TI ermöglichen. Dieses Tool enthält das MMWAVE-MCUPLUS-SDK und Begleitpakete, um Ihre Designanforderungen (...)

Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

MMWAVE-STUDIO-2G — mmWave studio GUI tools for 2nd-generation parts (xWR2243)

MMWAVE-STUDIO ist eine eigenständige Windows®-GUI mit der Möglichkeit, mmWave-Sensormodule zu konfigurieren und zu steuern und Analog-zu-Digital (ADC)-Daten für die Offline-Analyse zu erfassen. Die ADC-Datenerfassung soll die Evaluierung und Charakterisierung der HF-Leistung sowie die (...)

Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

TSK-3P-VX-TOOLSET — TASKING-VX-Toolset für Arm

Das VX-Toolset für Arm ist eine zertifizierte Compiler-Toolchain für die Entwicklung sicherheitskritischer Embedded-Software auf ausgewählten Cortex-M- und Cortex-R-Kernbausteinen. Mit der Eclipse-IDE-Integration, erweiterter Multicore-Unterstützung und Kompatibilität mit TASKING-BlueBox-Debuggern (...)

Von: TASKING Germany GmbH
Unterstützte Produkte und Hardware
Onlineschulungen

RADAR-ACADEMY — mmWave Radar Academy

The Radar Academy is a documentation package intended to provide educational resources related to mmWave radar technology
Unterstützte Produkte und Hardware
Erste Schritte

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Unterstützte Produkte und Hardware
Firmware

USIT-3P-SECIC-HSM — Uni-Sentry SecIC-HSM Firmware

Das SecIC-HSM wurde entwickelt, um die für MCU-/SoC-Chips erforderlichen Cybersicherheitsanforderungen zu erfüllen. Die HSM-Firmware kann in Bereichen wie Automobil, alternative Energieerzeugung, Photovoltaik, Robotik, Gesundheitswesen und Luftfahrt eingesetzt werden. Zu den bereitgestellten (...)

Von: Shanghai Uni-Sentry Intelligent Technology Co., LTD
Unterstützte Produkte und Hardware
Firmware

USIT-3P-SECIC-PQC — Uni-Sentry SecIC-PQC-Algorithmus-Firmware

Die Sicherheitslösungen von Uni-Sentry verwenden PQC-Algorithmen, die Entschlüsselungsbedrohungen durch Quantencomputer gegenüber herkömmlichen kryptografischen Algorithmen abwehren können. Die PQC-Firmware ist gemeinsam mit dem Hardware-Sicherheitsmodul (HSM) optimiert, sodass (...)

Von: Shanghai Uni-Sentry Intelligent Technology Co., LTD
Unterstützte Produkte und Hardware
Software-Programmiertool

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash ist Teil des umfassenden CCStudio™-Entwicklungsökosystem von TI und ein Softwaretool zur Programmierung des integrierten Flash-Speichers von TI-Mikrocontrollern und drahtlosen Kommunikationsbausteinen sowie des integrierten Flash-Speichers für TI-Prozessoren. UniFlash bietet sowohl (...)

Unterstützte Produkte und Hardware
Support-Software

RADAR-TOOLBOX — Radar evaluation and development support package with example projects, documentation and tools

The Radar Toolbox is a collection of demos, software tools, and documentation designed to assist in the evaluation of TI Radar Devices
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
FCCSP (ALT) 266 Ultra Librarian
FCCSP (AMX) 278 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos