IWR2243

AKTIV

76-GHz- bis 81-GHz-Hochleistungs-MMIC für die Industrie

Jetzt bestellen

Datenblatt

document-pdfAcrobat IWR2243 Single-Chip 76- to 81-GHz FMCW Transceiver datasheet (Englisch) PDF | HTML

Fehlerverzeichnis

document-pdfAcrobat
IWR2243 Single-Chip 76- to 81-GHz FMCW Transceiver Silicon Errata (Englisch)

IWR2243

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Type

Frequency range

76 - 81 GHz

Number of receivers

Number of transmitters

ADC sampling rate (ksps)

45000

TX power (dBm)

Edge AI enabled

Interface type

CSI-2, I2C, SPI

Operating temperature range (°C)

-40 to 105

TI functional safety category

Functional Safety-Compliant

Power supply solution

LP87745-Q1

Rating

Catalog

Type

Frequency range

76 - 81 GHz

Number of receivers

Number of transmitters

ADC sampling rate (ksps)

45000

TX power (dBm)

Edge AI enabled

Interface type

CSI-2, I2C, SPI

Operating temperature range (°C)

-40 to 105

TI functional safety category

Functional Safety-Compliant

Power supply solution

LP87745-Q1

Rating

Catalog

FCCSP (ABL)

161

108.16 mm² 10.4 x 10.4

FMCW transceiver
- Integrated PLL, transmitter, receiver, baseband, and ADC
- 76- to 81-GHz coverage with 5 GHz available bandwidth
- Four receive channels
- Three transmit channels
- Ultra-accurate chirp engine based on Fractional-N PLL
- TX power: 13 dBm
- RX noise figure: 13 dB
- Phase noise at 1 MHz:
  - –96 dBc/Hz (76 to 77 GHz)
  - –94 dBc/Hz (77 to 81 GHz)
Built-in calibration and self-test
- Built-in firmware (ROM)
- Self-calibrating system across frequency and temperature
Host interface
- Control interface with external processor over SPI or I2C interface
- Data interface with external processor over MIPI D-PHY and CSI2 v1.1
- Interrupts for Fault Reporting
Functional Safety-Compliant
- Developed for functional safety applications
- Documentation available to aid IEC 61508 functional safety system design up to SIL 3
- Hardware integrity up to SIL-2
- Safety-related certification
  - IEC 61508 certified upto SIL 2 by TUV SUD
IWR2243 advanced features
- Embedded self-monitoring with limited Host processor involvement
- Complex baseband architecture
- Option of cascading multiple devices to increase channel count
- Embedded interference detection capability
Power management
- Built-in LDO Network for enhanced PSRR
- I/Os support dual voltage 3.3 V/1.8 V
Clock source
- Supports externally driven clock (square/sine) at 40 MHz
- Supports 40 MHz crystal connection with load capacitors
Easy hardware design
- 0.65-mm pitch, 161-pin 10.4 mm × 10.4 mm flip chip BGA package for easy assembly and low-cost PCB design
- Small solution size
Junction temperature range of –40°C to 105°C

FMCW transceiver
- Integrated PLL, transmitter, receiver, baseband, and ADC
- 76- to 81-GHz coverage with 5 GHz available bandwidth
- Four receive channels
- Three transmit channels
- Ultra-accurate chirp engine based on Fractional-N PLL
- TX power: 13 dBm
- RX noise figure: 13 dB
- Phase noise at 1 MHz:
  - –96 dBc/Hz (76 to 77 GHz)
  - –94 dBc/Hz (77 to 81 GHz)
Built-in calibration and self-test
- Built-in firmware (ROM)
- Self-calibrating system across frequency and temperature
Host interface
- Control interface with external processor over SPI or I2C interface
- Data interface with external processor over MIPI D-PHY and CSI2 v1.1
- Interrupts for Fault Reporting
Functional Safety-Compliant
- Developed for functional safety applications
- Documentation available to aid IEC 61508 functional safety system design up to SIL 3
- Hardware integrity up to SIL-2
- Safety-related certification
  - IEC 61508 certified upto SIL 2 by TUV SUD
IWR2243 advanced features
- Embedded self-monitoring with limited Host processor involvement
- Complex baseband architecture
- Option of cascading multiple devices to increase channel count
- Embedded interference detection capability
Power management
- Built-in LDO Network for enhanced PSRR
- I/Os support dual voltage 3.3 V/1.8 V
Clock source
- Supports externally driven clock (square/sine) at 40 MHz
- Supports 40 MHz crystal connection with load capacitors
Easy hardware design
- 0.65-mm pitch, 161-pin 10.4 mm × 10.4 mm flip chip BGA package for easy assembly and low-cost PCB design
- Small solution size
Junction temperature range of –40°C to 105°C

The IWR2243 is an integrated single-chip FMCW transceiver capable of operation in the 76- to 81-GHz band. This device enables unprecedented levels of integration in an extremely small form factor. IWR2243 is an ideal solution for low power, self-monitored, ultra-accurate radar systems in the industrial space.

IWR2243 is a self-contained FMCW transceiver single-chip solution that simplifies the implementation of Radar sensors. It is built on TI’s low-power 45-nm RFCMOS process, which enables a monolithic implementation of a 3TX, 4RX system with built-in PLL and ADC converters. Simple programming model changes can enable a wide variety of sensor implementation with the possibility of dynamic reconfiguration for implementing a multimode sensor. The IWR2243 device supports connection of multiple devices in cascade fashion. This enhances the angular resolution to meet high performance radar sensor development.

Additionally, the device is provided as a complete platform solution including reference hardware design, software drivers, sample configurations, API guide, and user documentation.

filter

Andere mmWave-Radarsensoren für Industrieanwendungen suchen

Herunterladen Video mit Transkript ansehen Video

Weitere Informationen

Besuchen Sie die TI Developer Zone und beginnen Sie mit der Evaluierung und Entwicklung.

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 5

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Data sheet	IWR2243 Single-Chip 76- to 81-GHz FMCW Transceiver datasheet	PDF \| HTML	14 Jul 2021
*	Errata	IWR2243 Single-Chip 76- to 81-GHz FMCW Transceiver Silicon Errata	PDF \| HTML	12 Jul 2021
	Functional safety information	IWRxx43 TUV SUD Functional Safety Certificate (Rev. B)		23 Jan 2024
	Functional safety information	Certificate No. Z10 088989 0022 Rev. 00 (Rev. A)		02 Jun 2022
	Application note	mmWave Radar Radome Design Guide	PDF \| HTML	17 Aug 2021

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AWR2243BOOST — AWR2243 Hochleistungs-MMIC (76 GHz bis 81 GHz) der zweiten Generation, für die Automobilindustrie

Das AWR2243 BoosterPack™-Plug-in-Modul ist eine anwenderfreundliche Evaluierungsplatine für den AWR2243-mmWave-Sensorbaustein mit einem Chip.

AWR2243BOOST enthält alles, was Sie zum Einstieg in die Entwicklung mit der MMWAVE-STUDIO-Umgebung und dem Echtzeit-Datenerfassungsadapter DCA1000 benötigen.

(...)

Benutzerhandbuch: PDF | HTML

Nicht verfügbar auf TI.com

Hardware-Programmiertool

HS-3P-77-3D-WGA-LOP-4X4 — Antennendesign für ADAS-Radarsensoren von HUBER+SUHNER

77 GHz 3D-Wellenleiterantenne 4Tx4R – Produktfamilie für Substrat-unabhängige HF-Lösungen

HUBER+SUHNER hat eine metallisierte 3D-Kunststoff-Wellenleiterantenne der zweiten Generation entwickelt und produziert, die für Substrat-unabhängige HF-Lösungen entwickelt wurde. Diese innovative Technologie, (...)

Von: Huber+Suhner AG

Partner-Website besuchen

Third-party accessory

GAPW-3P-ANTENNA — Antennendesign für ADAS-Radarsensoren von GapWaves

Gapwaves offers high-performance, low-loss, and cost-efficient waveguide antennas for short-, mid- and long-range automotive radars and industrial applications. Our antennas feature a flexible design and a compact form factor, robust contact-free PCB integration and support contact-free LoP (...)

Von: Gapwaves

Partner-Website besuchen

GUI für Evaluierungsmodul (EVM)