NEW

MSPM0G3107

Name: MSPM0G3107
Brand: TI
SKU: MSPM0G3107
Price: 0.855 USD

预发布

具有 128KB 闪存、32KB SRAM、ADC 和 CAN-FD 的 80MHz Arm® Cortex®-M0+ MCU

立即订购

数据表

document-pdfAcrobat MSPM0G310x Mixed-Signal Microcontrollers with CAN-FD Interface 数据表 (英文) PDF | HTML

MSPM0G3107

预发布

数据表

立即订购

产品详情

CPU

Arm Cortex-M0+

Frequency (MHz)

80

Flash memory (kByte)

128

RAM (kByte)

32

ADC type

12-bit SAR

Number of GPIOs

28

UART

4

Number of I2Cs

2

Features

5-V-tolerant I/Os, DMA, Zero-drift OpAmp,CAN

Operating temperature range (°C)

-40 to 105

Rating

Catalog

SPI

2

CPU

Arm Cortex-M0+

Frequency (MHz)

80

Flash memory (kByte)

128

RAM (kByte)

32

ADC type

12-bit SAR

Number of GPIOs

28

UART

4

Number of I2Cs

2

Features

5-V-tolerant I/Os, DMA, Zero-drift OpAmp,CAN

Operating temperature range (°C)

-40 to 105

Rating

Catalog

SPI

2

VQFN (RHB)

32

25 mm² 5 x 5

Core
- Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 80 MHz
Operating characteristics
- Extended temperature: –40°C up to 125°C
- Wide supply voltage range: 1.62 V to 3.6 V
Memories
- Up to 128KB of flash memory with built-in error correction code (ECC)
- Up to 32KB of ECC protected SRAM with hardware parity
High-performance analog peripherals
- Two simultaneous sampling 12-bit 4-Msps analog-to-digital converters (ADC’s) with up to external channels
  - 14-bit effective resolution at 250-ksps with hardware averaging
- One general-purpose amplifier (GPAMP)
- Configurable 1.4-V or 2.5-V internal shared voltage reference (VREF)
- Integrated temperature sensor
Optimized low-power modes
- RUN: 96 µA/MHz (CoreMark)
- SLEEP: 200 µA at 4 MHz
- STOP: 50 µA at 32 kHz
- STANDBY: 1.5 µA with RTC and SRAM retention
- SHUTDOWN: 100 nA with IO wakeup capability
Intelligent digital peripherals
- 7-channel DMA controller
- Two 16-bit advanced control timers supporting dead band insertion and fault handling
- Seven timers supporting up to 22 PWM channels
  - One 16-bit general purpose timer
  - One 16-bit general purpose timer supports QEI
  - Two 16-bit general-purpose timers support low-power operation in STANDBY mode
  - One 32-bit general-purpose timer
  - Two 16-bit advanced timers with deadband
- Two window-watchdog timers
- RTC with alarm and calendar mode
Enhanced communication interfaces
- Four UART interfaces; one supports LIN, IrDA, DALI, Smart Card, Manchester, and three support low-power operation in STANDBY mode
- Two I²C interfaces supporting up to FM+ (1 Mbit/s), SMBus/PMBus, and wakeup from STOP mode
- Two SPI interfaces, with one SPI interface supporting upto 32Mbits/s
- One Controller Area Network (CAN) interface supports CAN 2.0 A or B and CAN-FD
Clock system
- Internal 4- to 32-MHz oscillator with upto ±1% accuracy (SYSOSC)
- Phase-locked loop (PLL) up to 80 MHz
- Internal 32-kHz oscillator (LFOSC)
- External 4- to 48-MHz crystal oscillator (HFXT)
- External 32-kHz crystal oscillator(LFXT)
- External clock input
Data integrity and encryption
- Cyclic redundancy checker (CRC-16, CRC-32)
Flexible I/O features
- Up to GPIOs
  - Two 5-V tolerant IOs
  - Two high-drive IOs with 20-mA drive strength
Development support
- 2-pin serial wire debug (SWD)
Package options
- 32-pin VQFN
- 28-pin VSSOP
- 20-pin VSSOP
Family members
- MSPM0G3105: 32KB flash, 16KB RAM
- MSPM0G3106: 64KB flash, 32KB RAM
- MSPM0G3107: 128KB flash, 32KB RAM
Development kits and software (also see Tools and Software)
- LP-MSPM0G3507 LaunchPad™ development kit
- MSP Software Development Kit (SDK)

Core
- Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 80 MHz
Operating characteristics
- Extended temperature: –40°C up to 125°C
- Wide supply voltage range: 1.62 V to 3.6 V
Memories
- Up to 128KB of flash memory with built-in error correction code (ECC)
- Up to 32KB of ECC protected SRAM with hardware parity
High-performance analog peripherals
- Two simultaneous sampling 12-bit 4-Msps analog-to-digital converters (ADC’s) with up to external channels
  - 14-bit effective resolution at 250-ksps with hardware averaging
- One general-purpose amplifier (GPAMP)
- Configurable 1.4-V or 2.5-V internal shared voltage reference (VREF)
- Integrated temperature sensor
Optimized low-power modes
- RUN: 96 µA/MHz (CoreMark)
- SLEEP: 200 µA at 4 MHz
- STOP: 50 µA at 32 kHz
- STANDBY: 1.5 µA with RTC and SRAM retention
- SHUTDOWN: 100 nA with IO wakeup capability
Intelligent digital peripherals
- 7-channel DMA controller
- Two 16-bit advanced control timers supporting dead band insertion and fault handling
- Seven timers supporting up to 22 PWM channels
  - One 16-bit general purpose timer
  - One 16-bit general purpose timer supports QEI
  - Two 16-bit general-purpose timers support low-power operation in STANDBY mode
  - One 32-bit general-purpose timer
  - Two 16-bit advanced timers with deadband
- Two window-watchdog timers
- RTC with alarm and calendar mode
Enhanced communication interfaces
- Four UART interfaces; one supports LIN, IrDA, DALI, Smart Card, Manchester, and three support low-power operation in STANDBY mode
- Two I²C interfaces supporting up to FM+ (1 Mbit/s), SMBus/PMBus, and wakeup from STOP mode
- Two SPI interfaces, with one SPI interface supporting upto 32Mbits/s
- One Controller Area Network (CAN) interface supports CAN 2.0 A or B and CAN-FD
Clock system
- Internal 4- to 32-MHz oscillator with upto ±1% accuracy (SYSOSC)
- Phase-locked loop (PLL) up to 80 MHz
- Internal 32-kHz oscillator (LFOSC)
- External 4- to 48-MHz crystal oscillator (HFXT)
- External 32-kHz crystal oscillator(LFXT)
- External clock input
Data integrity and encryption
- Cyclic redundancy checker (CRC-16, CRC-32)
Flexible I/O features
- Up to GPIOs
  - Two 5-V tolerant IOs
  - Two high-drive IOs with 20-mA drive strength
Development support
- 2-pin serial wire debug (SWD)
Package options
- 32-pin VQFN
- 28-pin VSSOP
- 20-pin VSSOP
Family members
- MSPM0G3105: 32KB flash, 16KB RAM
- MSPM0G3106: 64KB flash, 32KB RAM
- MSPM0G3107: 128KB flash, 32KB RAM
Development kits and software (also see Tools and Software)
- LP-MSPM0G3507 LaunchPad™ development kit
- MSP Software Development Kit (SDK)

MSPM0G310x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform operating at up to 80-MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62 V to 3.6 V.

The MSPM0G310x devices provide up to 128KB embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM with ECC and hardware parity option. They also incorporate a memory protection unit, 7-channel DMA, and a variety of high-performance analog peripherals such as as two 12-bit 4-Msps ADCs, configurable internal shared voltage reference, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two 16-bit advanced control timers, five general purpose timers (with one 16-bit general-purpose timer for QEI interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two windowed-watchdog timers, and one RTC with alarm and calendar mode. These devices provide data integrity and encryption peripherals (CRC) and enhanced communication interfaces (four UART, two I2C, two SPI , CAN 2.0/FD).

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers find the MCU that meets their project’s needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.

MSPM0G310x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 G-Series 80-MHz Microcontrollers Technical Reference Manual .

MSPM0G310x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform operating at up to 80-MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62 V to 3.6 V.

The MSPM0G310x devices provide up to 128KB embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM with ECC and hardware parity option. They also incorporate a memory protection unit, 7-channel DMA, and a variety of high-performance analog peripherals such as as two 12-bit 4-Msps ADCs, configurable internal shared voltage reference, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two 16-bit advanced control timers, five general purpose timers (with one 16-bit general-purpose timer for QEI interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two windowed-watchdog timers, and one RTC with alarm and calendar mode. These devices provide data integrity and encryption peripherals (CRC) and enhanced communication interfaces (four UART, two I2C, two SPI , CAN 2.0/FD).

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers find the MCU that meets their project’s needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.

MSPM0G310x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 G-Series 80-MHz Microcontrollers Technical Reference Manual .

open-in-new

查找其他 Arm Cortex-M0+ MCU

下载观看带字幕的视频视频

申请更多信息

可提供完整的数据表、用户指南、软件开发套件和其他信息。立即申请

技术文档

star

=有关此产品的 TI 精选热门文档

未找到结果。请清除搜索，并重试。

查看全部 34

	类型	项目标题		下载最新的英语版本		日期
*	数据表	MSPM0G310x Mixed-Signal Microcontrollers with CAN-FD Interface 数据表	PDF \| HTML			2023年 1月 13日
	应用手册	EEPROM 仿真 A 型设计	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 4月 19日
	应用手册	Migration Guide From STM32 to Arm-Based MSPM0.. (Rev. A)	PDF \| HTML			2023年 4月 12日
	应用手册	Migration Guide From STM32 to Arm-Based MSPM0.... (Rev. A)	PDF \| HTML			2023年 4月 12日
	应用手册	从 STM32 到基于 Arm 的 MSPM0 的迁移指南 (Rev. A)	PDF \| HTML	下载英文版本 (Rev.A)	PDF \| HTML	2023年 4月 12日
	应用手册	MSPM0 G-Series MCUs Hardware Development Guide.. (Rev. A)	PDF \| HTML			2023年 4月 11日
	应用手册	MSPM0 MCU 快速参考指南 (Rev. A)	PDF \| HTML	下载英文版本 (Rev.A)	PDF \| HTML	2023年 4月 11日
	应用手册	MSPM0 MCUs Quick Reference Guide.. (Rev. A)	PDF \| HTML			2023年 4月 11日
	应用手册	MSPM0 MCUs Quick Reference Guide.... (Rev. A)	PDF \| HTML			2023年 4月 11日
	应用手册	MSPM0 G 系列 MCU 硬件开发指南 (Rev. A)	PDF \| HTML	下载英文版本 (Rev.A)	PDF \| HTML	2023年 4月 10日
	应用手册	MSPM0 G-Series MCUs Hardware Development Guide.... (Rev. A)	PDF \| HTML			2023年 4月 10日
	应用手册	从 MSP430™ MCU 到 MSPM0 MCU 的迁移指南 (Rev. A)	PDF \| HTML	下载英文版本 (Rev.A)	PDF \| HTML	2023年 3月 29日
	技术文章	How Arm Cortex-M0+ MCUs optimize general-purpose processing, sensing and control				2023年 3月 8日
	应用手册	使用 MSPM0 MCU 优化现场传感器和发送器应用	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 3日
	应用手册	使用 MSPM0 MCU 设计单轴和三轴自拍杆	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 3日
	应用手册	使用 MSPM0 MCU 设计基于梯形的 BLDC 电机控制器	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 3日
	应用手册	使用低成本 MSPM0 MCU 在无线电动工具和园艺工具中实现可扩展性	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 3日
	应用手册	使用低成本 MSPM0 MCU 提高电池管理设计的灵活性	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 3日
	应用手册	使用高度集成的低成本 MSPM0 MCU 简化脉搏血氧仪设计	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 3日
	应用手册	基于 MSPM0 MCU 实现使用无传感器 FOC 算法的 BLDC/ PMSM 控制	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 3日
	应用手册	5V 接口	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 2日
	应用手册	具有 PWM 功能的 LED 驱动器	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 2日
	应用手册	动态可编程增益放大器	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 2日
	应用手册	用于 ADC 的 DMA 乒乓	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 3月 2日
	应用手册	热敏电阻温度检测	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 2月 28日
	应用手册	跨阻放大器	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 2月 28日
	应用手册	MSPM0 G 系列 MCU 功耗优化指南	PDF \| HTML			2023年 2月 22日
	白皮书	MSPM0：通过易于使用的工具、软件和 Academy 将创意变为产品	PDF \| HTML			2023年 2月 22日
	应用手册	MSPM0 MCU 中的网络安全机制	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 1月 24日
	更多文献资料	MSPM0 MCUs: More Options, Unlimited Possibilities..	PDF \| HTML			2023年 1月 24日
	更多文献资料	MSPM0 MCUs: More Options, Unlimited Possibilities....	PDF \| HTML			2023年 1月 24日
	更多文献资料	MSPM0 MCU：更多选择，潜力无穷	PDF \| HTML	下载英文版本	PDF \| HTML	2023年 1月 24日
	应用手册	M0L 或 M0G：如何为您的应用选择合适的 MSP 微控制器	PDF \| HTML	下载英文版本	PDF \| HTML	2022年 12月 13日
	应用手册	MSPM0 引导加载程序 (BSL) 主机实现	PDF \| HTML			2022年 12月 5日

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

评估板

LP-MSPM0G3507 — 适用于 80MHz Arm® Cortex®-M0+ MCU 的 MSPM0G3507 LaunchPad™ 开发套件

LP-MSPM0G3507 LaunchPad™ 开发套件是基于 MSPM0G3507 的易用型评估模块 (EVM)，包含在 MSPM0G3507 M0+ MCU 平台上开始开发所需要的全部资源，包括用于编程、调试和能量测量的板载调试探针。该板包含三个按钮、两个 LED（其中一个是 RGB LED）以及模拟温度传感器和光传感器，还具有一个外部缓冲器，用于显示 4MSPS 时的高速 ADC 性能。

用户指南: PDF | HTML

下载英文版本 (Rev.A): PDF | HTML

发送申请

调试探针

TMDSEMU110-U — XDS110 JTAG 调试探针

德州仪器 (TI) 的 XDS110 是一款适用于 TI 嵌入式处理器的新型调试探针（仿真器）。XDS110 取代了 XDS100 系列，同时在单个仓体中支持更广泛的标准（IEEE1149.1、IEEE1149.7、SWD）。此外，所有 XDS 调试探针在所有具有嵌入式跟踪缓冲器 (ETB) 的 Arm® 和 DSP 处理器中均支持内核和系统跟踪。对于引脚上的内核跟踪，则需要使用 XDS560v2 PRO TRACE。

德州仪器 (TI) 的 XDS110 通过 TI 20 引脚连接器（带有适用于 TI 14 引脚、Arm 10 引脚和 Arm 20 引脚的多个适配器）连接到目标板，并通过 (...)

用户指南: PDF

TI.com 上无现货

评估模块 (EVM) 用 GUI

MSPM0-ANALOG-CONFIGURATOR — Analog Configurator for MSPM0

The MSPM0 analog configurator is a graphical configuration tool designed to simplify and accelerate the design and enablement of an analog signal chain using a MSPM0 device with no traditional coding development necessary.

The tool uses an intuitive GUI to configure a signal chain using the high (...)

支持的产品和硬件

产品

Arm Cortex-M0+ MCU

MSPM0G1106 — 具有 64KB 闪存、32KB SRAM、ADC 的 80MHz Arm Cortex-M0+ MCU

MSPM0G1107 — 具有 128KB 闪存、32KB SRAM 和 ADC 的 80MHz Arm Cortex-M0+ MCU

MSPM0G1505 — 具有 32KB 闪存、16KB SRAM、ADC、比较器、DAC、运算放大器的 80MHz Arm Cortex-M0+ MCU

MSPM0G1506 — 具有 64KB 闪存、32KB SRAM、ADC、比较器、DAC、运算放大器的 80MHz Arm Cortex-M0+ MCU

MSPM0G1507 — 具有 128KB 闪存、32KB SRAM、ADC、比较器、DAC、运算放大器的 80MHz Arm Cortex-M0+ MCU

MSPM0G3105 — 具有 32KB 闪存、16KB SRAM、ADC、CAN-FD 的 80MHz Arm Cortex-M0+ MCU

MSPM0G3106 — 具有 64KB 闪存、32KB SRAM、ADC、CAN-FD 的 80MHz Arm Cortex-M0+ MCU

MSPM0G3107 — 具有 128KB 闪存、32KB SRAM、ADC 和 CAN-FD 的 80MHz Arm Cortex-M0+ MCU

MSPM0G3505 — 具有 32KB 闪存、16KB SRAM、ADC、比较器、DAC、运算放大器、CAN-FD 的 80MHz Arm Cortex-M0+ MCU

MSPM0G3506 — 具有 64KB 闪存、32KB SRAM、ADC、比较器、DAC、运算放大器、CAN-FD 的 80MHz Arm Cortex-M0+ MCU

MSPM0G3507 — 具有 128KB 闪存、32KB SRAM、ADC、比较器、DAC、运算放大器、CAN-FD 的 80MHz Arm Cortex-M0+ MCU

MSPM0L1105 — 具有 32KB 闪存、4KB SRAM、12 位 ADC 的 32MHz Arm® Cortex®-M0+ MCU

MSPM0L1106 — 具有 64KB 闪存、4KB SRAM、12 位 ADC 的 32MHz Arm® Cortex®-M0+ MCU

MSPM0L1303 — 具有 8KB 闪存、2KB SRAM、12 位 ADC、比较器和 OPA 的 32MHz Arm® Cortex®-M0+ MCU

MSPM0L1304 — 具有 16KB 闪存、2KB SRAM、12 位 ADC、比较器和 OPA 的 32MHz Arm® Cortex®-M0+ MCU

MSPM0L1305 — 具有 32KB 闪存、4KB SRAM、12 位 ADC、比较器和 OPA 的 32MHz Arm® Cortex®-M0+ MCU

MSPM0L1306 — 具有 64KB 闪存、4KB SRAM、12 位 ADC、比较器和 OPA 的 32MHz Arm® Cortex®-M0+ MCU

硬件开发

LP-MSPM0L1306 —

适用于 32MHz Arm® Cortex®-M0+ MCU 的 MSPM0L1306 LaunchPad™ 开发套件

Unknown

LP-MSPM0G3507 — 适用于 80MHz Arm® Cortex®-M0+ MCU 的 MSPM0G3507 LaunchPad™ 开发套件

LP-MSPM0L1306 — 适用于 32MHz Arm® Cortex®-M0+ MCU 的 MSPM0L1306 LaunchPad™ 开发套件

浏览

下载选项

IDE、配置、编译器或调试器

CCSTUDIO-THEIA — Code Composer Studio™ integrated development environment (IDE) Theia

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications. Code Composer Studio is available for download across Windows®, Linux® and macOS® (...)