LMX2571EPEVM
1.34GHz, 저전력, 극한의 온도 RF 신시사이저용 LMX2571-EP 평가 모듈
LMX2571EPEVM
개요
LMX2571-EP 평가 모듈(EVM)은 LMX2571-EP를 개발하기 위한 플랫폼으로, 10MHz와 1,344MHz 사이의 주파수를 생성할 수 있고 -55°C~125°C 사이의 확장된 온도에서 작동할 수 있는 저전력 고성능 RF 신시사이저입니다.
특징
- 외부 전압 제어 오실레이터(VCO) 옵션
- 출력 채널 디바이더는 10MHz~1400MHz 작동을 지원합니다
- FSK(직접 디지털 주파수 편이 방식) 변조
- –55°C~125°C 사이의 확장된 온도
시작하기
- LMX2571EPEVM 주문
- Ticspro-SW 및 PLLATINUMSIM-SW 다운로드 및 설치
- LMX2571EPEVM 사용 설명서 읽기
- TICSPRO-SW에 레지스터를 구성하고 PLLATINUMSIM-SW에서 성능 시뮬레이션
주문 및 개발 시작
평가 보드
LMX2571EPEVM — LMX2571-EP evaluation module for 1.34-GHz, low-power, extreme-temperature RF synthesizer
LMX2571EPEVM — LMX2571-EP evaluation module for 1.34-GHz, low-power, extreme-temperature RF synthesizer
설계 툴
PLLATINUMSIM-SW — PLL 루프 필터, 위상 잡음, 잠금 시간, 스퍼 시뮬레이션 툴
지원되는 제품 및 하드웨어
제품
RF PLL 및 신시사이저
오실레이터
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
PLLATINUMSIM-SW — PLL 루프 필터, 위상 잡음, 잠금 시간, 스퍼 시뮬레이션 툴
제품
RF PLL 및 신시사이저
오실레이터
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
출시 정보
Added cascaded phase noise analysis
새 소식
- Added cascaded phase noise analysis
지원 소프트웨어
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
지원되는 제품 및 하드웨어
제품
RF PLL 및 신시사이저
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.7.6 installer binary for Windows operating system
제품
RF PLL 및 신시사이저
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
문서
TICS Pro 1.7.7.6 Software Manifest
TICS Pro 1.7.7.6 Release Notes
출시 정보
Added Features
LMK5Bxxyyy, LMK5Cxxyyy
- Warnings and errors improved, particularly corrective suggestions
- REFx_FREQ=0 automatically disables DPLL reference input selection for that input
- Input validation enabled and disabled by start page settings, including 1PPS
- APLL reference selection moved to Step 5, just before clock output definition
- Quick-set multiple outputs to the same settings on frequency planner
- BAW VCO allows some ppm deviation
- Force SYSREF option on OUT0/1
- Expose DPLLx_LCK_TIMER field
- Match LMK05318B EEPROM page design
- .EPR export option
- EEPROM SRAM programming generation support
- For complete changelist, see release notes
LMK3H0102
- Configuration search tool
- Wizard: voltage selection option
Bug Fixes
- LMK04832-SP, LMK04832-SEP, LMK04714-Q1, LMK04368-EP - PD_FIN0 corrected to FIN0_PD
- LMK3H0102 - Several wizard bugfixes
Known Issues
- LMK5C33216 - When cascading from VCO3 to DPLL input, the divide value must manually be entered into DPLLx_REF5_RDIV as ( VCO3 output frequency / DPLLx TDC frequency )
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
설계 파일
기술 자료
=
TI에서 선정한 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | EVM User's guide | LMX2571EPEVM User's Guide (Rev. A) | PDF | HTML | 2022. 5. 5 | |
| 인증서 | LMX2571EPEVM EU Declaration of Conformity (DoC) | 2021. 3. 9 |