제품 상세 정보

Frequency (max) (MHz) 1344 Frequency (min) (MHz) 10 Normalized PLL phase noise (dBc/Hz) -231 1/f noise (10-kHz offset at 1-GHz carrier) (dBc/Hz) -124 Features FSK modulation, Integer-boundary spurs (IBS) suppression, Integrated VCO, Wideband Current consumption (mA) 39 Integrated VCO Yes Operating temperature range (°C) -55 to 125 Rating HiRel Enhanced Product Lock time (µs) (typ) (s) 140
Frequency (max) (MHz) 1344 Frequency (min) (MHz) 10 Normalized PLL phase noise (dBc/Hz) -231 1/f noise (10-kHz offset at 1-GHz carrier) (dBc/Hz) -124 Features FSK modulation, Integer-boundary spurs (IBS) suppression, Integrated VCO, Wideband Current consumption (mA) 39 Integrated VCO Yes Operating temperature range (°C) -55 to 125 Rating HiRel Enhanced Product Lock time (µs) (typ) (s) 140
VQFN (RHH) 36 36 mm² 6 x 6
  • VID#: V62/21613-01XE
  • -55 °C to +125 °C Operating Temperature
  • Any Frequency From 10 MHz to 1344 MHz
  • Low Phase Noise and Spurs
    • –123 dBc/Hz at 12.5-kHz Offset at 480 MHz
    • –145 dBc/Hz at 1-MHz Offset at 480 MHz
    • Normalized PLL Noise Floor of –231 dBc/Hz
    • Spurious Better Than –75 dBc/Hz
  • New FastLock to Reduce Lock Time
  • A Novel Technique to Remove Integer Boundary Spurs
  • Integrated 5-V Charge Pump and Output Divider for External VCO Operation
  • 2-, 4-, and 8-Level or Arbitrary Level Direct Digital FSK Modulation
  • One TX/RX Output or Two Fanout Outputs
  • Low Current Consumption
    • 39-mA Typical Synthesizer Mode (Internal VCO)
    • 9-mA Typical PLL Mode (External VCO)
  • 24-Bit Fractional-N Delta Sigma Modulator
  • Functional Differences between LMX2571 vs LMX2571-EP
    • LMX2571-EP has no TrCtl Pin
    • LMX2571-EP has no OSCin* pin, Differential Mode, or Crystal Mode
  • VID#: V62/21613-01XE
  • -55 °C to +125 °C Operating Temperature
  • Any Frequency From 10 MHz to 1344 MHz
  • Low Phase Noise and Spurs
    • –123 dBc/Hz at 12.5-kHz Offset at 480 MHz
    • –145 dBc/Hz at 1-MHz Offset at 480 MHz
    • Normalized PLL Noise Floor of –231 dBc/Hz
    • Spurious Better Than –75 dBc/Hz
  • New FastLock to Reduce Lock Time
  • A Novel Technique to Remove Integer Boundary Spurs
  • Integrated 5-V Charge Pump and Output Divider for External VCO Operation
  • 2-, 4-, and 8-Level or Arbitrary Level Direct Digital FSK Modulation
  • One TX/RX Output or Two Fanout Outputs
  • Low Current Consumption
    • 39-mA Typical Synthesizer Mode (Internal VCO)
    • 9-mA Typical PLL Mode (External VCO)
  • 24-Bit Fractional-N Delta Sigma Modulator
  • Functional Differences between LMX2571 vs LMX2571-EP
    • LMX2571-EP has no TrCtl Pin
    • LMX2571-EP has no OSCin* pin, Differential Mode, or Crystal Mode

The LMX2571-EP device is a low-power, high-performance, wideband PLLatinum™ RF synthesizer that integrates a delta-sigma fractional N PLL, multiple core voltage-controlled oscillator (VCO), programmable output dividers and two output buffers. The VCO cores work up to 5.376 GHz resulting in continuous output frequency range of 10 MHz to 1344 MHz.

This synthesizer can also be used with an external VCO. To that end, a dedicated 5-V charge pump and an output divider are available for this configuration.

A unique programmable multiplier is also incorporated to help improve spurs, allowing the system to use every channel even if it falls on an integer boundary.

The output has an integrated SPDT switch that can be used as a transmit and receive switch in FDD radio application. Both outputs can also be turned on to provide 2 outputs at the same time.

The LMX2571-EP supports direct digital FSK modulation through programming or pins. Discrete level FSK, pulse shaping FSK, and analog FM modulation are supported.

A new FastLock technique can be used allowing the user to step from one frequency to the next in less than 1.5 ms even when an external VCO is used with a narrow band loop filter.

The LMX2571-EP device is a low-power, high-performance, wideband PLLatinum™ RF synthesizer that integrates a delta-sigma fractional N PLL, multiple core voltage-controlled oscillator (VCO), programmable output dividers and two output buffers. The VCO cores work up to 5.376 GHz resulting in continuous output frequency range of 10 MHz to 1344 MHz.

This synthesizer can also be used with an external VCO. To that end, a dedicated 5-V charge pump and an output divider are available for this configuration.

A unique programmable multiplier is also incorporated to help improve spurs, allowing the system to use every channel even if it falls on an integer boundary.

The output has an integrated SPDT switch that can be used as a transmit and receive switch in FDD radio application. Both outputs can also be turned on to provide 2 outputs at the same time.

The LMX2571-EP supports direct digital FSK modulation through programming or pins. Discrete level FSK, pulse shaping FSK, and analog FM modulation are supported.

A new FastLock technique can be used allowing the user to step from one frequency to the next in less than 1.5 ms even when an external VCO is used with a narrow band loop filter.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
LMX2571 활성 1.34GHz, FSK(주파수 편이 방식) 모듈레이션을 지원하는 저전력, 극한의 온도 RF 신시사이저 Commercial-grade equivalent with limited operating temperature range
비교 대상 장치와 유사한 기능
LMX2694-EP 활성 위상 동기화를 지원하는 향상된 제품 15GHz RF 신시사이저 Higher frequency and higher performance synthesizer

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
7개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet LMX2571-EP Low-Power, High-Performance PLLatinum RF Synthesizer With FSK Modulation datasheet (Rev. B) PDF | HTML 2022/06/01
Application note Practical Clocking Considerations That Give Your Next High-Speed Converter Design an Edge (Rev. A) PDF | HTML 2025/04/11
Application brief Compilation of RF Synthesizer Resources PDF | HTML 2024/10/22
Technical article How to implement FM modulation PDF | HTML 2017/08/03
Application note Frequency Shift Keying with LMX2571 2017/05/30
Application note LMX2571 Using a Programmable Input Multiplier to Minimize Integer Boundary Spurs 2016/01/12
Technical article Timing is Everything: Improving integer boundary spurs in fractional PLL synthesiz PDF | HTML 2015/08/05

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

지원 소프트웨어

TICSPRO-SW TICS Pro GUI and Live Programming Tool for Clocking Devices

Texas Instruments clocks and synthesizers (TICS) pro software is used to program the evaluation modules (EVMs) for product numbers with these prefixes: CDC, LMK and LMX. These products include phase-locked loops and voltage-controlled oscillators (PLL+VCO), synthesizers and clocking devices.

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

다운로드 옵션
설계 툴

CLOCK-TREE-ARCHITECT — 클록 트리 아키텍트 프로그래밍 소프트웨어

클록 트리 아키텍트는 시스템 요구 사항에 따라 클록 트리 솔루션을 생성하여 설계 프로세스를 간소화하는 클록 트리 합성 툴입니다. 이 툴은 광범위한 클로킹 제품 데이터베이스에서 데이터를 가져와 시스템 수준의 다중 칩 클로킹 솔루션을 생성합니다.
설계 툴

PLLATINUMSIM-SW PLL loop filter, phase noise, lock time, and spur simulation tool

PLLATINUMSIM-SW is a simulation tool that allows users to create detailed designs and simulations of our PLLatinum™ integrated circuits, which include the LMX series of phase-locked loops (PLLs) and synthesizers.

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

다운로드 옵션
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RHH) 36 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상