제품 상세 정보

Function Clock network synchronizer Number of outputs 8 Output type CML, HCSL, LVCMOS, LVDS, LVPECL RMS jitter (fs) 50 Features I2C, Integrated EEPROM, Pin programmable, SPI Output frequency (min) (MHz) 0.000000000001 Output frequency (max) (MHz) 800 Input type LVCMOS, LVDS, LVPECL, XTAL Supply voltage (min) (V) 3.135 Supply voltage (max) (V) 3.465 Operating temperature range (°C) -40 to 85 Number of input channels 2
Function Clock network synchronizer Number of outputs 8 Output type CML, HCSL, LVCMOS, LVDS, LVPECL RMS jitter (fs) 50 Features I2C, Integrated EEPROM, Pin programmable, SPI Output frequency (min) (MHz) 0.000000000001 Output frequency (max) (MHz) 800 Input type LVCMOS, LVDS, LVPECL, XTAL Supply voltage (min) (V) 3.135 Supply voltage (max) (V) 3.465 Operating temperature range (°C) -40 to 85 Number of input channels 2
VQFN (RGZ) 48 49 mm² 7 x 7
  • Ultra-low jitter BAW VCO based Ethernet clocks
    • 32fs typical RMS jitter at 312.5MHz with 4MHz 1st order high-pass filter (HPF)
    • 44fs typical RMS jitter at 156.25MHz with 4MHz 1st order HPF
    • 50fs typical/ 80fs maximum RMS jitter at 312.5MHz
    • 60fs typical/ 90fs maximum RMS jitter at 156.25MHz
  • One high-performance Digital Phase-Locked Loop (DPLL) paired with two Analog Phase-Locked Loops (APLLs):
    • 1mHz to 4kHz programmable DPLL loop bandwidth
    • < 1ppt per step DCO adjustment for IEEE 1588 PTP clock steering
  • Two differential or single-ended DPLL inputs
    • 2MHz to 800MHz input frequency
    • Digital holdover and hitless switching
  • Eight differential outputs with programmable AC-LVPECL, AC-CML, AC-LVDS, HSCL, and 1.8V LVCMOS output formats.
    • 2MHz to 800MHz input frequency
    • PCIe Gen 1 to 6 compliant
  • I2C, 3-wire SPI, or 4-wire SPI
  • 3.3V core supply and 1.8V, 2.5V, or 3.3V output supply
  • –40°C to +85°C operating temperature
  • Ultra-low jitter BAW VCO based Ethernet clocks
    • 32fs typical RMS jitter at 312.5MHz with 4MHz 1st order high-pass filter (HPF)
    • 44fs typical RMS jitter at 156.25MHz with 4MHz 1st order HPF
    • 50fs typical/ 80fs maximum RMS jitter at 312.5MHz
    • 60fs typical/ 90fs maximum RMS jitter at 156.25MHz
  • One high-performance Digital Phase-Locked Loop (DPLL) paired with two Analog Phase-Locked Loops (APLLs):
    • 1mHz to 4kHz programmable DPLL loop bandwidth
    • < 1ppt per step DCO adjustment for IEEE 1588 PTP clock steering
  • Two differential or single-ended DPLL inputs
    • 2MHz to 800MHz input frequency
    • Digital holdover and hitless switching
  • Eight differential outputs with programmable AC-LVPECL, AC-CML, AC-LVDS, HSCL, and 1.8V LVCMOS output formats.
    • 2MHz to 800MHz input frequency
    • PCIe Gen 1 to 6 compliant
  • I2C, 3-wire SPI, or 4-wire SPI
  • 3.3V core supply and 1.8V, 2.5V, or 3.3V output supply
  • –40°C to +85°C operating temperature

The LMK05318 is high-performance network synchronizer and jitter cleaner designed to meet the stringent requirements of Ethernet-based networking applications.

The device integrates one DPLL and two APLLs to provide hitless switching and jitter attenuation using the programmable loop bandwidths (LBWs) with one external loop filter capacitor to maximize the flexibility and ease of use.

APLL1 features an ultra-high performance PLL with TI’s proprietary Bulk Acoustic Wave (BAW) technology in VCO1 and can generate 312.5MHz output clocks with 50fs typical RMS jitter (12kHz to 20MHz) irrespective of the DPLL reference input frequency and jitter characteristics. APLL2 features a conventional LC VCO to provide options for a second frequency and/or synchronization domain.

The integrated EEPROM can be used for custom system configurations on start-up. Internal LDO regulators provide excellent power supply noise rejection (PSNR) to reduce the cost and complexity of the power delivery network.

The LMK05318 is high-performance network synchronizer and jitter cleaner designed to meet the stringent requirements of Ethernet-based networking applications.

The device integrates one DPLL and two APLLs to provide hitless switching and jitter attenuation using the programmable loop bandwidths (LBWs) with one external loop filter capacitor to maximize the flexibility and ease of use.

APLL1 features an ultra-high performance PLL with TI’s proprietary Bulk Acoustic Wave (BAW) technology in VCO1 and can generate 312.5MHz output clocks with 50fs typical RMS jitter (12kHz to 20MHz) irrespective of the DPLL reference input frequency and jitter characteristics. APLL2 features a conventional LC VCO to provide options for a second frequency and/or synchronization domain.

The integrated EEPROM can be used for custom system configurations on start-up. Internal LDO regulators provide excellent power supply noise rejection (PSNR) to reduce the cost and complexity of the power delivery network.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 드롭인 대체품
LMK05318B 활성 BAW를 지원하는 초저지터 단일 채널 네트워크 싱크로나이저 클록 This is a product revision with enhanced performance, pin compatibility and software compatibility

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
11개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet LMK05318 1-DPLL 2-APLL 2-IN 8-OUT Network Synchronizer With BAW VCO for Ethernet-Based Networking Applications datasheet (Rev. B) PDF | HTML 2025/12/10
Application note Termination Guidelines for Differential and Single-Ended Signals PDF | HTML 2025/12/10
Technical article Solving synchronization challenges in Industrial Ethernet PDF | HTML 2019/07/19
User guide LMK05318 Registers (Rev. A) 2019/07/08
Technical article TI BAW resonator innovation puts time on your side PDF | HTML 2019/03/05
Technical article Are you ready for BAW? PDF | HTML 2019/02/27
Application note ITU-T G.8262 compliance test results for the LMK05318 (Rev. A) 2019/02/22
Application note Supported synchronization modes for TI network synchronizers (Rev. A) 2019/02/22
Application note Understanding clocking needs for high-speed 56G PAM-4 serial links (Rev. A) 2019/02/22
White paper TI BAW technology enables ultra-low jitter clocks for high-speed networks 2019/02/17
Application note How to use the LMK05318 as a jitter cleaner 2019/01/16

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

지원 소프트웨어

TICSPRO-SW TICS Pro GUI and Live Programming Tool for Clocking Devices

Texas Instruments clocks and synthesizers (TICS) pro software is used to program the evaluation modules (EVMs) for product numbers with these prefixes: CDC, LMK and LMX. These products include phase-locked loops and voltage-controlled oscillators (PLL+VCO), synthesizers and clocking devices.

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

다운로드 옵션
시뮬레이션 모델

LMK05318 IBIS Model

SNAM226.ZIP (137 KB) - IBIS Model
설계 툴

CLOCK-TREE-ARCHITECT — 클록 트리 아키텍트 프로그래밍 소프트웨어

클록 트리 아키텍트는 시스템 요구 사항에 따라 클록 트리 솔루션을 생성하여 설계 프로세스를 간소화하는 클록 트리 합성 툴입니다. 이 툴은 광범위한 클로킹 제품 데이터베이스에서 데이터를 가져와 시스템 수준의 다중 칩 클로킹 솔루션을 생성합니다.
설계 툴

PLLATINUMSIM-SW PLLatinum Sim Tool

PLLATINUMSIM-SW is a simulation tool that allows users to create detailed designs and simulations of our PLLatinum™ integrated circuits, which include the LMX series of phase-locked loops (PLLs) and synthesizers.

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

다운로드 옵션
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGZ) 48 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상