SLVUCU5 December 2025 UCD91160 , UCD91320
When this bit is set, the reset pin is immediately asserted whenever any of the pages identified in the Page Flags leaves the power-good state or any of the GPI pins identified by the GPI Flags are deasserted. Whenever the reset pin is asserted because of the “Assert when NOT Power-Good” function, the device attempts to de-asserted the reset pin based on the Delay Time or a combination of the power good state of selected rails, the asserted state of selected GPIs, and the Delay Time. The Delay Time must be nonzero when this is the only enabled feature of the system reset function.