ZHCSNJ6B April   2021  – March 2023 TSER953

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Recommended Timing for the Serial Control Bus
    7. 6.7 Timing Diagrams
    8. 6.8 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 CSI-2 Receiver
        1. 7.3.1.1 CSI-2 Receiver Operating Modes
        2. 7.3.1.2 CSI-2 Receiver High-Speed Mode
        3. 7.3.1.3 CSI-2 Protocol Layer
        4. 7.3.1.4 CSI-2 Short Packet
        5. 7.3.1.5 CSI-2 Long Packet
        6. 7.3.1.6 CSI-2 Errors and Detection
          1. 7.3.1.6.1 CSI-2 ECC Detection and Correction
          2. 7.3.1.6.2 CSI-2 Check Sum Detection
          3. 7.3.1.6.3 D-PHY Error Detection
          4. 7.3.1.6.4 CSI-2 Receiver Status
      2. 7.3.2 V3Link Forward Channel Transmitter
        1. 7.3.2.1 Frame Format
      3. 7.3.3 V3Link Back Channel Receiver
      4. 7.3.4 Serializer Status and Monitoring
        1. 7.3.4.1 Forward Channel Diagnostics
        2. 7.3.4.2 Back Channel Diagnostics
        3. 7.3.4.3 Voltage and Temperature Sensing
          1. 7.3.4.3.1 Programming Example
        4. 7.3.4.4 Built-In Self Test
      5. 7.3.5 FrameSync Operation
        1. 7.3.5.1 External FrameSync
        2. 7.3.5.2 Internally Generated FrameSync
      6. 7.3.6 GPIO Support
        1. 7.3.6.1 GPIO Status
        2. 7.3.6.2 GPIO Input Control
        3. 7.3.6.3 GPIO Output Control
        4. 7.3.6.4 Forward Channel GPIO
        5. 7.3.6.5 Back Channel GPIO
    4. 7.4 Device Functional Modes
      1. 7.4.1 Clocking Modes
        1. 7.4.1.1 Synchronous Mode
        2. 7.4.1.2 Non-Synchronous Clock Mode
        3. 7.4.1.3 Non-Synchronous Internal Mode
        4. 7.4.1.4 DVP Compatibility Mode
        5. 7.4.1.5 Configuring CLK_OUT
      2. 7.4.2 MODE
    5. 7.5 Programming
      1. 7.5.1 I2C Interface Configuration
        1. 7.5.1.1 CLK_OUT/IDX
          1. 7.5.1.1.1 IDX
      2. 7.5.2 I2C Interface Operation
      3. 7.5.3 I2C Timing
    6. 7.6 Pattern Generation
      1. 7.6.1 Reference Color Bar Pattern
      2. 7.6.2 Fixed Color Patterns
      3. 7.6.3 Packet Generator Programming
        1. 7.6.3.1 Determining Color Bar Size
      4. 7.6.4 Code Example for Pattern Generator
    7. 7.7 Register Maps
      1. 7.7.1   I2C Device ID Register
      2. 7.7.2   Reset
      3. 7.7.3   General Configuration
      4. 7.7.4   Forward Channel Mode Selection
      5. 7.7.5   BC_MODE_SELECT
      6. 7.7.6   PLL Clock Control
      7. 7.7.7   Clock Output Control 0
      8. 7.7.8   Clock Output Control 1
      9. 7.7.9   Back Channel Watchdog Control
      10. 7.7.10  I2C Control 1
      11. 7.7.11  I2C Control 2
      12. 7.7.12  SCL High Time
      13. 7.7.13  SCL Low Time
      14. 7.7.14  Local GPIO DATA
      15. 7.7.15  GPIO Input Control
      16. 7.7.16  RESERVED Register
      17. 7.7.17  DVP_CFG
      18. 7.7.18  DVP_DT
      19. 7.7.19  RESERVED Register
      20. 7.7.20  Force BIST Error
      21. 7.7.21  Remote BIST Control
      22. 7.7.22  Sensor Voltage Gain
      23. 7.7.23  RESERVED Register
      24. 7.7.24  Sensor Control 0
      25. 7.7.25  Sensor Control 1
      26. 7.7.26  Voltage Sensor 0 Thresholds
      27. 7.7.27  Voltage Sensor 1 Thresholds
      28. 7.7.28  Temperature Sensor Thresholds
      29. 7.7.29  CSI-2 Alarm Enable
      30. 7.7.30  Alarm Sense Enable
      31. 7.7.31  Back Channel Alarm Enable
      32. 7.7.32  RESERVED Register
      33. 7.7.33  CSI-2 Polarity Select
      34. 7.7.34  CSI-2 LP Mode Polarity
      35. 7.7.35  CSI-2 High-Speed RX Enable
      36. 7.7.36  CSI-2 Low Power Enable
      37. 7.7.37  CSI-2 Termination Enable
      38. 7.7.38  RESERVED Register
      39. 7.7.39  RESERVED Register
      40. 7.7.40  RESERVED Register
      41. 7.7.41  RESERVED Register
      42. 7.7.42  RESERVED Register
      43. 7.7.43  RESERVED Register
      44. 7.7.44  RESERVED Register
      45. 7.7.45  RESERVED Register
      46. 7.7.46  CSI-2 Packet Header Control
      47. 7.7.47  Back Channel Configuration
      48. 7.7.48  Datapath Control 1
      49. 7.7.49  RESERVED Register
      50. 7.7.50  Remote Partner Capabilities 1
      51. 7.7.51  RESERVED Register
      52. 7.7.52  Partner Deserializer ID
      53. 7.7.53  RESERVED Register
      54. 7.7.54  Target 0 ID
      55. 7.7.55  Target 1 ID
      56. 7.7.56  Target 2 ID
      57. 7.7.57  Target 3 ID
      58. 7.7.58  Target 4 ID
      59. 7.7.59  Target 5 ID
      60. 7.7.60  Target 6 ID
      61. 7.7.61  Target 7 ID
      62. 7.7.62  Target 0 Alias
      63. 7.7.63  Target 1 Alias
      64. 7.7.64  Target 2 Alias
      65. 7.7.65  Target 3 Alias
      66. 7.7.66  Target 4 Alias
      67. 7.7.67  Target 5 Alias
      68. 7.7.68  Target 6 Alias
      69. 7.7.69  Target 7 Alias
      70. 7.7.70  Back Channel Control
      71. 7.7.71  Revision ID
      72. 7.7.72  Device Status
      73. 7.7.73  General Status
      74. 7.7.74  GPIO Pin Status
      75. 7.7.75  BIST Error Count
      76. 7.7.76  CRC Error Count 1
      77. 7.7.77  CRC Error Count 2
      78. 7.7.78  Sensor Status
      79. 7.7.79  Sensor V0
      80. 7.7.80  Sensor V1
      81. 7.7.81  Sensor T
      82. 7.7.82  RESERVED Register
      83. 7.7.83  CSI-2 Error Count
      84. 7.7.84  CSI-2 Error Status
      85. 7.7.85  CSI-2 Errors Data Lanes 0 and 1
      86. 7.7.86  CSI-2 Errors Data Lanes 2 and 3
      87. 7.7.87  CSI-2 Errors Clock Lane
      88. 7.7.88  CSI-2 Packet Header Data
      89. 7.7.89  Packet Header Word Count 0
      90. 7.7.90  Packet Header Word Count 1
      91. 7.7.91  CSI-2 ECC
      92. 7.7.92  RESERVED Register
      93. 7.7.93  RESERVED Register
      94. 7.7.94  RESERVED Register
      95. 7.7.95  RESERVED Register
      96. 7.7.96  RESERVED Register
      97. 7.7.97  RESERVED Register
      98. 7.7.98  RESERVED Register
      99. 7.7.99  RESERVED Register
      100. 7.7.100 RESERVED Register
      101. 7.7.101 RESERVED Register
      102. 7.7.102 RESERVED Register
      103. 7.7.103 RESERVED Register
      104. 7.7.104 RESERVED Register
      105. 7.7.105 RESERVED Register
      106. 7.7.106 RESERVED Register
      107. 7.7.107 RESERVED Register
      108. 7.7.108 RESERVED Register
      109. 7.7.109 RESERVED Register
      110. 7.7.110 RESERVED Register
      111. 7.7.111 RESERVED Register
      112. 7.7.112 RESERVED Register
      113. 7.7.113 RESERVED Register
      114. 7.7.114 RESERVED Register
      115. 7.7.115 RESERVED Register
      116. 7.7.116 RESERVED Register
      117. 7.7.117 RESERVED Register
      118. 7.7.118 RESERVED Register
      119. 7.7.119 RESERVED Register
      120. 7.7.120 RESERVED Register
      121. 7.7.121 RESERVED Register
      122. 7.7.122 RESERVED Register
      123. 7.7.123 IND_ACC_CTL
      124. 7.7.124 IND_ACC_ADDR
      125. 7.7.125 IND_ACC_DATA
      126. 7.7.126 RESERVED Register
      127. 7.7.127 V3LINK_TX_ID0
      128. 7.7.128 V3LINK_TX_ID1
      129. 7.7.129 V3LINK_TX_ID2
      130. 7.7.130 V3LINK_TX_ID3
      131. 7.7.131 V3LINK_TX_ID4
      132. 7.7.132 V3LINK_TX_ID5
      133. 7.7.133 Indirect Access Registers
        1. 7.7.133.1  Reserved
        2. 7.7.133.2  PGEN_CTL
        3. 7.7.133.3  PGEN_CFG
        4. 7.7.133.4  PGEN_CSI_DI
        5. 7.7.133.5  PGEN_LINE_SIZE1
        6. 7.7.133.6  PGEN_LINE_SIZE0
        7. 7.7.133.7  PGEN_BAR_SIZE1
        8. 7.7.133.8  PGEN_BAR_SIZE0
        9. 7.7.133.9  PGEN_ACT_LPF1
        10. 7.7.133.10 PGEN_ACT_LPF0
        11. 7.7.133.11 PGEN_TOT_LPF1
        12. 7.7.133.12 PGEN_TOT_LPF0
        13. 7.7.133.13 PGEN_LINE_PD1
        14. 7.7.133.14 PGEN_LINE_PD0
        15. 7.7.133.15 PGEN_VBP
        16. 7.7.133.16 PGEN_VFP
        17. 7.7.133.17 PGEN_COLOR0
        18. 7.7.133.18 PGEN_COLOR1
        19. 7.7.133.19 PGEN_COLOR2
        20. 7.7.133.20 PGEN_COLOR3
        21. 7.7.133.21 PGEN_COLOR4
        22. 7.7.133.22 PGEN_COLOR5
        23. 7.7.133.23 PGEN_COLOR6
        24. 7.7.133.24 PGEN_COLOR7
        25. 7.7.133.25 PGEN_COLOR8
        26. 7.7.133.26 PGEN_COLOR9
        27. 7.7.133.27 PGEN_COLOR10
        28. 7.7.133.28 PGEN_COLOR11
        29. 7.7.133.29 PGEN_COLOR12
        30. 7.7.133.30 PGEN_COLOR13
        31. 7.7.133.31 PGEN_COLOR14
        32. 7.7.133.32 PGEN_COLOR15
  8. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Power-over-Coax
    2. 8.2 Typical Applications
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 CSI-2 Interface
        2. 8.2.2.2 V3Link Input / Output
        3. 8.2.2.3 Internal Regulator Bypassing
        4. 8.2.2.4 Loop Filter Decoupling
      3. 8.2.3 Application Curve
  9. 9 Power Supply Recommendations
    1. 9.1 Power-Up Sequencing
      1. 9.1.1 System Initialization
    2. 9.2 Power Down (PDB)
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 CSI-2 Guidelines
    2. 10.2 Layout Examples
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Receiving Notification of Documentation Updates
    3. 11.3 支持资源
    4. 11.4 Trademarks
    5. 11.5 静电放电警告
    6. 11.6 术语表
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

3 说明

TSER953 串行器是 TI V3Link 器件系列的一部分，旨在支持高速原始数据传感器，包括 60fps 的 2.3MP 成像器以及 4MP 30fps 摄像头、卫星雷达、激光雷达和飞行时间 (ToF) 传感器。该器件提供 4.16Gbps 正向通道和超低延迟的 50Mbps 双向控制通道，并支持单根同轴 (PoC) 或 STP 电缆进行供电。TSER953 具有高级数据保护和诊断功能，可支持机器人和自动化、医疗成像以及安全或监控等各种应用的高速数据传输，同时简化工业和医疗摄像头应用的设计。TSER953 与配套的解串器一起提供精确的多摄像头传感器时钟和传感器同步。

该串行器采用 5mm × 5mm 的小型 VQFN 封装，非常适合空间受限型传感器应用。

器件信息
器件型号封装 (1)封装尺寸（标称值）
TSER953VQFN (32)5.00mm × 5.00mm
(1) 要了解所有可用封装，请见数据表末尾的可订购产品附录。
GUID-20210517-CA0I-D3Z5-L2J9-PT9D0RP70TPB-low.svg典型应用