产品详细信息

Function Serializer Color depth (bpp) 24 Input compatibility MIPI CSI-2 Pixel clock frequency (Max) (MHz) 100 Output compatibility V3Link Features CRC, Flexible GPIOs, I2C Config, Pattern Generation Signal conditioning DC Balance EMI reduction LVDS Diagnostics BIST Operating temperature range (C) -20 to 85
Function Serializer Color depth (bpp) 24 Input compatibility MIPI CSI-2 Pixel clock frequency (Max) (MHz) 100 Output compatibility V3Link Features CRC, Flexible GPIOs, I2C Config, Pattern Generation Signal conditioning DC Balance EMI reduction LVDS Diagnostics BIST Operating temperature range (C) -20 to 85
VQFN (RHB) 32 25 mm² 5 x 5
  • 4.16-Gbps grade serializer supports high-speed sensors including full HD 1080p 2.3MP 60-fps and 4MP 30-fps imagers
  • Low (0.25 W typical) power consumption
  • IEC 61000-4-2 ESD compliant
  • Power-over-Coax (PoC) compatible transceiver
  • D-PHY v1.2 and CSI-2 v1.3 compliant system interface
    • Up to 4 data lanes at 832 Mbps per each lane
    • Supports up to four virtual channels
  • Precision multi-camera clocking and synchronization
  • Flexible programmable output clock generator
  • Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I2C write protection, voltage and temperature measurement, programmable alarm, and line fault detection
  • Supports Single-ended coaxial or shielded-twisted-pair (STP) cable
  • Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
  • Single 1.8-V power supply
  • Compatible with TDES954 and TDES960 deserializers
  • Wide temperature range: –20°C to 85°C
  • Small 5-mm × 5-mm VQFN package and PoC solution size for compact camera module designs
  • 4.16-Gbps grade serializer supports high-speed sensors including full HD 1080p 2.3MP 60-fps and 4MP 30-fps imagers
  • Low (0.25 W typical) power consumption
  • IEC 61000-4-2 ESD compliant
  • Power-over-Coax (PoC) compatible transceiver
  • D-PHY v1.2 and CSI-2 v1.3 compliant system interface
    • Up to 4 data lanes at 832 Mbps per each lane
    • Supports up to four virtual channels
  • Precision multi-camera clocking and synchronization
  • Flexible programmable output clock generator
  • Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I2C write protection, voltage and temperature measurement, programmable alarm, and line fault detection
  • Supports Single-ended coaxial or shielded-twisted-pair (STP) cable
  • Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
  • Single 1.8-V power supply
  • Compatible with TDES954 and TDES960 deserializers
  • Wide temperature range: –20°C to 85°C
  • Small 5-mm × 5-mm VQFN package and PoC solution size for compact camera module designs

The TSER953 serializer is part of TI’s V3Link device family designed to support high-speed raw data sensors including 2.3MP imagers at 60-fps and as well as 4MP, 30-fps cameras, satellite RADAR, LIDAR, and Time-of-Flight (ToF) sensors. The device delivers a 4.16-Gbps forward channel and an ultra-low latency, 50-Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. The TSER953 features advanced data protection and diagnostic features to support high-speed data transmission for various applications, such as robotics and automation, medical imaging, and security or surveillance, while streamlining design in industrial and medical camera applications. Together with a companion deserializer, the TSER953 delivers precise multi-camera sensor clock and sensor synchronization.

The serializer comes in a small 5-mm × 5-mm VQFN package for space-constrained sensor applications.

The TSER953 serializer is part of TI’s V3Link device family designed to support high-speed raw data sensors including 2.3MP imagers at 60-fps and as well as 4MP, 30-fps cameras, satellite RADAR, LIDAR, and Time-of-Flight (ToF) sensors. The device delivers a 4.16-Gbps forward channel and an ultra-low latency, 50-Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. The TSER953 features advanced data protection and diagnostic features to support high-speed data transmission for various applications, such as robotics and automation, medical imaging, and security or surveillance, while streamlining design in industrial and medical camera applications. Together with a companion deserializer, the TSER953 delivers precise multi-camera sensor clock and sensor synchronization.

The serializer comes in a small 5-mm × 5-mm VQFN package for space-constrained sensor applications.

下载

技术文档

star = 有关此产品的 TI 精选热门文档
未找到结果。请清除搜索,并重试。
查看全部 2
类型 项目标题 下载最新的英语版本 日期
* 数据表 TSER953 4.16-Gbps V3Link Serializer With MIPI CSI-2 Interface for High-Speed, High-Resolution Cameras, RADAR, and Other Sensors 数据表 (Rev. A) PDF | HTML 25 May 2021
技术文章 How to transfer high-resolution video data over a single wire in machine vision-based applications 12 Jul 2021

设计和开发

如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。

评估板

DS90UB953-Q1EVM — 用于 2MP/60fps 摄像头和雷达的 DS90UB953-Q1 2MP MIPI® CSI-2 FPD-Link III 串行器评估模块

德州仪器 (TI) DS90UB953-Q1 EVM 评估模块 (EVM) 可帮助系统设计人员评估 DS90UB953-Q1 2MP MIPI CSI-2 FPD-Link III 串行器 (SER) 的运行情况和性能。该器件可将最多 4 个 MIPI CSI-2 通道的数据(每个数据以 830Mbps 速率运行)转换为通过一根 50 欧姆同轴电缆传输的高速串行 FPD-Link III 接口。
TI.com 無法提供
仿真模型

TSER953 IBIS Model TSER953 IBIS Model

模拟工具

PSPICE-FOR-TI 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
模拟工具

TINA-TI 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能,允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装,如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表,请参阅:SpiceRack - 完整列表 

需要 HSpice (...)

封装 引脚数 下载
VQFN (RHB) 32 了解详情

订购和质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持与培训

视频