SLLA651 April   2025 TCAN2845-Q1 , TCAN2847-Q1 , TCAN2855-Q1 , TCAN2857-Q1

1.   1
2.   Abstract
3.   Trademarks
4. 1Introduction
5. 2Device States
   1. 2.1 Init Mode
   2. 2.2 Restart Mode
   3. 2.3 Standby Mode
   4. 2.4 Normal Mode
   5. 2.5 Sleep Mode
   6. 2.6 Fail-Safe Mode
6. 3Power Electronics
   1. 3.1 VSUP
   2. 3.2 VHSS
   3. 3.3 VCAN
   4. 3.4 VCC1
   5. 3.5 VCC2
   6. 3.6 VEXMON, VEXCTRL, and VEXCC
   7. 3.7 HSSx
7. 4Communication Capabilities
   1. 4.1 CAN-FD and Classical CAN
   2. 4.2 CAN-SIC
   3. 4.3 LIN
8. 5Protection Features
   1. 5.1 Undervoltage (UV) Monitors
      1. 5.1.1 VSUP
      2. 5.1.2 VHSS
      3. 5.1.3 VCAN
      4. 5.1.4 VEXCC
      5. 5.1.5 VCC1
      6. 5.1.6 VCC2
   2. 5.2 Overvoltage (OV) Monitors
      1. 5.2.1 HSSx
      2. 5.2.2 VCC1
      3. 5.2.3 VCC2
      4. 5.2.4 VEXCC
   3. 5.3 Short Circuit (SC) Monitors
      1. 5.3.1 VCC1
      2. 5.3.2 VCC2
      3. 5.3.3 VEXCC
   4. 5.4 Electrical Faults and Impact on SBC Mode
   5. 5.5 Temperature Sensors
   6. 5.6 Watchdog
      1. 5.6.1 Watchdog Error Counter
      2. 5.6.2 Timeout
      3. 5.6.3 Window
      4. 5.6.4 Initial Long Window
      5. 5.6.5 Q&A
   7. 5.7 Communication Fault Monitoring
      1. 5.7.1 CAN
      2. 5.7.2 LIN
   8. 5.8 LIMP
9. 6Programming, Memory, and Control
   1. 6.1 SPI
   2. 6.2 EEPROM
   3. 6.3 Interrupts
   4. 6.4 Control
10. 7Miscellaneous Features
    1. 7.1 Local Wake Ups
    2. 7.2 CAN Bus Wake Up (BWRR)
    3. 7.3 Partial Networking
    4. 7.4 GFO, nRST, and SW
11. 8Summary
12. 9References