首頁 介面 高速 SerDes V3Link SerDes
首頁
介面
高速 SerDes
V3Link SerDes

TSER953

現行

適用高速感測器的 4.16-Gbps MIPI® CSI-2 V³Link 串聯器

立即訂購
產品規格表

TSER953

現行
產品規格表 立即訂購

產品詳細資料

Applications Camera SerDes Color depth (bpp) 24 Function Serializer Input compatibility MIPI CSI-2 Pixel clock frequency (max) (MHz) 100 Output compatibility V3Link Features CRC, Flexible GPIOs, I2C Config, Pattern Generation Signal conditioning DC Balance EMI reduction LVDS Diagnostics BIST Rating Catalog Operating temperature range (°C) -20 to 85
Applications Camera SerDes Color depth (bpp) 24 Function Serializer Input compatibility MIPI CSI-2 Pixel clock frequency (max) (MHz) 100 Output compatibility V3Link Features CRC, Flexible GPIOs, I2C Config, Pattern Generation Signal conditioning DC Balance EMI reduction LVDS Diagnostics BIST Rating Catalog Operating temperature range (°C) -20 to 85
VQFN (RHB) 32 25 mm² 5 x 5
  • 4.16Gbps grade serializer supports high-speed sensors including full HD 1080p 2.3MP 60fps and 4MP 30fps imagers
  • Low (0.28W typical) power consumption
  • IEC 61000-4-2 ESD compliant
  • Power-over-Coax (PoC) compatible transceiver
  • D-PHY v1.2 and CSI-2 v1.3 compliant system interface
    • Up to 4 data lanes at 832Mbps per each lane
    • Supports up to four virtual channels
  • Precision multi-camera clocking and synchronization
  • Flexible programmable output clock generator
  • Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I2C write protection, voltage and temperature measurement, programmable alarm, and line fault detection
  • Supports Single-ended coaxial or shielded-twisted-pair (STP) cable
  • Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
  • Single 1.8V power supply
  • Compatible with TDES954 and TDES960 deserializers
  • Wide temperature range: –20°C to 85°C
  • Small 5mm × 5mm VQFN package and PoC solution size for compact camera module designs
  • 4.16Gbps grade serializer supports high-speed sensors including full HD 1080p 2.3MP 60fps and 4MP 30fps imagers
  • Low (0.28W typical) power consumption
  • IEC 61000-4-2 ESD compliant
  • Power-over-Coax (PoC) compatible transceiver
  • D-PHY v1.2 and CSI-2 v1.3 compliant system interface
    • Up to 4 data lanes at 832Mbps per each lane
    • Supports up to four virtual channels
  • Precision multi-camera clocking and synchronization
  • Flexible programmable output clock generator
  • Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I2C write protection, voltage and temperature measurement, programmable alarm, and line fault detection
  • Supports Single-ended coaxial or shielded-twisted-pair (STP) cable
  • Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
  • Single 1.8V power supply
  • Compatible with TDES954 and TDES960 deserializers
  • Wide temperature range: –20°C to 85°C
  • Small 5mm × 5mm VQFN package and PoC solution size for compact camera module designs

The TSER953 serializer is part of TI’s V3Link device family designed to support high-speed raw data sensors including 2.3MP imagers at 60fps and as well as 4MP, 30fps cameras, satellite RADAR, LIDAR, and Time-of-Flight (ToF) sensors. The device delivers a 4.16-Gbps forward channel and an ultra-low latency, 50-Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. The TSER953 features advanced data protection and diagnostic features to support high-speed data transmission for various applications, such as robotics and automation, medical imaging, and security or surveillance, while streamlining design in industrial and medical camera applications. Together with a companion deserializer, the TSER953 delivers precise multi-camera sensor clock and sensor synchronization.

The serializer comes in a small 5mm × 5mm VQFN package for space-constrained sensor applications.

The TSER953 serializer is part of TI’s V3Link device family designed to support high-speed raw data sensors including 2.3MP imagers at 60fps and as well as 4MP, 30fps cameras, satellite RADAR, LIDAR, and Time-of-Flight (ToF) sensors. The device delivers a 4.16-Gbps forward channel and an ultra-low latency, 50-Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. The TSER953 features advanced data protection and diagnostic features to support high-speed data transmission for various applications, such as robotics and automation, medical imaging, and security or surveillance, while streamlining design in industrial and medical camera applications. Together with a companion deserializer, the TSER953 delivers precise multi-camera sensor clock and sensor synchronization.

The serializer comes in a small 5mm × 5mm VQFN package for space-constrained sensor applications.
filter 尋找其它 V3Link SerDes
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 日期
* Data sheet TSER953 4.16-Gbps V3 Link Serializer With MIPI CSI-2 Interface for High-Speed, High-Resolution Cameras, RADAR, and Other Sensors datasheet (Rev. C) PDF | HTML 2024年 7月 10日
Application note Developing Multiple-Camera Applications on AM6x (Rev. A) PDF | HTML 2024年 2月 14日
Technical article How to transfer high-resolution video data over a single wire in machine vision-ba PDF | HTML 2021年 7月 12日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DS90UB953-Q1EVM — 適用於 200 萬像素/60fps 攝影機和雷達的 DS90UB953-Q1 200 萬像素 MIPI® CSI-2 FPD-Link III 串聯器評估模組

德州儀器 DS90UB953-Q1EVM 評估模組 (EVM) 可協助您評估 DS90UB953-Q1 2MP MIPI® CSI-2 FPD-Link III 串聯器 (SER) 的運作及性能。本裝置可轉換多達 4 個 MIPI CSI-2 通道的資料，各通道以 830Mbps 的速度運作，並透過單一 50Ω 同軸纜線將資料傳輸至高速串聯 FPD-Link III 介面。
使用指南: PDF | HTML
TI.com 無法提供
開發套件

ARDCM-3P-V3LINK-CAM — ArduCam 多通道攝影機模組快速原型套件以 V3Link SerDes 裝置為基礎

Arducam 的 V3Link 攝影機套件擁有全高畫質，配備 IMX219 感測器和 V3Link 介面，是高頻寬、長距離視覺投影的首選。採用屏蔽式同軸纜線，確保在長達 10 公尺的距離內提供可靠電力與資料傳輸，並維持低延遲以達最佳效能。

此套件配備 4 個 8-MP 攝影機模組，可靈活切換頻道或獨立控制。實現多攝影機同步與遠端控制，提供無與倫比的靈活性和便利性。

從：ArduCam
View Options
光學模組

ECON-3P-NEDUCAM — e-con Systems NeduCAM camera modules based on FPD-Link III serializers

NeduCAM is a product family of camera modules based combining various image sensors with an FPD-Link III serializer for supporting multiple remotely located cameras through serial connections to a host processor. 

NeduCAMxx products are the camera module only, which is a fully-assembled 2-board (...)

從：e-con Systems Inc.
View Options
Third-party accessory

TECHN-3P-VLI-X-SL — TechNexion VizionLink fully-enclosed, IP68 camera modules based on FPD-Link III serializers, S-mount

Fully-enclosed, IP68 camera modules from TechNexion based on FPD-Link III serializers compatible with evaluation modules (EVMs) and single-board computers (SBCs) featuring AM6x and TDA4x processors.

Each camera module is based on color image sensors with varying resolution and performance for a (...)

從：TechNexion
View Options
應用軟體及架構

ALP — Analog LaunchPad Framework Utility

Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:

  • Local and remote device access
  • (...)
支援產品和硬體

支援產品和硬體
下載
支援軟體

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:

  • Local and remote device access
  • (...)
支援產品和硬體

支援產品和硬體
下載
模擬型號

TSER953 IBIS Model

SNLM246.ZIP (47 KB) - IBIS Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHB) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片