首頁 介面 高速 SerDes FPD-Link SerDes
首頁
介面
高速 SerDes
FPD-Link SerDes

DS90UB964-Q1

現行

適用 1 MP 攝影機且具雙 CSI-2 輸出埠的四 1 MP 攝影機集線器 FPD-Link III 解串器

立即訂購
產品規格表

DS90UB964-Q1

現行
產品規格表 立即訂購

產品詳細資料

Applications Advanced Driver Assistance Systems (ADAS) Input compatibility FPD-Link III LVDS Function Deserializer Output compatibility MIPI CSI-2 Color depth (bpp) 12 Features Low-EMI Point-to-Point Communication Signal conditioning Adaptive Equalizer EMI reduction LVDS Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105
Applications Advanced Driver Assistance Systems (ADAS) Input compatibility FPD-Link III LVDS Function Deserializer Output compatibility MIPI CSI-2 Color depth (bpp) 12 Features Low-EMI Point-to-Point Communication Signal conditioning Adaptive Equalizer EMI reduction LVDS Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105
VQFN (RGC) 64 81 mm² 9 x 9
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 2: –40℃ to +105℃ ambient operating temperature range
    • Device HBM ESD classification level ±4kV
    • Device CDM ESD classification level C6
  • Aggregates data from up to 4 sensors over FPD-Link III interface
  • Supports 1-megapixel sensors with HD 720p/800p/960p resolution at 30Hz or 60Hz frame rate
  • Multi-camera synchronization
  • MIPI D-PHY version 1.2 / CSI-2 version 1.3 compliant
    • 2 × MIPI CSI-2 output ports
    • Supports 1, 2, 3, 4 data lanes per CSI-2 port
    • CSI-2 data rate scalable for 400Mbps / 800Mbps / 1.5Gbps / 1.6Gbps per data lane
    • Programmable data types
    • Four virtual channels
    • ECC and CRC generation
  • Supports single-ended coaxial including Power-over-Coax (PoC) or Shielded Twisted-Pair (STP) cable
  • Adaptive receive equalization
  • I2C with fast-mode plus up to 1Mbps
  • Flexible GPIOs for sensor synchronization and diagnostics
  • Compatible with DS90UB933-Q1/DS90UB913A-Q1 serializers
  • CRC protection on the internal data path
  • ISO 10605 and IEC 61000-4-2 ESD compliant
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 2: –40℃ to +105℃ ambient operating temperature range
    • Device HBM ESD classification level ±4kV
    • Device CDM ESD classification level C6
  • Aggregates data from up to 4 sensors over FPD-Link III interface
  • Supports 1-megapixel sensors with HD 720p/800p/960p resolution at 30Hz or 60Hz frame rate
  • Multi-camera synchronization
  • MIPI D-PHY version 1.2 / CSI-2 version 1.3 compliant
    • 2 × MIPI CSI-2 output ports
    • Supports 1, 2, 3, 4 data lanes per CSI-2 port
    • CSI-2 data rate scalable for 400Mbps / 800Mbps / 1.5Gbps / 1.6Gbps per data lane
    • Programmable data types
    • Four virtual channels
    • ECC and CRC generation
  • Supports single-ended coaxial including Power-over-Coax (PoC) or Shielded Twisted-Pair (STP) cable
  • Adaptive receive equalization
  • I2C with fast-mode plus up to 1Mbps
  • Flexible GPIOs for sensor synchronization and diagnostics
  • Compatible with DS90UB933-Q1/DS90UB913A-Q1 serializers
  • CRC protection on the internal data path
  • ISO 10605 and IEC 61000-4-2 ESD compliant

The DS90UB964-Q1 is a versatile sensor hub capable of connecting serialized sensor data received from four independent video data streams through an FPD-Link III interface. When coupled with DS90UB913A-Q1/933-Q1 serializers, the DS90UB964-Q1 receives data from 1-Megapixel image sensors supporting 720p/800p/960p resolution at 30Hz or 60Hz frame rates. Data is received and aggregated into a MIPI CSI-2 compliant output for interconnect to a downstream processor. A second MIPI CSI-2 output port is available to provide additional bandwidth, or offers a second replicated output for data-logging and parallel processing.

The DS90UB964-Q1 includes four FPD-Link III deserializers, each enabling a connection through cost-effective 50Ω single-ended coaxial or 100Ω differential STP cables. The receive equalizers automatically adapt to compensate for cable loss characteristics, including degradation over time.

Each of the FPD-Link III interfaces also includes a separate low latency bidirectional control channel that continuously conveys I2C, GPIOs, and other control information. General-purpose I/O signals such as those required for camera synchronization and diagnostics features also make use of this bidirectional control channel.

The DS90UB964-Q1 is AEC-Q100 qualified for automotive applications and is offered in a cost-effective and space-saving 64 pin VQFN package.

The DS90UB964-Q1 is a versatile sensor hub capable of connecting serialized sensor data received from four independent video data streams through an FPD-Link III interface. When coupled with DS90UB913A-Q1/933-Q1 serializers, the DS90UB964-Q1 receives data from 1-Megapixel image sensors supporting 720p/800p/960p resolution at 30Hz or 60Hz frame rates. Data is received and aggregated into a MIPI CSI-2 compliant output for interconnect to a downstream processor. A second MIPI CSI-2 output port is available to provide additional bandwidth, or offers a second replicated output for data-logging and parallel processing.

The DS90UB964-Q1 includes four FPD-Link III deserializers, each enabling a connection through cost-effective 50Ω single-ended coaxial or 100Ω differential STP cables. The receive equalizers automatically adapt to compensate for cable loss characteristics, including degradation over time.

Each of the FPD-Link III interfaces also includes a separate low latency bidirectional control channel that continuously conveys I2C, GPIOs, and other control information. General-purpose I/O signals such as those required for camera synchronization and diagnostics features also make use of this bidirectional control channel.

The DS90UB964-Q1 is AEC-Q100 qualified for automotive applications and is offered in a cost-effective and space-saving 64 pin VQFN package.
filter 尋找其它 FPD-Link SerDes
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
重要文件 類型 標題 格式選項 日期
* Data sheet DS90UB964-Q1 12-Bit, 100MHz FPD-Link III Quad Deserializer Hub datasheet (Rev. A) PDF | HTML 2024年 1月 12日
User guide FPD-Link Margin Analysis Program (MAP) user's guide 2019年 1月 14日
Application note Backwards Compatibility Modes for Operation With Parallel Output Deserializers (Rev. A) 2018年 4月 17日
Technical article How you can log sensor data using MIPI® CSI-2 port replication in ADAS application PDF | HTML 2016年 10月 18日
Application note I2C Communication over DS90UB913/4 FPD Link-III with BCC 2013年 4月 22日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DS90UB964-Q1EVM — FPD-Link III 攝影機集線器解串器評估模組

DS90UB964-Q1 是一款多功能攝影機集線器，可透過 FPD-Link III 介面接收並整合來自 4 組獨立視訊串流的序列化攝影機資料。與 DS90UB913A/913Q 串聯器耦合時，DS90UB964-Q1 會接收來自 1 百萬像素影像感測器的資料，支援 30Hz 或 60Hz 幀率下的 720p/800p/960p 解析度。資料接收後將整合為符合 MIPI CSI-2 標準的輸出訊號，以便與後端處理器互連。第二個 MIPI CSI-2 輸出埠可提供額外頻寬，或複製輸出相同訊號。
使用指南: PDF
TI.com 無法提供
開發板

DS90UB964-Q1EVMTDA — 具有 TDA3x 支援的 FPD-Link III 攝影機集線器解串器評估模組

DS90UB964-Q1 是一款多功能攝影機集線器，可透過 FPD-Link III 介面接收並整合來自 4 組獨立視訊串流的序列化攝影機資料。與 DS90UB913A/913Q 串聯器耦合時，DS90UB964-Q1 會接收來自 1 百萬像素影像感測器的資料，支援 30Hz 或 60Hz 幀率下的 720p/800p/960p 解析度。資料接收後將整合為符合 MIPI CSI-2 標準的輸出訊號，以便與後端處理器互連。第二個 MIPI CSI-2 輸出埠可提供額外頻寬，或複製輸出相同訊號。此款 EVM 變體配備 Samtec 連接器用於 CSI-2 輸出，可輕鬆連接至 TDA3x EVM。
使用指南: PDF
TI.com 無法提供
應用軟體及架構

ALP — Analog LaunchPad Framework Utility

Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:

  • Local and remote device access
  • (...)
支援產品和硬體

支援產品和硬體
下載
支援軟體

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:

  • Local and remote device access
  • (...)
支援產品和硬體

支援產品和硬體
下載
模擬型號

DS90UB964 IBIS Model (Rev. A)

SNLM204A.ZIP (97 KB) - IBIS Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIDA-00455 — 適用於四攝影機集線器且具有整合式 ISP 和 DVP 輸出的車用 ADAS 參考設計

TIDA-00455 攝影機集線器參考設計最多允許將四部 130 萬像素的攝影機連接至 TDA2x SoC 評估模組 (EVM)。每部攝影機透過單一同軸電纜連接至集線器。  電路板上有兩個 OmniVision OV490 ISP，負責處理視訊並以並行數位格式 (DVP) 導出視訊。   這可將四個攝影機輸入合併為兩個平行視訊埠，大幅簡化系統。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01005 — 適用於四攝影機集線器且具有 MIPI CSI-2 輸出的車用 ADAS 參考設計

此攝影機集線器參考設計可將最多四個 130 萬畫素攝影機連接至 TDA3x 系統單晶片 (SoC) 評估模組 (EVM)。每部攝影機透過單一同軸電纜連接至集線器。採用 FPD-Link III 傳輸技術，將攝影機連接至四埠解串器。解串器的輸出為 MIPI CSI-2。此設計還可連接其他類型感測器，以實現感測器融合應用。
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGC) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片