8.2.4.3 Add User Record on Already Programmed Device
as Part of Commissioning Step
Perform SWD connect and reset
device (through SWD reset or pin reset) to enter SACI
Write user record using
SACI_CMD_FLASH_PROG_CCFG_USER_REC. Command fails if user record was not already
blank
Optionally and if user record
has a CRC32 at the end the user record integrity can now be checked with
SACI_CMD_FLASH_VERIFY_CCFG_SECTOR(identity check).
Device can now be reset/rebooted
with SACI_CMD_BLDR_APP_RESET_DEVICE after which the device boots into
application and/or any configured bootloader