SPRAAV1C May   2009  – March 2020 AM3703 , AM3715 , OMAP3503 , OMAP3515 , OMAP3525 , OMAP3530

 

  1.   PCB Design Guidelines for 0.4mm Package-On-Package (PoP) Packages, Part I
    1.     Trademarks
    2. 1  Using This Guide
    3. 2  A Word of Caution
    4. 3  A Team Sport
    5. 4  Be Wary of Quotes
    6. 5  Don’t Forget Your CAD Tools
    7. 6  Metric Vs English
    8. 7  PCB Fab Limits
    9. 8  Routing and Layer Stackup
    10. 9  OMAP35x 0.4mm Pitch
    11. 10 Pad Type
    12. 11 PCB Pad Dimensions for 0.4mm BGA Package
    13. 12 Multiple BGA Packages
    14. 13 Etch Traps and Heat Sinks
    15. 14 Vias and VIP
    16. 15 Laser Blind Vias
    17. 16 Filled Vias
    18. 17 Know Your Tools
    19. 18 BeagleBoard
    20. 19 BeagleBoard Views
      1. 19.1 Top Layer – Signal - Area Underneath the OMAP35x
      2. 19.2 Layer 2 – Ground
      3. 19.3 Layer 3 – Signal
      4. 19.4 Layer 4 – Signal
      5. 19.5 Layer 5 – Power (VDD2)
      6. 19.6 Layer 6 – Signal – Bottom Copper – Bottom Component Outlines
    21. 20 OMAP35x Decoupling
    22. 21 PCB Finishes for High Density Interconnect (HDI)
    23. 22 Real World Second Opinion
    24. 23 Acknowledgments
    25. 24 References
  2.   Revision History

15 Laser Blind Vias

The BeagleBoard uses blind vias that are 6mil in diameter and are laser drilled.

Laser vias are typically drilled through reinforced FR-4 material that is 0.002” thick or less. There is standard FR-4 or laser drillable FR-4 that uses a more uniform glass weave. The laser drillable (LD) glass has a cost adder to it, but produces a smoother wall hole surface which makes filling and capping easier.

The minimum average copper plating thickness for a laser blind via hole should be specified as 0.0005” or as In accordance with IPC-6012A, class 2.