SLUUBT5C November 2018 – June 2021 BQ40Z80
This command stops the output of calibration data to the ManufacturerBlockAccess() or ManufacturerData() command. Any other MAC command sent to the gauge will also stop the output of the calibration data.
Status | Condition | Action |
---|---|---|
Activate | ManufacturerBlockAccess() OR ManufacturerData() = 1 AND 0xF080 to ManufacturerAccess() | Stop output of ADC or CC data on ManufacturerBlockAccess() or ManufacturerData() |