SMARTRFTRXEBK
SmartRF 收發器評估板
SMARTRFTRXEBK
概覽
The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.
The following transceiver evaluation modules are supported:
- CC1101EM*
- CC11xLEM*
- CC112xEM*
- CC1175EM*
- CC1200EM*
- CC2500EM
- CC2520EM
(*) all frequency variants and combinations with CC1190 also supported
The evaluation modules can be bought separately on TI Store as EMKs (evaluation module kits).
What can you do with the SmartRF TrxEB?
- Develop your radio protocol on the MSP430F5438A MCU. Refer to the code examples on the relevant transceiver’s web page.
- Evaluate the performance of the transceiver using SmartRF Studio.
- Compare results obtained with the TrxEB+EM with results from your own hardware.
- Test your RF design using known good software by connecting the radio on your board to the TrxEB. SmartRF Studio can then be used to exercise the radio.
- Test your software using known good RF hardware by connecting the MCU on your board to a transceiver EM via breakout pins on the TrxEB.
Please refer to the SmartRFTrxEB User’s Guide for the most up-to-date information about the board. The guide will describe how to install drivers, more details about the peripherals on the board and how to interface with the transceiver evaluation module.
特點
- MSP430F5438A microcontroller
- 64x128 pixels serial LCD
- 4 general purpose LEDs
- 5 push-buttons
- 256 kB serial flash
- Three-axis digital accelerometer
- Ambient Light Sensor
- Jumpers for current measurements
- Break-out pins
- Full-speed USB 2.0 interface
- SmartRF Studio Support
1 x SmartRFTrxEB 1 x Micro USB cable Documentation
Sub-1 GHz 收發器
訂購並開始開發
SMARTRFTRXEBK — SmartRF Transceiver Evaluation Board
SMARTRFTRXEBK — SmartRF Transceiver Evaluation Board
SMARTRF-STUDIO-7 — SmartRF Studio
支援產品和硬體
產品
MSP430 microcontrollers
Sub-1 GHz 收發器
Sub-1 GHz 無線 MCU
低耗電 2.4GHz 產品
其它無線產品
汽車無線連線產品
硬體開發
介面轉接器
子卡
開發套件
開發板
SMARTRF-STUDIO-7 — SmartRF Studio
產品
MSP430 microcontrollers
Sub-1 GHz 收發器
Sub-1 GHz 無線 MCU
低耗電 2.4GHz 產品
其它無線產品
汽車無線連線產品
硬體開發
介面轉接器
子卡
開發套件
開發板
文件
SmartRF Studio 7 in Cloud TI Resource Explorer
Compressed source file archive
版本資訊
SmartRF™ Studio is a Windows application that can be used to evaluate and configure Low Power RF devices from Texas Instruments. The application helps designers of RF systems to easily evaluate the radio at an early stage in the design process. It is especially useful for generation of configuration register values and commands, and for practical testing and debugging of the RF system. SmartRF Studio can be used either as a standalone application or together with applicable evaluation boards or debug probes for the RF device.
新功能
- Updated RF PHY settings for the CC13x4/CC26x4 devices
- Updated target board definitions for LP_EM_CC2674P10
- Various improvements and bug-fixes
技術文件
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| 證書 | SMARTRFTRXEBK EU Declaration of Conformity (DoC) | 2019/1/2 | ||||
| 白皮書 | Frequency hopping for long-range IoT networks | 2016/7/18 | ||||
| 使用指南 | SmartRF Transceiver Evaluation Board User’s Guide (Rev. A) | 2012/2/10 |