无线微处理器
超低功耗传感器控制器
低功耗
无线协议支持
高性能无线电
法规遵从性
MCU 外设
信息安全机制
开发工具和软件
工作温度范围
封装
SimpleLink™ CC1352P7 器件是一款多协议、多频带 Sub-1GHz 和 2.4GHz 无线微控制器 (MCU)，支持以下协议：Thread、 Zigbee 、低功耗 Bluetooth 5.2、IEEE 802.15.4g、支持 IPv6 的智能对象 (6LoWPAN)、 mioty 、 Wi-SUN 、专有系统（包括 TI 15.4-Stack（Sub-1GHz 和 2.4GHz））和通过动态多协议管理器 (DMM) 驱动程序实现的并发多协议。 CC1352P7 基于 Arm® Cortex® M4F 主处理器，针对电网基础设施、楼宇自动化、零售自动化、个人电子产品和医疗应用中的低功耗无线通信和高级传感功能进行了优化。
CC1352P7 具有由 Arm® Cortex®-M0 驱动的软件定义无线电，支持多个物理层和射频标准。 CC1352P7 支持在 287MHz 至 351MHz、359MHz 至 527MHz、861MHz 至 1054MHz、1076MHz 至 1315MHz 以及 2360MHz 至 2500MHz 频带内运行。通过动态多协议管理器 (DMM) 驱动程序，可在运行时完成 PHY 和频带切换。 CC1352P7 具有高效的内置 PA，在 2.4GHz 频带中 TX 支持 +10dBm (21mA) 和 +20dBm (101mA) 的输出功率，在 Sub-1GHz 频带中 TX 支持 +20dBm (64mA) 的输出功率。
在保持 144KB RAM 时， CC1352P7 具有 0.9µA 的低待机电流。除了 Cortex® M4F 主处理器，该器件还具有能够实现快速唤醒功能的自主式超低功耗传感器控制器 CPU。例如，传感器控制器能够在系统电流为 1µA 时进行 1Hz ADC 采样。
CC1352P7 具有低 SER（软错误率）FIT（时基故障），可延长运行寿命。SRAM 奇偶校验功能始终开启，可更大程度地降低因潜在辐射事件导致的损坏风险。许多客户对产品生命周期的要求为 10 至 15 年或者更久，为了达到这一目标，TI 制定了产品生命周期政策，对产品的寿命和供货连续性作出承诺。
CC1352P7 器件是 SimpleLink™ MCU 平台的一部分，包括 Wi-Fi®、低功耗 Bluetooth®、Thread、Zigbee、Wi-SUN®、Amazon Sidewalk、mioty®、Sub-1GHz MCU 和主机 MCU。 CC1352P7 是可扩展产品系列（闪存为 32KB 至 704KB）的一部分，具有引脚对引脚兼容的封装选项。通用 SimpleLink™ CC13xx 和 CC26xx 软件开发套件 (SDK) 及 SysConfig 系统配置工具支持产品系列中各器件之间的迁移。SDK 随附了丰富的软件栈、应用示例和 SimpleLink™ Academy 培训课程。有关更多信息，请查看无线连接。
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
此 LaunchPad 可加速开发具有集成功率放大器和多频带无线电支持（支持 Sub-1GHz 和 2.4GHz 同时运行）的器件。支持的协议包括低功耗 Bluetooth®、Sub-1GHz、Thread、Zigbee®、802.15.4 以及具有兼容 CC13x2-CC26x2 SDK 的专有射频。提供的版本具有不同的射频匹配网络和功率级别。
LAUNCHXL-CC1352P1：868/915MHz 条件下高达 20dBm，2.4GHz 条件下高达 5dBm
LAUNCHXL-CC1352P-2*：868/915MHz 条件下高达 14dBm，2.4GHz 条件下高达 20dBm
(...)
此 LaunchPad™ 开发套件可加速开发具有集成功率放大器和多频带无线电支持（支持 Sub-1GHz 和 2.4GHz 同时运行）的器件。支持的协议包括低功耗 Bluetooth®、Sub-1 GHz、Thread、Zigbee®、802.15.4 以及具有兼容 CC13xx-CC26xx SDK 的专有射频。提供的版本具有不同的射频匹配网络和功率级别。
BeaglePlay 是一款开源单板计算机，旨在简化将传感器、执行器、指示器、人机界面以及连接添加到可靠的嵌入式系统的过程。它采用功能强大的 64 位四核处理器和创新的连接选项，包括 WiFi、千兆位以太网、Sub-1GHz 无线以及具有数据线供电功能的单线对以太网。BeaglePlay 与 1,000 个现成的插件和定制的 Debian Linux 映像兼容，可轻松实现扩展和定制。它还包含用于摄像头和触摸屏显示屏的带状电缆连接以及用于电池供电型实时时钟的插座，是人机界面设计的理想选择。BeaglePlay 具有极具竞争力的价格和用户友好的设计，可为用户提供良好的开发体验。
BDE Technology, Inc. 是 TI 认证的第三方模块提供商。BDE 的模块基于 TI 的 CC1XXX 低于 1GHz 无线连接产品，使客户能够缩短开发周期、减少设计不确定性、降低产品成本并高效发布具有竞争力的产品。BDE 专门向全球 OEM、系统集成商、设备制造商和解决方案提供商提供超低功耗无线通信技术，如 Amazon Sidewalk、Wi-SUN、mioty 和无线 M-Bus。
Lauterbach TRACE32® 工具是一套先进的硬件和软件组件，开发人员可通过它分析、优化和认证 TI 的许多无线连接芯片。这套全球知名的嵌入式系统调试解决方案是所有开发阶段（从器件前开发一直到产品认证和现场故障排除）的理想解决方案： 完整的片上断点支持；运行时存储器访问；闪存编程和基准测试计数器。所有功能均可脚本化，使开发人员能够反复执行相同的测试序列。Lauterbach 工具直观的模块化设计可为工程师提供当今最高的可用性能，并提供可随需求变化而调整和扩展的系统。经认证的工具资质认证支持套件 (TQSK) 提供了一种便捷而全面的方法来鉴定 TRACE32® (...)
Amazon Sidewalk 是一个安全可靠的社区网络，它使用 Amazon Sidewalk 桥接器（例如兼容的 Amazon Echo 和 Ring 设备）覆盖家庭、楼宇、整个社区甚至整个城市的用例，为物联网设备提供云连接。Amazon Sidewalk 使用低功耗 Bluetooth® 进行短距离通信，使用 Sub-1GHz 915MHz 频率覆盖更远的距离，从而实现家庭内外的低带宽和远距离连接。Amazon Sidewalk 利用所使用的数百万个 Sidewalk (...)
十多年来，RF-star 作为 TI 无线连接模块的 3P IDH，致力于提供基于 TI 产品的各种无线模块和解决方案，例如 BLE、Matter、ZigBee、Thread、Wi-Fi、Sub-1GHz 和 Wi-SUN。
RF-TI1352B1 基于 CC1352R MCU，RF-TI1352P1 基于 CC1352P，而 RF-TI1352P2 基于 CC1352P7，它们是多协议和双频带 Sub-1GHz (800MHz - 928MHz) 和 2.4GHz 无线模块，支持 Matter（仅限 CC1352P7）、Thread、Zigbee、低功耗蓝牙 5.2、IEEE (...)
Beijing Jia An Electronics Technology Co., Ltd. 的 Cansec Wireless 品牌无线和物联网 (IoT) 模块。AN2340SA-B 模块是基于 CC2340 SimpleLink™ 32 位 Arm® Cortex®-M0+ 低功耗 Bluetooth® 无线微控制器 (MCU) 的 2.4GHz 低功耗 Bluetooth® 5.3 小尺寸物联网软件和硬件解决方案。该器件针对低功耗无线通信进行了优化，支持片上双映像无线下载 (OAD)。AN1352P7-915PUA-2.4SA 是一款基于 (...)
The SimpleLink™ Low Power SDKs support the CC13xx, CC23xx and CC26xx family of products. Together, these SDKs provide comprehensive software packages for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Mesh, Zigbee®, Matter, Thread, 802.15.4-based, (...)
The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)
The TI Arm® code generation (compiler) tools support development of applications for TI Arm-based platforms, especially those featuring TI Arm Cortex-M and Cortex-R series devices.
The current tools ARM-CGT-CLANG are derived from the open-source Clang compiler and its supporting LLVM (...)
The TI Arm® code generation (compiler) tools support development of applications for TI Arm-based platforms, especially those featuring TI Arm Cortex-M and Cortex-R series devices.
The current tools ARM-CGT-CLANG are derived from the open-source Clang compiler and its supporting LLVM (...)
Edge AI Studio is part of the CCStudio™ development tool ecosystem. Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers, connectivity devices and radar sensors. It supports both AI-accelerated (...)
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
The SimpleLink™ Low Power SDKs support the CC13xx, CC23xx and CC26xx family of products. Together, these SDKs provide comprehensive software packages for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Mesh, Zigbee®, Matter, Thread, 802.15.4-based, (...)
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
To get started with the SimpleLink™ Sub-1GHz hardware design review process:
此参考设计包含电力线通信 (PLC)，还提供无线通信功能。数字控制和通信均在单个 C2000™ 微控制器 (MCU) 中实现。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。
This is the 5.1.0.LTS Long-Term Support (LTS) release. The tiarmclang compiler tools provide software development tools including the compiler, assembler, and linker, among others, which can be used to develop applications with C/C++ source code for loading and running on Arm Cortex-M and Cortex-R series core processors.
For definitions and explanations of STS, LTS, and the versioning number scheme, please see https://software-dl.ti.com/ccs/esd/documents/sdto_cgt_compiler_version_numbers_and_what_they_mean.html.
PLEASE NOTE: The MacOS installation of the tiarmclang 5.1.0.LTS relies on a libc++.1.dylib that is available in more recent versions of the MacOS. It is known to work with MacOS version 13.6, but it does not work with MacOS version 10.13.6.
SmartRF Studio 7 in Cloud TI Resource Explorer
Compressed source file archive
SmartRF™ Studio is a Windows application that can be used to evaluate and configure Low Power RF devices from Texas Instruments. The application helps designers of RF systems to easily evaluate the radio at an early stage in the design process. It is especially useful for generation of configuration register values and commands, and for practical testing and debugging of the RF system. SmartRF Studio can be used either as a standalone application or together with applicable evaluation boards or debug probes for the RF device.
Edge AI Studio is part of the CCStudio™ development tool ecosystem. Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers, connectivity devices and radar sensors. It supports both AI-accelerated devices such as processors featuring a C7™ NPU or microcontrollers featuring a TinyEngine™ as well as AI-supported devices without a dedicated accelerator.
The Edge AI Studio graphical user interface provides a fully integrated solution for data management, model training and deployment on a live development platform. Select from a variety of optimized pre-trained models in the TI Model Zoo and optionally re-train them with custom data (BYOD) to improve accuracy and performance.
Features
Linux Installer for ARM CGT
Windows Installer for ARM CGT
MacOS Installer for ARM CGT
This is a long-term support release of the ARM Code Generation Tools (CGT) containing new enhancements and features. The ARM CGT provides software development tools including the compiler, assembler, and linker, among others, which can be used to develop applications with C/C++ source code for loading and running on ARM core processors.
The SimpleLink™ Low Power F2 Software Development Kit (SDK), formerly known as the CC13xx and CC26xx SDK, delivers components that enable engineers to develop applications on the Texas Instruments SimpleLink CC13xx and CC26xx family of wireless microcontrollers (MCUs). This software toolkit provides a cohesive and consistent software experience for all SimpleLink CC13xx and CC26xx wireless MCU users by packaging essential software components, such as a Bluetooth® Low Energy (LE) protocol stack supporting Bluetooth 5.2, Zigbee 3.0 compliant protocol suite, RF-Proprietary examples, TI 15.4 Stack, TI Wi-SUN FAN Stack, Amazon Sidewalk examples, as well as the TI-RTOS7 and FreeRTOS kernels and TI Drivers in one easy-to-use software package along with example applications and documentation. In addition, the Dynamic Multi-Protocol Manager (DMM) software component enables multiprotocol development on a single SimpleLink wireless MCU.
The SimpleLink MCU portfolio offers a single development environment that delivers flexible hardware, software, and tool options for customers developing wired and wireless applications. With 100 percent code reuse across host MCUs, Wi-Fi™, Bluetooth Low Energy, Sub-1GHz devices and more, choose the MCU or connectivity standard that fits your design. A one-time investment with the SimpleLink software development kit allows you to reuse often, opening the door to create unlimited applications. For more information, visit www.ti.com/simplelink.
This is version 8.32.00.07 of the SimpleLink Low Power F2 SDK. This SDK is also available on GitHub at https://github.com/TexasInstruments/simplelink-lowpower-f2-sdk .
The SimpleLink™ Edge AI Plugin is a companion software package that enables advanced artificial intelligence functionality on various SimpleLink™ wireless microcontroller (MCU) platforms. This software toolkit provides a cohesive and consistent software experience for all SimpleLink™ MCU users by packaging the necessary add-on software components to develop edge Machine Learning (ML) and AI applications, such as smart signal feature extraction, sensor acquisition drivers and device agent protocols to interact with CCStudio™ Edge AI Studio. The plug in also comes with the necessary examples that contain ML artifacts that can be deployed for specific applications and documentation.
Note: The previous release version (9.12.00.00) has been deprecated, and the content has been added into this current release.
SmartRF Packet Sniffer 2 includes software and firmware to capture and display over-the-air packets. The capture device is connected to the PC via USB. SmartRF Packet Sniffer 2 supports the CC13xx and CC26xx family of devices as capture device and uses Wireshark for packet display and filtering.
Please note that device revision C (1.1) of CC13x2/CC26x2 is no longer supported. Download SmartRF Packet Sniffer 2 v1.6.0 if you use CC13x2/CC26x2 device revision C (1.1).
Hardware Design Review Request Form for SimpleLink Sub-1GHz Devices
UniFlash is a standalone tool used to program on-chip and external flash memory on TI MCUs and on-board flash memory for Sitara processors. UniFlash has a GUI, command line, and scripting interface. UniFlash is available free of charge.
None
Initial release of the SimpleLink CC13xx CC26xx Academy
Installer executable
Compressed archive
HTML document
Compressed source file archive
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, allowing for ultra-low power application design.
The tool generates a Sensor Controller Interface driver, which is a set of C source files to be compiled into the System CPU (ARM Cortex-M3/M4) application. These source files contain the Sensor Controller firmware image and associated definitions, and generic functions that allow the System CPU application to control the Sensor Controller and exchange data.
The Sensor Controller is a small CPU core that is highly optimized for low power consumption and efficient peripheral operation. The Sensor Controller is located in the CC26xx/CC13xx auxiliary (AUX) power/clock domain, and can perform simple background tasks autonomously and independently of the System CPU and the MCU domain power state. Such tasks include but are not limited to:
The Sensor Controller is user programmable, using a simple programming language with syntax similar to C. This allows for sensor polling and other tasks to be specified as sequential algorithms, rather than static configuration of complex peripheral modules, timers, DMA, register programmable state machines, event routing and so on. The main advantages are:
TI 15.4-Stack is an IEEE 802.15.4-based software stack part of the SimpleLink Low Power F2 SDK that supports a Star network topology for wireless applications. TI 15.4-Stack provides a complete end-to-end wireless application development solution to reduce time and cost of getting your product to market.
The SysConfig tool is used configure TI software and hardware. For software configuration, SysConfig is used in conjunction with a TI SDK. For PinMux configuration, the tool may be used standalone.