ZHCSHO9P July   2006  – February 2018 TLK2711-SP

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     外部组件互连
  4. 4 修订历史记录
  5. 5 说明 （续）
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 TTL Input Electrical Characteristics
    6. 7.6 Transmitter/Receiver Electrical Characteristics
    7. 7.7 Reference Clock (TXCLK) Timing Requirements
    8. 7.8 TTL Output Switching Characteristics
    9. 7.9 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Transmit Interface
      2. 8.3.2  Transmit Data Bus
      3. 8.3.3  Data Transmission Latency
      4. 8.3.4  8-Bit/10-Bit Encoder
      5. 8.3.5  Pseudo-Random Bit Stream (PRBS) Generator
      6. 8.3.6  Parallel to Serial
      7. 8.3.7  High-Speed Data Output
      8. 8.3.8  Receive Interface
      9. 8.3.9  Receive Data Bus
      10. 8.3.10 Data Reception Latency
      11. 8.3.11 Serial to Parallel
      12. 8.3.12 Comma Detect and 8-Bit/10-Bit Decoding
      13. 8.3.13 LOS Detection
      14. 8.3.14 PRBS Verification
      15. 8.3.15 Reference Clock Input
      16. 8.3.16 Operating Frequency Range
      17. 8.3.17 Testability
      18. 8.3.18 Loopback Testing
      19. 8.3.19 BIST
      20. 8.3.20 Power-On Reset
    4. 8.4 Device Functional Modes
      1. 8.4.1 Power-Down Mode
      2. 8.4.2 High-Speed I/O Directly-Coupled Mode
      3. 8.4.3 High-Speed I/O AC-Coupled Mode
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 接收文档更新通知
    2. 12.2 社区资源
    3. 12.3 商标
    4. 12.4 静电放电警告
    5. 12.5 Glossary
  13. 13机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.3.1 Transmit Interface

The transmitter interface registers valid incoming 16-bit-wide data (TXD0 to TXD15) on the rising edge of the TXCLK. The data is then 8-bit/10-bit encoded, serialized, and transmitted sequentially over the differential high-speed I/O channel. The clock multiplier multiplies the reference clock (TXCLK) by a factor of 10×, creating a bit clock. This internal bit clock is fed to the parallel-to-serial shift register, which transmits data on both the rising and falling edges of the bit clock, providing a serial data rate that is 20× the reference clock. Data is transmitted least significant bit (LSB) (TXD0) first.