SLWU079D March   2012  – April 2016

 

  1.   TSW140x High Speed Data Capture/Pattern Generator Card
    1.     Trademarks
    2. 1 Functionality
      1. 1.1 ADC EVM Data Capture
      2. 1.2 DAC EVM Pattern Generator
    3. 2 Hardware Configuration
      1. 2.1 Power Connections
        1. 2.1.1 Output Power Regulators
      2. 2.2 Switches, Jumpers and Fuses
        1. 2.2.1 Switches and Pushbuttons
        2. 2.2.2 Jumpers
        3. 2.2.3 Fuses
      3. 2.3 LEDs
      4. 2.4 Connectors
        1. 2.4.1 Input LVDS ADC Interface Connector
        2. 2.4.2 JTAG Connector
        3. 2.4.3 Input CMOS ADC Interface Connector
        4. 2.4.4 Output LVDS Connector
        5. 2.4.5 Output CMOS DAC Interface Connector
        6. 2.4.6 USB I/O Connection
    4. 3 Software Start up
      1. 3.1 Installation Instructions
      2. 3.2 USB Interface and Drivers
      3. 3.3 Device ini Files
    5. 4 ADC Data Capture Software Operation
      1. 4.1 Testing a TSW1400 EVM with an ADS5281 EVM
      2. 4.2 Testing a TSW1400EVM with an ADS62P49EVM (CMOS Interface)
    6. 5 TSW1400 Pattern Generator Operation
      1. 5.1 Testing a TSW1400 EVM with a DAC3152 EVM
      2. 5.2 Loading DAC Firmware
      3. 5.3 Configuring TSW1400 for Pattern Generation
      4. 5.4 Testing a TSW1400 EVM with a DAC5688EVM (CMOS Interface)
    7. 6 TSW1405 Functional Description
      1. 6.1 Hardware Description
        1. 6.1.1 Power Connections
        2. 6.1.2 Pushbuttons
        3. 6.1.3 Jumpers
        4. 6.1.4 LEDs
      2. 6.2 Software Operation
        1. 6.2.1 Channel Selection
    8. 7 TSW1406 Functional Description
      1. 7.1 Hardware Description
        1. 7.1.1 Power Connections
        2. 7.1.2 Pushbuttons
        3. 7.1.3 Jumpers
        4. 7.1.4 LEDs
      2. 7.2 Software Operation
    9. 8 Revision History

6.1.4 LEDs

The TSW1405 has an LED labeled D1 Done that is lit when the FPGA is finished loading a bit file and is ready for use. An additional LED labeled D2 is normally not installed and is reserved for future use. For the initial release of the TSW1405, the LED D2 (if installed) will flash when an LVDS clock is present from the ADC EVM.