ZHCSRK4A April   2020  – September 2020 CC2640R2L

PRODUCTION DATA  

  1. 特性
  2. 应用
  3. 说明
  4. Functional Block Diagram
  5. Revision History
  6. Device Comparison
    1. 6.1 Related Products
  7. Terminal Configuration and Functions
    1. 7.1 Pin Diagram – RGZ Package
    2. 7.2 Signal Descriptions – RGZ Package
    3. 7.3 Pin Diagram – RHB Package
    4. 7.4 Signal Descriptions – RHB Package
  8. Specifications
    1. 8.1  Absolute Maximum Ratings
    2. 8.2  ESD Ratings
    3. 8.3  Recommended Operating Conditions
    4. 8.4  Power Consumption Summary
    5. 8.5  General Characteristics
    6. 8.6  125-kbps Coded (Bluetooth 5) – RX
    7. 8.7  125-kbps Coded (Bluetooth 5) – TX
    8. 8.8  500-kbps Coded (Bluetooth 5) – RX
    9. 8.9  500-kbps Coded (Bluetooth 5) – TX
    10. 8.10 1-Mbps GFSK (Bluetooth low energy) – RX
    11. 8.11 1-Mbps GFSK (Bluetooth low energy) – TX
    12. 8.12 2-Mbps GFSK (Bluetooth 5) – RX
    13. 8.13 2-Mbps GFSK (Bluetooth 5) – TX
    14. 8.14 24-MHz Crystal Oscillator (XOSC_HF)
    15. 8.15 32.768-kHz Crystal Oscillator (XOSC_LF)
    16. 8.16 48-MHz RC Oscillator (RCOSC_HF)
    17. 8.17 32-kHz RC Oscillator (RCOSC_LF)
    18. 8.18 ADC Characteristics
    19. 8.19 Temperature Sensor
    20. 8.20 Battery Monitor
    21. 8.21 Synchronous Serial Interface (SSI)
    22. 8.22 DC Characteristics
    23. 8.23 Thermal Resistance Characteristics
    24. 8.24 Timing Requirements
    25. 8.25 Switching Characteristics
    26. 8.26 Typical Characteristics
  9. Detailed Description
    1. 9.1  Overview
    2. 9.2  Functional Block Diagram
    3. 9.3  Main CPU
    4. 9.4  RF Core
    5. 9.5  Memory
    6. 9.6  Debug
    7. 9.7  Power Management
    8. 9.8  Clock Systems
    9. 9.9  General Peripherals and Modules
    10. 9.10 Voltage Supply Domains
    11. 9.11 System Architecture
  10. 10Application, Implementation, and Layout
    1. 10.1 Application Information
    2. 10.2 5 × 5 External Differential (5XD) Application Circuit
      1. 10.2.1 Layout
  11. 11Device and Documentation Support
    1. 11.1  Device Nomenclature
    2. 11.2  Tools and Software
    3. 11.3  Documentation Support
    4. 11.4  支持资源
    5. 11.5  Texas Instruments Low-Power RF Website
    6. 11.6  Low-Power RF eNewsletter
    7. 11.7  Trademarks
    8. 11.8  静电放电警告
    9. 11.9  Export Control Notice
    10. 11.10 术语表
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

125-kbps Coded (Bluetooth 5) – RX

Measured on the TI CC2650EM-5XD reference design with Tc = 25°C, VDDS = 3.0 V, fRF = 2440 MHz, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Receiver sensitivity Differential mode. Measured at the CC2650EM-5XD SMA connector, BER = 10–3 –103 dBm
Receiver saturation Differential mode. Measured at the CC2650EM-5XD SMA connector, BER = 10–3 >5 dBm
Frequency error tolerance Difference between the incoming carrier frequency and the internally generated carrier frequency –260 310 kHz
Data rate error tolerance Difference between incoming data rate and the internally generated data rate (37-byte packets) –260 260 ppm
Data rate error tolerance Difference between incoming data rate and the internally generated data rate (255-byte packets) –140 140 ppm
Co-channel rejection (1) Wanted signal at –79 dBm, modulated interferer in channel, BER = 10–3 –3 dB
Selectivity, ±1 MHz (1) Wanted signal at –79 dBm, modulated interferer at ±1 MHz, BER = 10–3 9 / 5(2) dB
Selectivity, ±2 MHz (1) Wanted signal at –79 dBm, modulated interferer at ±2 MHz, Image frequency is at –2 MHz, BER = 10–3 43 / 32(2) dB
Selectivity, ±3 MHz (1) Wanted signal at –79 dBm, modulated interferer at ±3 MHz, BER = 10–3 47 / 42(2) dB
Selectivity, ±4 MHz (1) Wanted signal at –79 dBm, modulated interferer at ±4 MHz, BER = 10–3 46 / 47(2) dB
Selectivity, ±6 MHz (1) Wanted signal at –79 dBm, modulated interferer at ±6 MHz, BER = 10–3 49 / 46(2) dB
Alternate channel rejection, ±7 MHz(1) Wanted signal at –79 dBm, modulated interferer at ≥ ±7 MHz, BER = 10–3 50 / 47(2) dB
Selectivity, image frequency(1) Wanted signal at –79 dBm, modulated interferer at image frequency, BER = 10–3 32 dB
Selectivity, image frequency
±1 MHz(1)
Note that Image frequency + 1 MHz is the Co-channel –1 MHz. Wanted signal at –79 dBm, modulated interferer at ±1 MHz from image frequency, BER = 10–3 5 / 32(2) dB
Blocker rejection, ±8 MHz and above(1) Wanted signal at –79 dBm, modulated interferer at ±8 MHz and above, BER = 10–3 >46 dB
Out-of-band blocking (3) 30 MHz to 2000 MHz –40 dBm
Out-of-band blocking 2003 MHz to 2399 MHz –19 dBm
Out-of-band blocking 2484 MHz to 2997 MHz –22 dBm
Intermodulation Wanted signal at 2402 MHz, –76 dBm. Two interferers at 2405 and 2408 MHz respectively, at the given power level –42 dBm
Numbers given as I/C dB.
X / Y, where X is +N MHz and Y is –N MHz.
Excluding one exception at Fwanted / 2, per Bluetooth Specification.