SLAA419C October   2009  – April 2019 MSP430F5418 , MSP430F5418A , MSP430F5419 , MSP430F5419A , MSP430F5435 , MSP430F5435A , MSP430F5436 , MSP430F5436A , MSP430F5437 , MSP430F5437A , MSP430F5438 , MSP430F5438A

 

  1.   Migrating From MSP430F541x and MSP430F543x MCUs to MSP430F541xA and MSP430F543xA MCUs
    1.     Trademarks
    2. 1 Device Comparison
    3. 2 Hardware Considerations
      1. 2.1 PMM Settings and Low Power Consumption
      2. 2.2 Operating Frequency vs Supply Voltage
      3. 2.3 Internal Voltage Reference
      4. 2.4 Unified Clock System (UCS) Settings
      5. 2.5 Cyclic Redundancy Check Module
      6. 2.6 Device Errata
    4. 3 Firmware Considerations
      1. 3.1 PMM Default States
        1. 3.1.1 PMM Defaults for F543x
          1. 3.1.1.1 Power Management Module Control Register 0 (PMMCTL0)
          2. 3.1.1.2 Supply Voltage Supervisor and Monitor High-Side Control Register (SVSMHCTL)
          3. 3.1.1.3 Supply Voltage Supervisor and Monitor Low-Side Control Register (SVSMLCTL)
          4. 3.1.1.4 Power Management Module Reset and Interrupt Enable Register (PMMRIE)
        2. 3.1.2 PMM Defaults for F543xA
      2. 3.2 Internal Voltage Reference
        1. 3.2.1 ADC12 Temperature Sensor Equation
      3. 3.3 Bootloader (BSL)
    5. 4 References
  2.   Revision History

3.3 Bootloader (BSL)

The SYS4 erratum, fixed in the A revisions, states that the BSL is non-programmable. Read disturb issues when executing code from non-Main memory segments of Flash were worked around in the current BSL using carefully aligned instructions, forcing it to be locked from user edit. These read disturb issues do not affect A revisions of silicon; therefore, the peripheral interface to the BSL is now user-programmable. See the MSP430™ Flash Devices Bootloader (BSL) User's Guide for further information concerning how to program the peripheral interface of the BSL.