ZHCSDZ0B July   2015  – January 2022 TUSB4020BI-Q1

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 说明（续）
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings (1)
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 3.3-V I/O Electrical Characteristics
    6. 7.6 Hub Input Supply Current
    7. 7.7 Power-Up Timing Requirements
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Battery Charging Features
      2. 8.3.2 USB Power Management
      3. 8.3.3 Clock Generation
      4. 8.3.4 Power-Up and Reset
    4. 8.4 Device Functional Modes
      1. 8.4.1 External Configuration Interface
    5. 8.5 Programming
      1. 8.5.1 One-Time Programmable (OTP) Configuration
      2. 8.5.2 I2C EEPROM Operation
      3. 8.5.3 SMBus Slave Operation
    6. 8.6 Register Maps
      1. 8.6.1 Configuration Registers
        1. 8.6.1.1  ROM Signature Register (offset = 0h) [reset = 0h]
        2. 8.6.1.2  Vendor ID LSB Register (offset = 1h) [reset = 51h]
        3. 8.6.1.3  Vendor ID MSB Register (offset = 2h) [reset = 4h]
        4. 8.6.1.4  Product ID LSB Register (offset = 3h) [reset = 25h]
        5. 8.6.1.5  Product ID MSB Register (offset = 4h) [reset = 80h]
        6. 8.6.1.6  Device Configuration Register (offset = 5h) [reset = 1Xh]
        7. 8.6.1.7  Battery Charging Support Register (offset = 6h) [reset = 0Xh]
        8. 8.6.1.8  Device Removable Configuration Register (offset = 7h) [reset = 0Xh]
        9. 8.6.1.9  Port Used Configuration Register (offset = 8h) [reset = 0h]
        10. 8.6.1.10 PHY Custom Configuration Register (offset = 9h) [reset = 0h]
        11. 8.6.1.11 Device Configuration Register 2 (offset = Ah)
        12. 8.6.1.12 UUID Registers (offset = 10h to 1Fh)
        13. 8.6.1.13 Language ID LSB Register (offset = 20h)
        14. 8.6.1.14 Language ID MSB Register (offset = 21h)
        15. 8.6.1.15 Serial Number String Length Register (offset = 22h)
        16. 8.6.1.16 Manufacturer String Length Register (offset = 23h)
        17. 8.6.1.17 Product String Length Register (offset = 24h)
        18. 8.6.1.18 Serial Number Registers (offset = 30h to 4Fh)
        19. 8.6.1.19 Manufacturer String Registers (offset = 50h to 8Fh)
        20. 8.6.1.20 Product String Registers (offset = 90h to CFh)
        21. 8.6.1.21 Additional Feature Configuration Register (offset = F0h)
        22. 8.6.1.22 Charging Port Control Register (offset = F2h)
        23. 8.6.1.23 Device Status and Command Register (offset = F8h)
  9. 9 Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 Crystal Requirements
      2. 9.1.2 Input Clock Requirements
    2. 9.2 Typical Applications
      1. 9.2.1 Upstream Port Implementation
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
        3. 9.2.1.3 Application Curves
      2. 9.2.2 Downstream Port 1 Implementation
      3. 9.2.3 Downstream Port 2 Implementation
      4. 9.2.4 VBUS Power Switch Implementation
      5. 9.2.5 Clock, Reset, and Miscellaneous
      6. 9.2.6 Power Implementation
  10. 10Power Supply Recommendations
    1. 10.1 Power Supply
    2. 10.2 Downstream Port Power
    3. 10.3 Ground
  11. 11Layout
    1. 11.1 Layout Guidelines
      1. 11.1.1 Placement
      2. 11.1.2 Package Specific
      3. 11.1.3 Differential Pairs
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 接收文档更新通知
    2. 12.2 支持资源
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 术语表
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.3.1 Battery Charging Features

The TUSB4020BI-Q1 provides support for battery charging. Battery charging support may be enabled on a per port basis through the REG_6h(batEn[1:0]).

Battery charging support includes both charging downstream port (CDP) and dedicated charging port (DCP) modes. The DCP mode is compliant with the Chinese Telecommunications Industry Standard YD/T 1591-2009.

In addition to standard DCP mode, the TUSB4020BI-Q1 provides a mode (AUTOMODE) which automatically provides support for DCP devices and devices that support custom charging indication. AUTOMODE is disabled by default. When in AUTOMODE, the port automatically switches between a divider mode and the DCP mode depending on the portable device connected. The divider mode places a fixed DC voltage on the ports DP and DM signals which allows some devices to identify the capabilities of the charger. The default divider mode indicates support for up to 5 W. The divider mode can be configured to report a high-current setting (up to 10 W) through REG_Ah(HiCurAcpModeEn). When AUTOMODE is enabled through REG_Ah(autoModeEnz), the CDP mode is not functional. CDP mode can not be used when AUTOMODE is enabled.

The battery charging mode for each port depends on the state of Reg_6h(batEn[n]), the status of the VBUS input, and the state of REG_Ah(autoModeEnz) upstream port, as identified in Table 8-1. Battery charging can also be enabled through the PWRCTL1/BATEN1 and PWRCTL2/BATEN2 pins.

Table 8-1 TUSB4020BI-Q1 Battery Charging Modes
batEn[n]VBUSautoModeEnzBC Mode Port x
(x = n + 1)
0Do not careDo not careDo not care
1<4 V0Automode(3) (4)
1DCP(1) (2)
>4 V1CDP(1)
(1) USB device is USB Battery Charging Specification Revision 1.2 Compliant
(2) USB device is Chinese Telecommunications Industry Standard YD/T 1591-2009
(3) Auto-mode automatically selects divider-mode or DCP mode.
(4) Divider mode can be configured for high-current mode through register or OTP settings.