ISO1640
- Robust Isolated Bidirectional, I2C
Compatible, Communication
- ISO1640: Bidirectional SDA and SCL communication
- ISO1641: Bidirectional SDA and unidirectional SCL communication
- ISO1642/3/4: Bidirectional SDA and SCL communication with either 2 or 3 unidirectional GPIO channels
- Hot-Swappable SDA and SCL
- Bidirectional data transfer up to 1.7 MHz Operation
- Up to 3 additional unidirectional isolated GPIO channels supporting 50 Mbps speed
- Robust isolation barrier with enhanced EMC:
- >100-year projected lifetime at 450 VRMS working voltage (D-8) and 1500 VRMS working voltage (DW-16)
- Up to 5000 VRMS isolation rating per UL1577
- Up to 10 kV reinforced surge capability
- ±100 kV/µs typical CMTI
- ±8 kV IEC-ESD 61000-4-2 contact discharge protection across isolation barrier
- Same side ±8 kV IEC-ESD unpowered contact discharge on SCL2 and SDA2 (Side 2)
- Supply range: 3 V to 5.5 V (Side 1) and 2.25 V to 5.5 V (Side 2)
- Open-drain outputs with 3.5-mA (Side 1) and 50-mA (Side 2) current-sink capability
- Max capacitive load: 80 pF (Side 1) and 400 pF (Side 2)
- 16-SOIC (DW-16) and 8-SOIC (D-8) Package Options
- –40°C to +125°C Operating Temperature
- Safety-Related Certifications (planned):
- UL 1577 Component Recognition Program
- DIN VDE V 0884-11
- IEC 62368-1, IEC 61010-1, IEC 60601-1 and GB4943.1-2011 certifications
The ISO1640, ISO1641, ISO1642, ISO1643 and ISO1644 (ISO164x) device s are hot swappable, low-power, bidirectional isolator s that are compatible with I2C interfaces. The ISO164x supports UL 1577 isolation ratings of 5000 VRMS in the 16-DW package, and 3000 VRMS in the 8-D package. Each I2C isolation channel in this low emissions device has a logic input and open drain output separated by a double capacitive silicon dioxide (SiO2) insulation barrier. The ISO1642 and ISO1643 intregrates 2 unidirectional CMOS isolation channels, while the ISO1644 intregrates 3 unidirectional CMOS isolation channels which can be used for static GPIO isolation or to isolate a Serial Peripheral Interface (SPI) bus. This family includes basic and reinforced insulation devices certified by VDE, UL, CSA, TUV and CQC. The ISO1640/2/3/4 have two isolated bidirectional channels for clock and data lines and the ISO1641 has a bidirectional data and a unidirectional clock channel. The ISO164x family integrates logic required to support bidirectional channels, providing a much simpler design and smaller footprint when compared to optocoupler-based solutions.
技术文档
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
ISO1640EVM — ISO1640 和 ISO1641 稳健 EMC 双向 I2C 数字隔离器评估模块
PMP23365 — 具有外部热插拔和遥测功能的 24V、3A、8 级 PoE PD 参考设计
此参考设计实现了具有 24V、3A 输出的以太网供电 (PoE) 供电设备 (PD) 有源钳位正激式转换器。TPS23730 PD 具有集成的脉宽调制器 (PWM) 控制器，不仅为 PoE PD 提供必要的功能，还为有源钳位正激式转换器提供 PWM 控制。此设计使用具有光耦合器反馈的次级侧调节 (SSR)。并添加了外部热插拔来支持 7 级和 8 级 PD 应用。INA237 在初级侧用于监控直流/直流输入电压和电流，功率信息通过 I2C 隔离器或基于光耦合器的电路发送到次级侧。
PMP23366 — 具有平稳过渡和遥测功能的双输入冗余 PoE 6 级 PD 参考设计
此设计采用以太网供电 (PoE) 6 级供电设备 (PD) 并具有双冗余 PoE 输入，可以在这两个输入与辅助输入之间平稳过渡。此设计使用两个 TPS2372-3 PD 控制器来进行高达 51W 的高功率 PoE 控制。通过 TPS23734 IC 的 PWM 部分，可实现 5V/9A 有源钳位正向转换器。INA237A 通过 I2C 提供输入电压/电流/功率/温度测量。
TIDA-010247 — 面向 48V 至 1500V 储能系统的高精度电池管理单元参考设计
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| SOIC (DW) | 16 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。