7 Parameter Measurement Information

Figure 7-1 Power-On Timing Requirements

Figure 7-2 TMDS Main Link Test Circuit

Figure 7-3 Input or Output Timing Measurements

Figure 7-4 Output Differential Waveform

Figure 7-5 Output Differential Waveform with De-Emphasis

(1) The FR4 trace between TTP1 and TTP2 is designed to emulate 1-12” of FR4, AC-coupling capacitor, connector and another 2” of FR4. Trace width – 4 mils. 100 Ω differential impedance.

(2) All Jitter is measured at a BER of 10⁹.

(3) Residual jitter reflects the total jitter measured at TTP4 minus the jitter measured at TTP

(4) AVCC = 3.3 V.

(5) R_T = 50 Ω.

(6) For HDMI 1.4 or 2.0, the input signal from parallel Bert does not have any pre-emphasis or de-emphasis. Refer to Recommended Operating Conditions.

Figure 7-6 HDMI Output Jitter Measurement

Figure 7-7 HPD Logic Shutdown and Propagation Timing

Figure 7-8 HPD Logic Standby and Propagation Timing

Figure 7-9 I²C SCL and SDA Timing

Figure 7-10 V_ID(DC) and V_ID(EYE)