SLVSNH6 November   2026 DP83TC1104-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
    1. 5.1 Pin Power Domain
    2. 5.2 Pin States
    3. 5.3 Pin Multiplexing
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Timing Diagrams
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 MAC Security Features
      2. 7.3.2 IEEE802.1AS Features
        1. 7.3.2.1 PTP Clock Configuration
          1. 7.3.2.1.1 PTP Reference Clock
          2. 7.3.2.1.2 PTP Synchronized Clock (Wall Clock)
            1. 7.3.2.1.2.1 PTP Time Read or Write
            2. 7.3.2.1.2.2 PTP Clock Initialization
            3. 7.3.2.1.2.3 PTP Clock Adjustment
            4. 7.3.2.1.2.4 PTP Clock Output
              1. 7.3.2.1.2.4.1 One Pulse Per Second (PPS) Output
          3. 7.3.2.1.3 PTP Time Registers
        2. 7.3.2.2 Packet Timestamps
          1. 7.3.2.2.1 Transmit (Egress) Packet Parser and Timestamp
          2. 7.3.2.2.2 Receive (Ingress) Packet Parser and Timestamp
          3. 7.3.2.2.3 PTP Transmit and Receive Timestamp Registers
        3. 7.3.2.3 Event Triggering and Timestamping
          1. 7.3.2.3.1 Event Triggering (Output)
            1. 7.3.2.3.1.1 Trigger Initialization
          2. 7.3.2.3.2 Event Timestamp (Input)
            1. 7.3.2.3.2.1 Timestamp Storage and Reading
          3. 7.3.2.3.3 Event Capture and Output Trigger Registers
        4. 7.3.2.4 PTP Interrupts
        5. 7.3.2.5 PTP I/O Configuration
      3. 7.3.3 TC10 Sleep Wake-up
        1. 7.3.3.1 Functions of the PHY for TC10 Support
          1. 7.3.3.1.1 Transition from Sleep to Wake-up Mode
            1. 7.3.3.1.1.1 Local Wake Detection
            2. 7.3.3.1.1.2 WUP Transmission and Reception
          2. 7.3.3.1.2 Wake Forwarding
          3. 7.3.3.1.3 Transition to Sleep - Sleep Negotiation
            1. 7.3.3.1.3.1 Sleep Ack
            2. 7.3.3.1.3.2 Sleep Request
            3. 7.3.3.1.3.3 Sleep Silent
            4. 7.3.3.1.3.4 Sleep Fail
            5. 7.3.3.1.3.5 Sleep
            6. 7.3.3.1.3.6 Force Sleep
        2. 7.3.3.2 Power Supply Networks for Sleep Applications
        3. 7.3.3.3 Configuration for Non-TC10 Applications
          1. 7.3.3.3.1 Hardware Configuration
          2. 7.3.3.3.2 Software Configuration
        4. 7.3.3.4 Miscellaneous Sleep Features
          1. 7.3.3.4.1 WUR Initiation Through WAKE Pin
          2. 7.3.3.4.2 Programmable Wake-Forward Pulse Duration
        5. 7.3.3.5 Fast Wake-up
          1. 7.3.3.5.1 Procedure To Program The Memory:
      4. 7.3.4 PPM Monitor
        1. 7.3.4.1 Configuring Interrupt for PPM Monitor Unlock
      5. 7.3.5 Clock Dithering
        1. 7.3.5.1 Impact of Dithering MAC Interface:
      6. 7.3.6 Diagnostic Toolkit
        1. 7.3.6.1 Signal Quality Indicator
        2. 7.3.6.2 Electrostatic Discharge Sensing
        3. 7.3.6.3 Time Domain Reflectometry
        4. 7.3.6.4 BIST and Loopback Modes
          1. 7.3.6.4.1 Data Generator and Checker
          2. 7.3.6.4.2 xMII Loopback
            1. 7.3.6.4.2.1 Enable Loopback
            2. 7.3.6.4.2.2 Enable Data Generator/Checker for MAC Side
            3. 7.3.6.4.2.3 Check Incoming Data From MAC Side
            4. 7.3.6.4.2.4 Enable Data Generator/Checker for Cable Side
            5. 7.3.6.4.2.5 Check Data for Cable Side
            6. 7.3.6.4.2.6 Other System Requirements
          3. 7.3.6.4.3 PCS Loopback
            1. 7.3.6.4.3.1 Enable Loopback
            2. 7.3.6.4.3.2 Enable Data Generator/Checker for MAC Side
            3. 7.3.6.4.3.3 Check Incoming Data From MAC Side
            4. 7.3.6.4.3.4 Enable Data Generator/Checker for Cable Side
            5. 7.3.6.4.3.5 Check Data for Cable Side
            6. 7.3.6.4.3.6 Other System Requirements
          4. 7.3.6.4.4 Digital Loopback
            1. 7.3.6.4.4.1 Enable Loopback
            2. 7.3.6.4.4.2 Enable Data Generator/Checker for MAC Side
            3. 7.3.6.4.4.3 Check Incoming Data From MAC Side
            4. 7.3.6.4.4.4 Enable Data Generator/Checker for Cable Side
            5. 7.3.6.4.4.5 Check Data for Cable Side
            6. 7.3.6.4.4.6 Other System Requirements
          5. 7.3.6.4.5 Analog Loopback
            1. 7.3.6.4.5.1 Enable Loopback
            2. 7.3.6.4.5.2 Enable Data Generator/Checker for MAC Side
            3. 7.3.6.4.5.3 Check Incoming Data From MAC Side
            4. 7.3.6.4.5.4 Enable Data Generator/Checker for Cable Side
            5. 7.3.6.4.5.5 Check Data for Cable Side
            6. 7.3.6.4.5.6 Other System Requirements
          6. 7.3.6.4.6 Reverse Loopback
            1. 7.3.6.4.6.1 Enable Loopback
            2. 7.3.6.4.6.2 Enable Data Generator/Checker for MAC Side
            3. 7.3.6.4.6.3 Check Incoming Data From MAC Side
            4. 7.3.6.4.6.4 Enable Data Generator/Checker for Cable Side
            5. 7.3.6.4.6.5 Check Data for Cable Side
            6. 7.3.6.4.6.6 Other System Requirements
      7. 7.3.7 Compliance Test Modes
        1. 7.3.7.1 Test Mode 1
        2. 7.3.7.2 Test Mode 2
        3. 7.3.7.3 Test Mode 4
        4. 7.3.7.4 Test Mode 5
    4. 7.4 Device Functional Modes
      1. 7.4.1 Power Modes
        1. 7.4.1.1 Power Down
        2. 7.4.1.2 Reset
        3. 7.4.1.3 Standby
        4. 7.4.1.4 Normal
        5. 7.4.1.5 Sleep
      2. 7.4.2 Media Dependent Interface
        1. 7.4.2.1 100BASE-T1 Leader and 100BASE-T1 Follower Configuration
        2. 7.4.2.2 Auto-Polarity Detection and Correction
        3. 7.4.2.3 Jabber Detection
        4. 7.4.2.4 Interleave Detection
      3. 7.4.3 MAC Interfaces
        1. 7.4.3.1 Media Independent Interface
        2. 7.4.3.2 Reduced Media Independent Interface
        3. 7.4.3.3 Reduced Gigabit Media Independent Interface
        4. 7.4.3.4 Serial Gigabit Media Independent Interface
      4. 7.4.4 Serial Management Interface
        1. 7.4.4.1 Extended Register Space Access
        2. 7.4.4.2 Write Operation (No Post Increment)
        3. 7.4.4.3 Read Operation (No Post Increment)
        4. 7.4.4.4 Write Operation (Post Increment)
        5. 7.4.4.5 Read Operation (Post Increment)
    5. 7.5 Output Slew Control
    6. 7.6 Programming
      1. 7.6.1 Strap Configuration
      2. 7.6.2 LED Configuration
  9. 8 Register Maps
    1. 8.1 Register Access Summary
    2. 8.2 DP83TC1104x Registers
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Applications
      1. 9.2.1 Design Requirements
        1. 9.2.1.1 Physical Medium Attachment
          1. 9.2.1.1.1 Common-Mode Choke Recommendations
      2. 9.2.2 Detailed Design Procedure
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
        1. 9.4.1.1 Signal Traces
        2. 9.4.1.2 Return Path
        3. 9.4.1.3 Metal Pour
        4. 9.4.1.4 PCB Layer Stacking
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Receiving Notification of Documentation Updates
    2. 10.2 Support Resources
    3. 10.3 Community Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)

Test Mode 4

Test mode 4 evaluates the transmitter distortion. In test mode 4, the DP83TC1104x-Q1 transmits the sequence of symbols generated by Equation 1:

Equation 1. g(x) = 1 + x9 + x11

The bit sequences, x0n and x1n, are generated from combinations of the scrambler in accordance to Equation 2 and Equation 3:

Equation 2. 'x0n = Scrn[0]
Equation 3. x1n = Scrn[1] ^ Scrn[4]

Example streams of the 3-bit nibbles are shown in Table 7-12.

Table 7-12 Transmitter Test Mode 4 Symbol Mapping
x1nx0nPAM3 SYMBOL
000
01+1
100
11–1

Test mode 4 is enabled by setting bits[15:13] = 0b100 in MMD1_PMA_TEST_MODE_CTRL Register (0x1836).