ZHCSMQ0I october   2004  – may 2023 TPS715-Q1

PRODUCTION DATA  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Revision History
  6. Pin Configuration and Functions
  7. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4.     Thermal Information
    5. 6.4 Electrical Characteristics
    6. 6.5 Typical Characteristics
  8. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagrams
    3. 7.3 Feature Description
      1. 7.3.1 Wide Supply Range
      2. 7.3.2 Low Quiescent Current
      3. 7.3.3 Dropout Voltage (VDO)
      4. 7.3.4 Current Limit
    4. 7.4 Device Functional Modes
      1. 7.4.1 Normal Operation
      2. 7.4.2 Dropout Operation
  9. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Detailed Design Procedure
        1. 8.2.1.1 Programming the TPS71501-Q1 Adjustable LDO Regulator
        2. 8.2.1.2 External Capacitor Requirements
        3. 8.2.1.3 Input and Output Capacitor Requirements
        4. 8.2.1.4 Reverse Current
        5. 8.2.1.5 Feed-Forward Capacitor (CFF)
        6. 8.2.1.6 Power Dissipation (PD)
        7. 8.2.1.7 Estimating Junction Temperature
      2. 8.2.2 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
        1. 8.4.1.1 Power Dissipation
      2. 8.4.2 Layout Example
  10. Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 Development Support
        1. 9.1.1.1 Evaluation Module
        2. 9.1.1.2 Spice Models
      2. 9.1.2 Device Nomenclature
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 接收文档更新通知
    4. 9.4 支持资源
    5. 9.5 Trademarks
    6. 9.6 静电放电警告
    7. 9.7 术语表
  11. 10Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • DCK|5
散热焊盘机械数据 (封装 | 引脚)
订购信息

说明

TPS715-Q1 低压降 (LDO) 线性稳压器是低静态电流器件,可提供采用微型封装、具有宽输入电压范围和实现低功耗运行的优势。因此,TPS715-Q1 专为电池供电型应用而设计,可用作低功耗微控制器的电源管理附件。

TPS715-Q1 有固定电压和可调节电压两种版本可供选用。为了获得更大的灵活性或更高的输出电压,可调节电压版本使用反馈电阻器将输出电压设置为 1.2V 至 15V。TPS715-Q1 LDO 在负载电流为 50mA 时支持典型值为 415mV 的低压降。低静态电流(典型值为 3.2µA)在整个输出负载电流(0mA 至 50mA)范围内都是稳定的。TPS715-Q1 还具有内部软启动功能,可降低浪涌电流。内置过流限制有助于在发生负载短路或故障时保护稳压器。

TPS715-Q1 采用 2.00mm × 1.25mm、5 引脚 SC-70 (DCK) 封装(对于固定和可调输出)。

封装信息
器件型号 封装(1)(2) 封装尺寸(标称值)
TPS715-Q1 DCK(SC70,5) 2.00mm × 1.25mm
如需了解所有可用封装,请参阅数据表末尾的可订购产品附录。
如需介于 1.8 V 和 5.0 V 之间的其他电压选项,请联系德州仪器 (TI)。

 

GUID-1151E9D9-4B74-4DB7-9573-E56344D75829-low.svgTPS715-Q1 的静态电流与负载电流之间的关系(仅限新芯片)
GUID-20230324-SS0I-BTMJ-RHMK-C0CBB4NVQ0KQ-low.svg典型应用原理图